{"title":"Fasteners","description":"","products":[{"product_id":"hammerhead-t-nuts-for-20-series-aluminium-extrusion","title":"Hammerhead T-Nuts for 20 Series Aluminium Extrusion","description":"\u003cp\u003eHammerhead (quarter-turn) T-nuts for 20 series aluminium extrusion with a 6mm slot. Unlike slide-in nuts you have to thread on from the end of a rail, these drop into the slot face-on and lock with a 90 degree twist - so you can add or reposition them after the frame is already built.\u003c\/p\u003e\u003cp\u003eThe oval head seats against the slot lips for a rigid, secure joint. Ideal for mounting panels, brackets, electronics, and accessories to a Voron or any 2020-based frame. Available in M3 and M5 threads, sold in packs.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"20 Series \/ M3 \/ 50","offer_id":44094877139166,"sku":"5602398179","price":4.49,"currency_code":"USD","in_stock":true},{"title":"20 Series \/ M3 \/ 100","offer_id":39612700065961,"sku":"6837483917","price":7.99,"currency_code":"USD","in_stock":true},{"title":"20 Series \/ M5 \/ 50","offer_id":44094877171934,"sku":"8208512650","price":4.49,"currency_code":"USD","in_stock":true},{"title":"20 Series \/ M5 \/ 100","offer_id":39612700164265,"sku":"1762879285","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/iu-6_0.5x.jpg?v=1626642602"},{"product_id":"roll-in-spring-nuts","title":"Roll-In Spring Nuts","description":"\u003cp\u003eRoll in spring nuts for Misumi 20 and 30 series aluminum extrusion. May, or may not, fit LDO frames. Both seem to be true, depending on when the frame was purchased.\u003c\/p\u003e\n\u003cp\u003e20 Series are sold in bags of 100\u003c\/p\u003e\n\u003cp\u003e30 Series are sold in bags of 10\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"20 Series \/ M3","offer_id":39612700393641,"sku":"4966717629","price":15.99,"currency_code":"USD","in_stock":false},{"title":"20 Series \/ M5","offer_id":39612700426409,"sku":"1742281618","price":15.99,"currency_code":"USD","in_stock":true},{"title":"30 Series \/ M5","offer_id":39612700459177,"sku":"CHAO-00000055","price":2.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled64.jpg?v=1660606445"},{"product_id":"openbuilds-angle-corner-connector","title":"Openbuilds Angle Corner Connector","description":"\u003cp\u003e\u003cstrong\u003eOpenBuilds black 90° angle corner connector for 20mm V-Slot and T-slot frames.\u003c\/strong\u003e Milled aluminum corner hardware for squaring and reinforcing extrusion joints on CNC, laser, and 3D-printer frame builds.\u003c\/p\u003e\n\u003ch3\u003eWhy use this connector\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e90° frame joints:\u003c\/strong\u003e made for attaching accessories or joining extrusion at a right angle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20mm extrusion fit:\u003c\/strong\u003e documented for 20mm V-Slot or T-slot profile systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack anodized aluminum:\u003c\/strong\u003e a compact metal bracket that blends into black OpenBuilds-style frames.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-use geometry:\u003c\/strong\u003e commonly used as a corner connector and, where the build calls for it, an adjustable wheel block.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePart: \u003cstrong\u003eOpenBuilds Black Angle Corner Connector\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eAngle: \u003cstrong\u003e90°\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaterial\/finish: \u003cstrong\u003emilled aluminum, black anodized\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eExtrusion compatibility: \u003cstrong\u003e20mm V-Slot \/ T-slot profile systems\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eTypical mounting hardware: \u003cstrong\u003eM5 × 8mm low-profile screws\u003c\/strong\u003e with M5 T-nuts; hardware is not included unless your order explicitly says otherwise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairings\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse with \u003ca href=\"https:\/\/dfh.fm\/products\/2020-extrusion\"\u003e2020 extrusion\u003c\/a\u003e for small machine frames, fixtures, enclosures, and accessory mounts.\u003c\/li\u003e\n  \u003cli\u003ePair with \u003ca href=\"https:\/\/dfh.fm\/products\/hammerhead-t-nuts-for-20-series-aluminium-extrusion\"\u003eHammerhead T-Nuts for 20 Series Aluminium Extrusion\u003c\/a\u003e when you need drop-in fastening on a 20-series slot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a single connector, not a multi-pack.\u003c\/li\u003e\n  \u003cli\u003eThis is for \u003cstrong\u003e20mm-series\u003c\/strong\u003e extrusion systems; do not buy it for 15-series MakerBeam or 30-series extrusion unless your build documentation specifically calls it out.\u003c\/li\u003e\n  \u003cli\u003eIt does not replace a full structural plate where your design needs high-rigidity gantry or load-bearing reinforcement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“They've got decent heft.” — verified buyer\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":39648769048745,"sku":"CHAO-00356743","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/ADJS_1_2019041hjgfuyt913427619_0.5x.jpg?v=1625415197"},{"product_id":"extruder-thumb-screw","title":"Extruder Thumb Screw","description":"\u003cp\u003e\u003cstrong\u003eKnurled extruder thumb screw assembly for idler-tension adjustment.\u003c\/strong\u003e This small hardware set includes the hand-adjustable thumb screw, compression spring, and washer\/retainer used to set filament drive pressure on BMG-style extruders and the Voron M4\/Mobius extruder BOM.\u003c\/p\u003e\n\u003ch3\u003eWhy use this instead of a plain screw?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKnurled head gives you quick, tool-free adjustment of extruder idler pressure.\u003c\/li\u003e\n\u003cli\u003eCompression spring keeps tension controlled while still letting the idler move with the filament path.\u003c\/li\u003e\n\u003cli\u003eWasher\/retainer helps keep the spring located against the printed or molded extruder idler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly type: \u003cstrong\u003eextruder idler thumb screw, spring, and washer\/retainer\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThread reference: \u003cstrong\u003eM3 x 0.5\u003c\/strong\u003e on Bondtech\/BMG-style thumbscrew assemblies; confirm against your extruder before ordering.\u003c\/li\u003e\n\u003cli\u003eKnown fit context: \u003cstrong\u003eVoron M4 \/ Mobius extruder BOM\u003c\/strong\u003e and Bondtech\/BMG-style or custom extruders that use this thumbscrew assembly.\u003c\/li\u003e\n\u003cli\u003eFinish: black knurled adjustment screw with spring hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon fitment\u003c\/h3\u003e\n\u003cp\u003eThe official Voron M4 sourcing guide lists one thumb screw assembly for the extruder hardware. For BMG-style service parts, pair it with the \u003ca href=\"https:\/\/dfh.fm\/products\/bmg-clone-components-kit\"\u003eBMG Clone Components Kit\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/bmg-clone-extruder-gears\"\u003eBMG Clone Extruder Gears\u003c\/a\u003e, or \u003ca href=\"https:\/\/dfh.fm\/products\/extruder-needle-bearings\"\u003eBMG Style Needle Bearings\u003c\/a\u003e when those are the parts you are replacing.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot an M4-threaded fastener. Here, \u003cstrong\u003eM4\u003c\/strong\u003e refers to the Voron M4\/Mobius extruder project fitment.\u003c\/li\u003e\n\u003cli\u003eNot a full extruder kit; this is only the thumb screw tension assembly.\u003c\/li\u003e\n\u003cli\u003eNot a universal bed-leveling, panel, or case thumb screw.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":39852704694441,"sku":"5870678528","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/thumbscrew.jpg?v=1693730195"},{"product_id":"makerbeam-xl-t-nut","title":"Makerbeam XL T-Nut","description":"\u003cp\u003e\u003cstrong\u003eSingle stainless M3 T-slot nut for MakerBeamXL and OpenBeam 15×15 mm extrusion.\u003c\/strong\u003e Slide it into the profile slot to fasten brackets, corner cubes, panels, and compact printer-frame hardware without buying a full 50-pack.\u003c\/p\u003e\n\u003ch3\u003eWhy use this nut\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for MakerBeamXL 15×15 mm T-slot grooves; MakerBeam lists this nut family as stainless steel and OpenBeam-compatible.\u003c\/li\u003e\n  \u003cli\u003eThreaded for M3 fasteners; KB-3D lists the matching single nut at about 0.24 in wide, 0.04 in thick, and 0.35 in long.\u003c\/li\u003e\n  \u003cli\u003eUseful for repairs, spares, and small builds where a full MakerBeamXL 50-pack is overkill.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 T-slot nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfile fit:\u003c\/strong\u003e MakerBeamXL \/ OpenBeam \u003cstrong\u003e15×15 mm\u003c\/strong\u003e aluminum extrusion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. dimensions:\u003c\/strong\u003e 0.24 in W × 0.04 in T × 0.35 in L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUse it with MakerBeamXL\/OpenBeam 1515 frames, Voron V0-style micro-printer projects, Micron\/Printers-for-Ants-style frames, and compact extrusion builds that call for M3 nuts in 15 mm MakerBeam-compatible slots.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNot the regular 10×10 mm MakerBeam nut.\u003c\/li\u003e\n  \u003cli\u003eNot a 2020\/20-series extrusion nut; for 2020 hardware use \u003ca href=\"https:\/\/dfh.fm\/products\/hammerhead-t-nuts-for-20-series-aluminium-extrusion\"\u003eHammerhead T-Nuts for 20 Series Aluminium Extrusion\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eScrews are not included. If you need a full printer hardware bag, see the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-v0-fasteners-kit\"\u003eVoron v0 Fasteners Kit\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003ePost-install\/no-drop holders are separate; see \u003ca href=\"https:\/\/dfh.fm\/products\/no-drop-nuts-for-european-standard-1515-extrusion\"\u003eNo-Drop Nuts for European Standard 1515 Extrusion\u003c\/a\u003e if that is the problem you're solving.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Makerbeam","offers":[{"title":"Default Title","offer_id":40427115315369,"sku":"2334350227","price":0.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_8453_0.5x.jpg?v=1627271573"},{"product_id":"voron-zip-tie-kit","title":"Voron Zip Tie Kit","description":"\u003cp\u003e\u003cstrong\u003eGeneral-purpose Voron zip-tie pack for cable routing and electronics-bay cleanup.\u003c\/strong\u003e Each kit includes \u003cstrong\u003e40 nylon 4\" zip ties\u003c\/strong\u003e plus \u003cstrong\u003e4 nylon 12\" zip ties\u003c\/strong\u003e for bundling printer wiring, securing harnesses, and finishing the small cable-management jobs that come up during a build.\u003c\/p\u003e\n\u003ch3\u003eWhy use this kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo useful lengths:\u003c\/strong\u003e 4\" ties handle small harnesses and printed tie-down points; 12\" ties cover larger wire bundles and temporary layout work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoron build support:\u003c\/strong\u003e Voron community assembly notes call out that zip ties are needed in multiple locations even when they are easy to miss in sourcing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady bench stock:\u003c\/strong\u003e enough ties for the normal “one more tie” moments without buying a giant bulk bag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContents: \u003cstrong\u003e40 × 4\" nylon zip ties\u003c\/strong\u003e and \u003cstrong\u003e4 × 12\" nylon zip ties\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: nylon cable ties\u003c\/li\u003e\n\u003cli\u003eUse: cable bundling, wire routing, electronics-bay organization, and printed cable tie points\u003c\/li\u003e\n\u003cli\u003eProject fit: Voron and other 3D-printer builds that use zip ties for wiring cleanup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and use\u003c\/h3\u003e\n\u003cp\u003eUse this as the standard tie pack for Voron wiring cleanup, especially around frame routing, harness bundling, and the electronics bay. For tighter printed channels or smaller wire bundles, use the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-slim-zip-tie-kit\"\u003eVoron Slim Zip-Tie Kit\u003c\/a\u003e. For fuller cable-management work, pair it with \u003ca href=\"https:\/\/dfh.fm\/products\/30awg-stranded-fep-wire-x-10m\"\u003e30AWG Stranded FEP Wire\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/igus-chainflex%C2%AE-cf113-007-d\"\u003eIgus Chainflex® CF113-007-D\u003c\/a\u003e, or the \u003ca href=\"https:\/\/dfh.fm\/products\/four-piece-wire-channel\"\u003eFour Piece Wire Channel\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eNot for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStructural fastening or load-bearing mechanical clamps.\u003c\/li\u003e\n\u003cli\u003eHeat-soaked locations where a cable tie could sit directly against hotend, heater, or mains wiring insulation.\u003c\/li\u003e\n\u003cli\u003eBuilders who need only ultra-slim 2mm ties; choose the slim kit instead.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":40660399194281,"sku":"9413114926","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/black_zip.jpg?v=1623807162"},{"product_id":"voron-slim-zip-tie-kit","title":"Voron Slim Zip-Tie Kit","description":"\u003cp\u003e\u003cstrong\u003eSlim Voron zip-tie pack for tight cable routing.\u003c\/strong\u003e Each kit includes \u003cstrong\u003e40 nylon zip ties\u003c\/strong\u003e sized for small harnesses and printed tie-down points: \u003cstrong\u003e2mm wide\u003c\/strong\u003e, with \u003cstrong\u003e100-150mm lengths\u003c\/strong\u003e depending on color.\u003c\/p\u003e\n\u003ch3\u003eWhy use the slim ties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower bulk than standard ties:\u003c\/strong\u003e easier to pass through compact printed channels and around small wire bundles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoron-friendly lengths:\u003c\/strong\u003e sized for toolhead wiring, electronics-bay cleanup, and general frame cable management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor choice:\u003c\/strong\u003e Black blends into most printer interiors; Clear keeps wiring runs visually lighter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContents: \u003cstrong\u003e40 zip ties\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNominal width: \u003cstrong\u003e2mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLength range: \u003cstrong\u003e100-150mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVariants: \u003cstrong\u003eBlack\u003c\/strong\u003e or \u003cstrong\u003eClear\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: nylon cable ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and use\u003c\/h3\u003e\n\u003cp\u003eUse these for small cable bundles on Voron builds, especially where a full-size tie is bulky or hard to route. If you need the larger general-purpose tie bundle instead, use the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-zip-tie-kit\"\u003eVoron Zip Tie Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eNot for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-load mechanical fastening; these are cable-management ties, not structural clamps.\u003c\/li\u003e\n\u003cli\u003eLarge frame bundles where a wider 4-inch or 12-inch tie is a better fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Excellent zip ties for Voron 2.4r2.”\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Black","offer_id":42707221086430,"sku":"2045699125","price":3.0,"currency_code":"USD","in_stock":false},{"title":"Clear","offer_id":42707221119198,"sku":"4005743958","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled5.jpg?v=1623807433"},{"product_id":"epdm-rubber-feet-set-of-4","title":"EPDM Rubber Feet - Set of 4","description":"\u003cp\u003e\u003cstrong\u003eCompact EPDM rubber feet for quieter, steadier printer builds.\u003c\/strong\u003e This set of four C-30-RK-3215-style rubber feet gives a Voron or small Printer-for-Ants build a low-profile, vibration-damping base without taking up the larger footprint of oversized machine feet.\u003c\/p\u003e\n\u003ch3\u003eWhy use these instead of printed feet?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter vibration control:\u003c\/strong\u003e EPDM rubber helps isolate motor and motion noise from the table, so the printer is less likely to walk or buzz on hard surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint:\u003c\/strong\u003e the roughly \u003cstrong\u003e32 mm diameter x 15 mm tall\u003c\/strong\u003e body is a good middle ground between tiny V0-style feet and the larger Trident\/V2.4 rubber feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWasher-supported mounting:\u003c\/strong\u003e the recessed center washer spreads screw load so the foot can be tightened securely without tearing the rubber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 rubber feet — one set is enough for one typical printer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e EPDM rubber foot with internal metal washer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal size:\u003c\/strong\u003e 32 mm outside diameter, 15 mm height; C-30-RK-3215-style form factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e center screw mount for M5 hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 65° ± 5° Shore, as supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e vibration damping, anti-slip support, and table clearance for compact 3D printer frames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eGood for Voron printers and compact Printer-for-Ants builds such as Micron and Salad Fork. If you are building around the \u003ca href=\"https:\/\/dfh.fm\/products\/micron-frame\"\u003eMicron Classic Frame\u003c\/a\u003e, these are the compact rubber feet to use when you want a proper damped base instead of a printed foot. For 1515-extrusion builds, pair with \u003ca href=\"https:\/\/dfh.fm\/products\/no-drop-nuts-for-european-standard-1515-extrusion\"\u003eNo-Drop Nuts for European Standard 1515 Extrusion\u003c\/a\u003e when the build calls for captured M5 hardware.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis listing is for the \u003cstrong\u003efeet only\u003c\/strong\u003e; frame hardware, screws, and extrusion nuts are not included unless shown elsewhere in your build BOM.\u003c\/li\u003e\n\u003cli\u003eThese are compact feet. If your printer BOM calls for taller\/heavier machine feet, check the specified foot size before substituting.\u003c\/li\u003e\n\u003cli\u003eCompatible C-30-RK-3215-style part, not a Misumi-branded retail pack.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":40949401452713,"sku":"8037126833","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled19.jpg?v=1627590622"},{"product_id":"titanium-extrusion-backers","title":"Titanium Extrusion Backers - by Lightweight Labware","description":"\u003cp\u003eTitanium Extrusion Backers from Lightweight Labware give the absolute best performance for Voron Trident and V2.4 models. Made from the highest grade titanium and delivered in a custom box - mostly dog hair free guarantee!  Visit the \u003ca href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/extrusion_backers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egithub repo\u003c\/a\u003e for more info. \u003c\/p\u003e","brand":"Lightweight Labware","offers":[{"title":"250mm","offer_id":41043803898025,"sku":"6102938364","price":65.0,"currency_code":"USD","in_stock":true},{"title":"300mm","offer_id":41043803865257,"sku":"1713752024","price":70.0,"currency_code":"USD","in_stock":true},{"title":"350mm","offer_id":41043803832489,"sku":"7193835479","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/bimage0-1.jpg?v=1641519509"},{"product_id":"backers-screw-set","title":"Backers Screw Set","description":"\u003cp\u003e\u003cstrong\u003eReplacement screw set for Lightweight Labware extrusion backers.\u003c\/strong\u003e Covers the flat-head M3 screws used to fasten Voron backers to 2020 extrusion; choose black oxide, stainless steel, or titanium.\u003c\/p\u003e\n\u003ch3\u003eWhy these screws\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSized for \u003ca href=\"https:\/\/dfh.fm\/products\/titanium-extrusion-backers\"\u003eLightweight Labware Titanium Extrusion Backers\u003c\/a\u003e and the Voron extrusion-backer install pattern.\u003c\/li\u003e\n\u003cli\u003eFlat-head profile sits cleanly in countersunk backer plates instead of standing proud of the extrusion.\u003c\/li\u003e\n\u003cli\u003eUse with M3 post-assembly\/hammerhead T-nuts in 20-series extrusion; pair with \u003ca href=\"https:\/\/dfh.fm\/products\/hammerhead-t-nuts-for-20-series-aluminium-extrusion\"\u003eHammerhead T-Nuts for 20 Series Aluminium Extrusion\u003c\/a\u003e when you need nuts too.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack oxide \/ stainless steel set:\u003c\/strong\u003e 10 × M3x6mm flat-head screws and 20 × M3x8mm flat-head screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium set:\u003c\/strong\u003e 30 × custom Ti M3x7mm flat-head Torx screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M3 metric, intended for M3 T-nuts in 2020\/20-series printer extrusion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor Voron V2.4 and Trident extrusion-backer installs using Lightweight Labware backers.\u003c\/li\u003e\n\u003cli\u003eBackers mount opposite the linear rail: top of Y extrusions and rear\/top of X depending on rail layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBacker plates, T-nuts, Torx key, rails, extrusion, or printed parts.\u003c\/li\u003e\n\u003cli\u003eCheck your backer material and countersink before forcing screws; M3 flat heads are easy to strip if misaligned.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Backer screws for your Ti or SS backers… make the install dead simple.”\u003c\/blockquote\u003e","brand":"Lightweight Labware","offers":[{"title":"Black Oxide","offer_id":41599912870057,"sku":"9171298167","price":6.99,"currency_code":"USD","in_stock":false},{"title":"Stainless Steel","offer_id":41613537444009,"sku":"9175637723","price":6.99,"currency_code":"USD","in_stock":false},{"title":"Titanium","offer_id":41613540425897,"sku":"9638257371","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/9171298167.jpg?v=1632680744"},{"product_id":"shim-washers","title":"Shim Washers","description":"\u003cp\u003e\u003cstrong\u003eMetric shim washers for 3D-printer motion alignment.\u003c\/strong\u003e Sold in packs of \u003cstrong\u003e100\u003c\/strong\u003e, with M3- and M5-size options for tuning bearing, pulley, and idler stacks without relying on the loose thickness of standard washers.\u003c\/p\u003e\n\u003ch3\u003eWhy use shims instead of general washers?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVoron documentation notes that standard M5 washers can vary by \u003cstrong\u003e±0.2 mm\u003c\/strong\u003e, and recommends \u003cstrong\u003e1 mm\u003c\/strong\u003e shims or \u003cstrong\u003e0.5 mm\u003c\/strong\u003e washers when pulley and bearing alignment needs fine adjustment.\u003c\/li\u003e\n\u003cli\u003eThin shims can be stacked to dial in spacing in small increments instead of forcing a belt path or bearing stack to accept whatever washer you have on hand.\u003c\/li\u003e\n\u003cli\u003eUseful around motion hardware, including \u003ca href=\"https:\/\/dfh.fm\/products\/f623-rs-bearings\"\u003eF623-RS Bearings\u003c\/a\u003e and \u003ca href=\"https:\/\/dfh.fm\/products\/f695-2rs-flanged-ball-bearing\"\u003eF695-2RS Flanged Ball Bearings\u003c\/a\u003e, when the assembly needs a small spacing correction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack quantity: \u003cstrong\u003e100 shim washers\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAvailable sizes: \u003cstrong\u003e3 x 6 x 0.5 mm\u003c\/strong\u003e, \u003cstrong\u003e5 x 10 x 0.5 mm\u003c\/strong\u003e, and \u003cstrong\u003e5 x 10 x 1 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize format: \u003cstrong\u003einside diameter x outside diameter x thickness\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse case: precision spacing for 3D-printer motion, bearing, pulley, and idler assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 x 6 mm\u003c\/strong\u003e shims fit M3 hardware stacks where the outside diameter must stay compact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 10 mm\u003c\/strong\u003e shims fit M5 hardware stacks; choose \u003cstrong\u003e0.5 mm\u003c\/strong\u003e for fine adjustment or \u003cstrong\u003e1 mm\u003c\/strong\u003e when replacing a nominal 1 mm washer with tighter spacing control.\u003c\/li\u003e\n\u003cli\u003eCommon fit context includes Voron V0, V1, V2, Trident\/Switchwire-style motion assemblies, and other printer builds that need pulley or bearing spacing tuned during assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a structural washer kit for general load spreading.\u003c\/li\u003e\n\u003cli\u003eNot a mixed assortment; select the exact size you need from the variants.\u003c\/li\u003e\n\u003cli\u003eCheck your manual and measure the stack before ordering; shim thickness is selected by the gap you need to correct.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"3x6x.05mm","offer_id":41612755599529,"sku":"1080638982","price":5.99,"currency_code":"USD","in_stock":true},{"title":"5x10x.05mm","offer_id":41612755632297,"sku":"3365844845","price":5.99,"currency_code":"USD","in_stock":true},{"title":"5x10x1mm","offer_id":41612755665065,"sku":"1548970459","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/wererw_b685aeab-0437-4d7a-8e00-fac9b55320db.jpg?v=1650662053"},{"product_id":"steel-extrusion-backers","title":"Steel Extrusion Backers - by Lightweight Labware","description":"\u003cp\u003ePowder coated steel, this round.\u003c\/p\u003e\n\u003cdiv class=\"product-single__description rte\"\u003e\n\u003cp\u003eFull set of 3 steel extrusion backers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits, both, Trident and V2.4.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eShips in a custom, \u003cstrong\u003edog hair free\u003c\/strong\u003e, box.\u003c\/p\u003e\n\u003cp\u003eTons of info may be found in the github repo, \u003ca aria-describedby=\"a11y-new-window-external-message\" href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/extrusion_backers\" title=\"backers GitHub\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Read it. It's amazing work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-id=\"7144971206825\" id=\"shopify-product-reviews\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003eTi backers are located \u003ca href=\"https:\/\/deepfriedhero.in\/products\/titanium-extrusion-backers?variant=41043803865257\" title=\"ti backers\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Lightweight Labware","offers":[{"title":"250 \/ That's a Fee - Purple","offer_id":42065000562910,"sku":"5844512716","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ Funke - Blue","offer_id":42065000595678,"sku":"1646519587","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ Banana for Scale - Yellow","offer_id":42065000628446,"sku":"4878115425","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ Slightly Darker - Black","offer_id":42065000661214,"sku":"5874954923","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ I Demand to Speak With the Manager - White","offer_id":42065000693982,"sku":"2877150973","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ Two in the - Pink","offer_id":42065000726750,"sku":"8596088361","price":45.0,"currency_code":"USD","in_stock":true},{"title":"300 \/ That's a Fee - Purple","offer_id":42065000759518,"sku":"3665683065","price":50.0,"currency_code":"USD","in_stock":false},{"title":"300 \/ Funke - Blue","offer_id":42065000792286,"sku":"3204727191","price":50.0,"currency_code":"USD","in_stock":false},{"title":"300 \/ Banana for Scale - Yellow","offer_id":42065000825054,"sku":"8266487956","price":50.0,"currency_code":"USD","in_stock":true},{"title":"300 \/ Slightly Darker - Black","offer_id":42065000857822,"sku":"2422430560","price":50.0,"currency_code":"USD","in_stock":true},{"title":"300 \/ I Demand to Speak With the Manager - White","offer_id":42065000890590,"sku":"3201567830","price":50.0,"currency_code":"USD","in_stock":true},{"title":"300 \/ Two in the - Pink","offer_id":42065000923358,"sku":"1121656021","price":50.0,"currency_code":"USD","in_stock":true},{"title":"350 \/ That's a Fee - Purple","offer_id":42065000956126,"sku":"2706681244","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ Funke - Blue","offer_id":42065000988894,"sku":"6346956565","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ Banana for Scale - Yellow","offer_id":42065001021662,"sku":"8124380777","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ Slightly Darker - Black","offer_id":42065001054430,"sku":"5490290489","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ I Demand to Speak With the Manager - White","offer_id":42065001087198,"sku":"5579312471","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ Two in the - Pink","offer_id":42065001119966,"sku":"4689755065","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled38_1ad8de42-e7a0-4a52-8119-1c74d3792d43.png?v=1653541782"},{"product_id":"ramas-front-idlers-for-voron-v2","title":"Rama's Front Idlers for Voron v2","description":"\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x M3x30 SHCS (Full threaded) or M3x40 SHCS (Full threaded)\u003c\/li\u003e\n\u003cli\u003e2x M3x8 or M3x10\u003c\/li\u003e\n\u003cli\u003e4x M3 Washer\u003c\/li\u003e\n\u003cli\u003e4x M5 Washer\u003c\/li\u003e\n\u003cli\u003e4x M3-Inserts\u003c\/li\u003e\n\u003cli\u003e4x F695-2RS bearing\u003c\/li\u003e\n\u003cli\u003e2x 5x18 Pin (g6)\u003c\/li\u003e\n\u003cli\u003e4x 3x6 Magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInformation is available on \u003ca href=\"https:\/\/github.com\/Ramalama2\/Voron-2-Mods\/tree\/main\/Front_Idlers\" title=\"rama idler git\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42099863716062,"sku":"5373475629","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/5427A599-2755-4A8F-9D2F-C1B8F6CDF1B7_1_105_c.jpg?v=1637633833"},{"product_id":"spring-clips-m5-20-series","title":"Spring Clips M5 20 Series","description":"\u003cp\u003e\u003cstrong\u003ePack of 10 M5 spring clips for 20-series aluminum extrusion.\u003c\/strong\u003e These stamped spring clips help keep M5 hardware aligned while you square and fasten 2020-class printer frames.\u003c\/p\u003e\n\u003ch3\u003eWhy use spring clips?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHelp keep M5 hardware from wandering while you position brackets, plates, or slot fasteners.\u003c\/li\u003e\n  \u003cli\u003eUseful on vertical faces, tight frame corners, and repeated adjust-and-square assembly passes.\u003c\/li\u003e\n  \u003cli\u003eA cheap bench consumable to keep with your \u003ca href=\"https:\/\/dfh.fm\/products\/2020-extrusion\"\u003e2020 extrusion\u003c\/a\u003e and \u003ca href=\"https:\/\/dfh.fm\/products\/hammerhead-t-nuts-for-20-series-aluminium-extrusion\"\u003e20-series M5 T-nuts\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSeries fit: \u003cstrong\u003e20-series \/ 2020-class aluminum extrusion\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eFastener hole: \u003cstrong\u003eM5\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eQuantity: \u003cstrong\u003e10 spring clips\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eConstruction: black stamped spring-steel clip, as pictured\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUse these on 20-series printer frames, enclosures, and fixture builds where the design calls for M5 hardware. They are a good match for Voron-style frames, ERCF accessories, LH Stinger\/Mercury One.1 style 2020 builds, and other DIY machines using 20-series extrusion.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNot a threaded T-nut. Pair it with the correct M5 screw, nut, bracket, or other fastening hardware for your build.\u003c\/li\u003e\n  \u003cli\u003eNot for 30-series \/ M8 extrusion assemblies; use the \u003ca href=\"https:\/\/dfh.fm\/products\/spring-clip-for-30-series-extrusion\"\u003e30-series spring clip\u003c\/a\u003e for that use case.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42410616029406,"sku":"6126115476","price":1.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0753_0.5x.png?v=1643507182"},{"product_id":"binding-screw-5x25mm","title":"Binding Screw - 5x25mm","description":"\u003cp\u003e\u003cstrong\u003e5 mm x 25 mm binding screw post for removable panel and printer-mod joints.\u003c\/strong\u003e This is the post\/barrel side only: a silver-tone Chicago-screw style barrel with a flat head, sized for projects that call for a 5 mm outside-diameter, 25 mm long binding post.\u003c\/p\u003e\n\u003ch3\u003eWhy use a binding post here\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean removable joint:\u003c\/strong\u003e the post gives a broad, finished head on one side of the assembly instead of a loose nut or exposed spacer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUseful for sexbolt-style mods:\u003c\/strong\u003e works as the barrel\/post component in printer mods and fixtures that specify a 5 mm binding post, including Voron-style endstop experiments when the required length matches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver-tone metal finish:\u003c\/strong\u003e suitable for visible hardware where a plain socket screw would look unfinished.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost outside diameter:\u003c\/strong\u003e 5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost length:\u003c\/strong\u003e 25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener style:\u003c\/strong\u003e binding post \/ Chicago screw barrel \/ sexbolt post\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e silver-tone plated metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e post\/barrel only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse it for panel fastening, bookbinding-style joints, fixtures, and 3D-printer mods where the BOM calls for a 5 mm x 25 mm binding post. If you need a complete barrel-and-screw set instead of the post alone, compare against the live \u003ca href=\"https:\/\/dfh.fm\/products\/m4-nickel-plated-slot-head-binding-barrels-and-screws\"\u003eM4 nickel-plated binding barrels and screws\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot a complete screw set:\u003c\/strong\u003e this listing is for the post\/barrel only; it does not include the mating machine screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot automatically correct for every sexbolt BOM:\u003c\/strong\u003e many printer-mod BOMs specify a particular barrel length, often 20 mm, so check the required length before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot a standard M5 machine screw:\u003c\/strong\u003e “5 mm” describes the post\/barrel size, not a normal external screw thread.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42536415396062,"sku":"2665463515","price":0.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/4B33B863-925F-42A4-A79E-9CB5D799100C.png?v=1647560803"},{"product_id":"post-install-leaf-spring-nuts-20-series-m5","title":"Post Install Leaf Spring Nuts - 20 Series - M5","description":"\u003cp\u003eThe T-Nuts will fit in 20 Series extrusion and can be loaded from the side or the end. These Nuts are great for when the extrusion ends are not accessible or when having the T-Nut remain in place in vertical applications.\u003c\/p\u003e\n\u003cp\u003eSold in packs of 25.\u003c\/p\u003e\n\u003cp\u003eThese have only been tested on Misumi extrusion, circa early 2021. With the wide variety of extrusion available, I can't promise these will fit yours. \u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42592702988510,"sku":"1006511237","price":4.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/91FCA3B1-C2AF-4436-8577-D0077353464D_1_105_c.png?v=1647850539"},{"product_id":"micron-backers","title":"Micron Extrusion Backers","description":"\u003cp\u003e\u003cstrong\u003eSet of three extrusion backer plates for the 120mm Printers for Ants Micron.\u003c\/strong\u003e These backers are based on the Lightweight Labware \/ whoppingpochard extrusion-backer concept: add a matching metal strip opposite the linear rail to help reduce gantry movement from thermal expansion mismatch between rail and extrusion.\u003c\/p\u003e\n\u003ch3\u003eWhy this part\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for the small \u003ca href=\"https:\/\/dfh.fm\/products\/micron-frame\"\u003eMicron Classic \/ 120mm Micron frame\u003c\/a\u003e, not the larger 180mm Micron+ layout.\u003c\/li\u003e\n\u003cli\u003eUseful when you are trying to keep the 1515 gantry behavior more consistent across cold-start and heat-soaked chamber conditions.\u003c\/li\u003e\n\u003cli\u003eSeparate backer-only option if you do not need the bundled nut bars from the \u003ca href=\"https:\/\/dfh.fm\/products\/micron-120-titanium-backers-and-nut-bars-set\"\u003eMicron 120 Titanium Backers and Nut Bars Set\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded parts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 ×\u003c\/strong\u003e Micron 120 extrusion backer plates.\u003c\/li\u003e\n\u003cli\u003eBacker hardware is not included; pair with the \u003ca href=\"https:\/\/dfh.fm\/products\/backers-screw-set\"\u003eBackers Screw Set\u003c\/a\u003e if you need dedicated screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor Printers for Ants Micron 120 \/ Micron Classic builds using the 1515 extrusion frame.\u003c\/li\u003e\n\u003cli\u003ePairs naturally with the \u003ca href=\"https:\/\/dfh.fm\/products\/micron-motion-kit\"\u003eMicron Motion Kit\u003c\/a\u003e during a fresh gantry build or rebuild.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is not a full frame kit, motion kit, rail kit, screw kit, or nut-bar set.\u003c\/li\u003e\n\u003cli\u003eDo not buy this for a 180mm Micron+ build unless you have separately verified the backer lengths you need.\u003c\/li\u003e\n\u003cli\u003eInstall backers opposite the relevant rail and check the Micron\/backer documentation before final tightening.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lightweight Labware","offers":[{"title":"Default Title","offer_id":42730674520286,"sku":"5280577115","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_1532.png?v=1651532654"},{"product_id":"no-drop-nuts-for-european-standard-1515-extrusion","title":"No-Drop Nuts for European Standard 1515 Extrusion","description":"\u003cp\u003e\u003cstrong\u003eStop chasing loose M3 nuts through 1515 extrusion.\u003c\/strong\u003e This 50-pack of injection-molded no-drop nut holders keeps nuts positioned in European-standard \/ LDO-style 1515 aluminum extrusion during Voron V0 and Printers for Ants builds.\u003c\/p\u003e\n\u003ch3\u003eWhy use no-drop nut holders?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHolds M3 hex or square nuts in the extrusion slot so panels, bed parts, rails, and brackets line up instead of sliding out of reach.\u003c\/li\u003e\n\u003cli\u003eBased on the zruncho V0 No-Drop Nuts concept documented in the Voron user mods repo and recommended by LDO for 1515 nut handling.\u003c\/li\u003e\n\u003cli\u003eUseful anywhere you need repeated 1515 fastener alignment, especially small-format builds like \u003ca href=\"https:\/\/dfh.fm\/products\/micron-frame-1\"\u003eMicron\u003c\/a\u003e, Salad Fork, Pandora, and other Printers for Ants machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 50 no-drop nut holders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtrusion fit:\u003c\/strong\u003e European-standard \/ LDO-style \u003cstrong\u003e1515\u003c\/strong\u003e aluminum extrusion slots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNut fit:\u003c\/strong\u003e for common \u003cstrong\u003eM3\u003c\/strong\u003e hex or square nuts used in 1515 printer frames\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e injection-molded plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuild notes\u003c\/h3\u003e\n\u003cp\u003eUse these as assembly aids when loading fasteners for frame, panel, skirt, rail, and bed-related hardware. Pair them with the \u003ca href=\"https:\/\/dfh.fm\/products\/salad-fork-fastener-kit\"\u003eSalad Fork Fasteners Kit\u003c\/a\u003e when you are building a Salad Fork-style 1515 frame.\u003c\/p\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a pack of metal nuts — these are the plastic holders only.\u003c\/li\u003e\n\u003cli\u003eNot for MakerBeam XL or OpenBeam extrusion; the original No-Drop Nuts documentation calls those profiles out as incompatible.\u003c\/li\u003e\n\u003cli\u003eNot a substitute for a loaded nut bar or a structural fastener.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43166564516062,"sku":"2557601793","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_2455.jpg?v=1658674698"},{"product_id":"salad-fork-fastener-kit","title":"Salad Fork Fasteners Kit","description":"\u003cp\u003eFastener kits for the Salad Fork 3D printer. I've bumped up the count by ~1.4x. Extras are good for snacks.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x6 BHCS\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x10 Self-Tapping\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x12 SHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Washer\u003c\/td\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x6 BHCS\u003c\/td\u003e\n\u003ctd\u003e86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x6 SHCS\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x8 BHCS\u003c\/td\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x8 SHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x10 BHCS\u003c\/td\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x10 SHCS\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x12 BHCS\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x12 SHCS\u003c\/td\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x16 SHCS\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x20 SHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x25 BHCS\u003c\/td\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x25 SHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x30 BHCS\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x35 BHCS\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x35 SHCS\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM5x10 BHCS\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM5x16 BHCS\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM5 Hex Nut\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Lock Nut\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Hex Nut\u003c\/td\u003e\n\u003ctd\u003e234\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2 Hex Nut\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 (5x4) Heatset Insert\u003c\/td\u003e\n\u003ctd\u003e51\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM4 Knurled Nut\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e6x3 Neodymium Magnets\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"dfh.fm","offers":[{"title":"Stainless Steel","offer_id":43167190876382,"sku":"7001443672","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Black Oxide","offer_id":43167190909150,"sku":"2050002516","price":55.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_2459.jpg?v=1658691074"},{"product_id":"voron-v0-fasteners-kit","title":"Voron v0 Fasteners Kit","description":"\u003cp\u003eFastener kits for the Voron v0 3D printer. I've bumped up the count by ~1.3x. Extras are good for snacks.\u003c\/p\u003e\n\u003cp\u003eKit comes in three versions: Stainless Steel, Black oxide coated alloy steel and Black nickel coated stainless steel. \u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Washer - 6mm OD - 3mm ID - 0.5mm\u003c\/td\u003e\n\u003ctd\u003e42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2 Nut\u003c\/td\u003e\n\u003ctd\u003e66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Nut\u003c\/td\u003e\n\u003ctd\u003e144\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Lock Nut\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x6 BHCS\/SHCS\u003c\/td\u003e\n\u003ctd\u003e84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x6 FHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x8 SHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2.5x6 BHCS\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x6 BHCS\u003c\/td\u003e\n\u003ctd\u003e48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x8 BHCS\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x10 BHCS\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x12 BHCS\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x16 BHCS\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x25 BHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x30 BHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x35 BHCS\u003c\/td\u003e\n\u003ctd\u003e36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x40 BHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x10 Self Tapping Screws for Plastic\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMakerbeam XL M3 t-nut\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Brass Heatset Inserts - Short M3x5x4\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"dfh.fm","offers":[{"title":"Stainless Steel","offer_id":43167323488478,"sku":"6619748592","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Black Oxide Coated Alloy Steell","offer_id":43167323521246,"sku":"6844694650","price":36.99,"currency_code":"USD","in_stock":false},{"title":"Black Nickel Coated Stainless Steell","offer_id":44380726853854,"sku":null,"price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_2463.jpg?v=1658694709"},{"product_id":"micron-120-titanium-backers-and-nut-bars-set","title":"Micron 120 Titanium Backers and Nut Bars Set","description":"\u003cp\u003e\u003cstrong\u003eTitanium gantry backers and nut bars for the 120mm Printers for Ants Micron.\u003c\/strong\u003e This set packages the Micron 120 backer plates and rail\/nut bars for a cleaner small-format gantry build on 1515 extrusion.\u003c\/p\u003e\n\u003ch3\u003eWhy this set\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt around the 120mm Micron \/ Micron Classic size, not the larger 180mm Micron+ hardware set.\u003c\/li\u003e\n\u003cli\u003eTitanium backers follow the Lightweight Labware \/ whoppingpochard backer concept: add a matching metal strip opposite the linear rail to reduce gantry movement from thermal expansion mismatch between rail and extrusion.\u003c\/li\u003e\n\u003cli\u003eCombines the backers and nut bars in one checkout line instead of making you piece the small hardware rails together separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded parts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × 208mm\u003c\/strong\u003e nut bar with \u003cstrong\u003eM3\u003c\/strong\u003e threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 × 190mm\u003c\/strong\u003e nut bars with \u003cstrong\u003eM2\u003c\/strong\u003e threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × X\u003c\/strong\u003e titanium backers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional 1 × Y\u003c\/strong\u003e titanium backer — choose the “Yep” variant if you want the Y backer included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor the \u003ca href=\"https:\/\/dfh.fm\/products\/micron-frame\"\u003eMicron Classic \/ 120mm Micron frame\u003c\/a\u003e and compatible Printers for Ants Micron 120 builds.\u003c\/li\u003e\n\u003cli\u003eUse with the official Micron 120-style 1515 extrusion frame; the official BOM lists 120mm Micron as the smaller build with 160mm-class rails.\u003c\/li\u003e\n\u003cli\u003ePairs with the \u003ca href=\"https:\/\/dfh.fm\/products\/backers-screw-set\"\u003eBackers Screw Set\u003c\/a\u003e if you need dedicated backer screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is not a full frame kit, rail kit, or screw kit.\u003c\/li\u003e\n\u003cli\u003eDo not use this for 180mm Micron+ unless you have separately verified the lengths you need.\u003c\/li\u003e\n\u003cli\u003eBackers work by being installed opposite the relevant linear rail; check the Micron docs and backer documentation before tightening everything down.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lightweight Labware","offers":[{"title":"Yep","offer_id":43287518839006,"sku":"9257259672","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Nope","offer_id":43287518871774,"sku":"8846117595","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_2738.jpg?v=1660802306"},{"product_id":"ldo-post-install-drop-in-m3-nuts-for-european-standard-extrusion","title":"LDO Post-Install Drop-In M3 Nuts for European Standard 1515 Extrusion","description":"\u003cp\u003e\u003cstrong\u003ePost-install M3 slide-in nuts for LDO-style European-standard 1515 extrusion.\u003c\/strong\u003e This 20-piece LDO pack lets you add M3 mounting points after a compact printer frame is already assembled, without tearing the frame back apart.\u003c\/p\u003e\n\u003ch3\u003eWhy use these instead of preload nuts?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to slide\/roll into 1515 aluminum extrusion after assembly, so a missed nut does not turn into a rebuild.\u003c\/li\u003e\n  \u003cli\u003eThreaded for \u003cstrong\u003eM3 fasteners\u003c\/strong\u003e and sold as a \u003cstrong\u003e20-piece pack\u003c\/strong\u003e for Voron V0 \/ V0.1 \/ V0.2 and other 1515-frame printer work.\u003c\/li\u003e\n  \u003cli\u003eBest fit is LDO \/ Misumi-style European 1515 profile; West3D and KB-3D both list this LDO part specifically for LDO 1515 extrusions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e European-standard \/ LDO-style 1515 aluminum extrusion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstall style:\u003c\/strong\u003e post-assembly slide-in \/ roll-in T-slot nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 20 nuts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e LDO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse these when adding panels, lighting, Nevermore mounts, toolhead accessories, or other M3-mounted parts to an already-built 1515 frame.\u003c\/li\u003e\n  \u003cli\u003eFor printed nut retainers that keep regular M3 nuts from sliding inside LDO-style 1515 extrusion, see \u003ca href=\"https:\/\/dfh.fm\/products\/no-drop-nuts-for-european-standard-1515-extrusion\"\u003eNo-Drop Nuts for European Standard 1515 Extrusion\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eIf you are working with MakerBeamXL\/OpenBeam-style 1515 extrusion instead, use the \u003ca href=\"https:\/\/dfh.fm\/products\/makerbeam-xl-t-nut\"\u003eMakerBeam XL T-Nut\u003c\/a\u003e instead of assuming cross-fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot universal 1515 hardware.\u003c\/strong\u003e West3D states these only work in LDO frames, and dfh customer reviews report non-fit on MakerBeamXL, generic AliExpress, and some Siboor extrusions.\u003c\/li\u003e\n  \u003cli\u003eThese are loose metal nuts, not printed retainers; if you want nut-positioning support, pair them with a compatible no-drop holder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Forgot to preload a nut during assembly? Now you don't have to disassemble your frame at all.” — verified dfh buyer\u003c\/blockquote\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":43395888709854,"sku":"2482914462","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/1515EXT_SlideIn_M3Tnut-1.jpg?v=1679466175"},{"product_id":"polyformer-fasteners-kit","title":"Polyformer Fasteners Kit","description":"\u003cp\u003eFasteners Kit for Polyformer.\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM3x6 BHCS x 17\u003c\/li\u003e\n\u003cli\u003eM3x8 BHCS x 47\u003c\/li\u003e\n\u003cli\u003eM3x12 BHCS x 70\u003c\/li\u003e\n\u003cli\u003eM3x20 BHCS x 11\u003c\/li\u003e\n\u003cli\u003eM3x30 BHCS x 10\u003c\/li\u003e\n\u003cli\u003eM3 Alloy Steel Washers x 14\u003c\/li\u003e\n\u003cli\u003eM3 Nuts x 15\u003c\/li\u003e\n\u003cli\u003e3x5x4mm Threaded Inserts x 130\u003c\/li\u003e\n\u003cli\u003e6x3mm Round Neodymium Magnets x 15\u003c\/li\u003e\n\u003cli\u003eM2 Allen Key\u003c\/li\u003e\n\u003cli\u003e1.7mm HSS Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull kit available \u003ca title=\"DFH Polyformer Kit\" href=\"https:\/\/dfh.fm\/products\/polyformer-kit-by-reiten966?\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eFind more information on \u003c\/span\u003e\u003ca title=\"polyformer github\" href=\"https:\/\/github.com\/Reiten966\/Polyformer\" aria-describedby=\"a11y-new-window-external-message\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca title=\"polyformer discord signup\" href=\"https:\/\/github.com\/sponsors\/Reiten966\/sponsorships?sponsor=Reiten966\u0026amp;tier_id=199363\u0026amp;preview=false\" aria-describedby=\"a11y-new-window-external-message\" target=\"_blank\"\u003eDiscord\u003c\/a\u003e\u003cspan\u003e and the \u003c\/span\u003e\u003ca title=\"Polyformer\" href=\"https:\/\/www.reiten.design\/polyformer\" aria-describedby=\"a11y-new-window-external-message\" target=\"_blank\"\u003eproject site\u003c\/a\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43464805679326,"sku":"8214450653","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/dfh_polyformer_fasteners_kit.png?v=1696740345"},{"product_id":"self-tapping-screws-socket-cap-stainless-steel","title":"Self Tapping Screws Socket Cap Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eSmall stainless M2 self-tapping screws for printed parts, electronics, and light-duty printer repairs.\u003c\/strong\u003e Each pack contains \u003cstrong\u003e100\u003c\/strong\u003e hex-socket socket-cap screws in the selected length: \u003cstrong\u003eM2x8\u003c\/strong\u003e, \u003cstrong\u003eM2x10\u003c\/strong\u003e, or \u003cstrong\u003eM2x12\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy use these instead of a standard machine screw?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-tapping point:\u003c\/strong\u003e forms its own thread in plastic, thin sheet, wood, and other light-duty materials where no threaded insert, nut, or tapped hole is available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSocket-cap head:\u003c\/strong\u003e gives a positive hex-key drive and a compact cylindrical head that is easier to service than tiny Phillips heads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel:\u003c\/strong\u003e better corrosion resistance than plain carbon steel for printer bays, electronics enclosures, and general shop hardware. Grade is not specified by the supplier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity:\u003c\/strong\u003e 100 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal size:\u003c\/strong\u003e M2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable lengths:\u003c\/strong\u003e M2x8, M2x10, M2x12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e hex-socket socket-cap head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint \/ thread style:\u003c\/strong\u003e pointed self-tapping screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e stainless steel, silver finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse these for small 3D-printer printed parts, probe mounts, electronics covers, light brackets, panels, and repairs where a small thread-forming screw is the right call. If you need drivers, check the \u003ca href=\"https:\/\/dfh.fm\/products\/ball-head-hex-keys\"\u003eBall Head Hex Keys\u003c\/a\u003e. For full build hardware bags instead of loose M2 tapping screws, see the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-v0-fasteners-kit\"\u003eVoron V0 Fasteners Kit\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/salad-fork-fastener-kit\"\u003eSalad Fork Fastener Kit\u003c\/a\u003e, or \u003ca href=\"https:\/\/dfh.fm\/products\/millennium-mills-milo-minimill-v1-5-fastener-kit\"\u003eMillennium Mills Milo v1.5 Fastener Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow to choose length\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eM2x8:\u003c\/strong\u003e thin printed walls, light covers, and shallow bosses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM2x10:\u003c\/strong\u003e the general-purpose choice when you need a little more bite.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM2x12:\u003c\/strong\u003e deeper bosses or stacked parts where the screw will not bottom out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThese are \u003cstrong\u003enot\u003c\/strong\u003e machine screws for nuts, heat-set inserts, or pre-tapped metal holes.\u003c\/li\u003e\n\u003cli\u003eThese are \u003cstrong\u003eself-tapping\u003c\/strong\u003e, not self-drilling; use an appropriate pilot hole in brittle plastics or harder material.\u003c\/li\u003e\n\u003cli\u003eDo not use as a structural or safety-critical fastener, and do not substitute for a project BOM where a machine screw is specified.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"M2x8","offer_id":43499521474782,"sku":"2201570900","price":8.25,"currency_code":"USD","in_stock":true},{"title":"m2x10","offer_id":43499521507550,"sku":"7362452688","price":8.5,"currency_code":"USD","in_stock":true},{"title":"m2x12","offer_id":43499521540318,"sku":"4915583192","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/ythg.jpg?v=1665182426"},{"product_id":"black-nickel-coated-threaded-heat-set-inserts","title":"Black Nickel Coated Threaded Heat Set Inserts","description":"\u003cp\u003eBrass heat-set threaded inserts with a deep black-nickel coating that won't fade with heat. You melt them into a printed part with a soldering iron; as the plastic re-solidifies it locks the knurled insert in place, giving you a strong, reusable metal thread instead of tapping into plastic.\u003c\/p\u003e\u003cp\u003eThe Voron spec is M3x5x4. Other sizes follow the dimensions used in popular machines and components, including the Milo Mill and XOL. The standard way to add durable, re-openable fasteners to any printed assembly. Sold in packs.\u003c\/p\u003e","brand":"Decent","offers":[{"title":"M2*4*3.5 \/ 50","offer_id":43580471607518,"sku":"7128186838","price":6.0,"currency_code":"USD","in_stock":true},{"title":"M2*4*3.5 \/ 100","offer_id":43580482748638,"sku":"9816458611","price":9.0,"currency_code":"USD","in_stock":true},{"title":"M2.5*4.6*4 \/ 50","offer_id":43580471640286,"sku":"2709472949","price":7.0,"currency_code":"USD","in_stock":true},{"title":"M2.5*4.6*4 \/ 100","offer_id":43580482781406,"sku":"5652040155","price":12.0,"currency_code":"USD","in_stock":true},{"title":"M3*5*4 \/ 50","offer_id":43580471673054,"sku":null,"price":8.5,"currency_code":"USD","in_stock":true},{"title":"M3*5*4 \/ 100","offer_id":43580482814174,"sku":"4081867281","price":10.0,"currency_code":"USD","in_stock":true},{"title":"M3*5*4 \/ 500","offer_id":43580482846942,"sku":"8283858226","price":44.99,"currency_code":"USD","in_stock":false},{"title":"M3*5*4 \/ 1000","offer_id":43580482879710,"sku":"8368071187","price":90.0,"currency_code":"USD","in_stock":false},{"title":"M3*4.6*3 \/ 50","offer_id":43580471705822,"sku":"7109535628","price":6.0,"currency_code":"USD","in_stock":true},{"title":"M3*4.6*3 \/ 100","offer_id":43580482912478,"sku":"5529588772","price":12.0,"currency_code":"USD","in_stock":true},{"title":"M3*4.6*5.7 \/ 50","offer_id":43580471738590,"sku":"5768215758","price":9.0,"currency_code":"USD","in_stock":true},{"title":"M3*4.6*5.7 \/ 100","offer_id":43580482945246,"sku":"6227131835","price":16.0,"currency_code":"USD","in_stock":true},{"title":"M5*7.1*5.8 \/ 50","offer_id":43580471771358,"sku":"3439555356","price":13.5,"currency_code":"USD","in_stock":true},{"title":"M5*7.1*5.8 \/ 100","offer_id":43580482978014,"sku":"7764399854","price":19.0,"currency_code":"USD","in_stock":true},{"title":"M5*7.1*9.5 \/ 50","offer_id":43580471804126,"sku":"2394123723","price":13.5,"currency_code":"USD","in_stock":true},{"title":"M5*7.1*9.5 \/ 100","offer_id":43580483010782,"sku":"1036498394","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_3315_da7a3435-f949-4c8a-ac56-b7ecc391fcc5.jpg?v=1666765032"},{"product_id":"fastener-kit-for-beltdrivenender3","title":"Fastener Kit for BeltDrivenEnder3 by kevinakasam","description":"\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eItem\u003c\/th\u003e\n            \u003cth\u003eRecommended\u003c\/th\u003e\n            \u003cth\u003eIncluded\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x40\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x30\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x8\u003c\/td\u003e\n            \u003ctd\u003e28\u003c\/td\u003e\n            \u003ctd\u003e34\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x25\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x20\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x12\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x10\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x8\u003c\/td\u003e\n            \u003ctd\u003e32\u003c\/td\u003e\n            \u003ctd\u003e39\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x6\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e13\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5 lock-nut\u003c\/td\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3 nuts\u003c\/td\u003e\n            \u003ctd\u003e14\u003c\/td\u003e\n            \u003ctd\u003e17\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3 washer\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5 T-nuts\u003c\/td\u003e\n            \u003ctd\u003e28\u003c\/td\u003e\n            \u003ctd\u003e34\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3 T-nuts\u003c\/td\u003e\n            \u003ctd\u003e24\u003c\/td\u003e\n            \u003ctd\u003e30\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"dfh.fm","offers":[{"title":"Stainless Steel","offer_id":44122573766878,"sku":"4364800416","price":19.99,"currency_code":"USD","in_stock":false},{"title":"Black Oxide Coated Steel","offer_id":44122573832414,"sku":"3853197619","price":19.99,"currency_code":"USD","in_stock":false},{"title":"Black Nickel Coated Stainless Steel","offer_id":44802404221150,"sku":"","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/yghfhg.jpg?v=1675523397"},{"product_id":"millennium-mills-milo-minimill-fastener-kit","title":"Millennium Mills Milo Minimill Fastener Kit","description":"\u003cp\u003eHigh qulity fastener kit, including \u003cstrong\u003e20% extra\u003c\/strong\u003e, per item. Nuts\/Bolts are stainless steel. Washers are alloy steel. Threaded heat inserts are black nickel coated brass. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eitem\u003c\/th\u003e\n            \u003cth\u003eincluded\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x30 BHCS\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x16 BHCS\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x12 BHCS\u003c\/td\u003e\n            \u003ctd\u003e158\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x10 BHCS\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x8 BHCS\u003c\/td\u003e\n            \u003ctd\u003e54\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM4x10 BHCS\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x100 SHCS\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x30 SHCS\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x25 SHCS\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x20 SHCS\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x20 SHCS\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x10 SHCS\u003c\/td\u003e\n            \u003ctd\u003e56\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x8 SHCS\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x5 SHCS\u003c\/td\u003e\n            \u003ctd\u003e34\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM2.5x8 SHCS\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x6 FHCS\u003c\/td\u003e\n            \u003ctd\u003e21\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3 Washer\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5 Washer\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5 Nyloc Hexnut\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x6 self tapping screw for plastics\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x10 Grub Screw\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5 Spring T-Nut\u003c\/td\u003e\n            \u003ctd\u003e108\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3 Spring T-Nut\u003c\/td\u003e\n            \u003ctd\u003e44\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eFan screws\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM5x7.1x9.5 Heated insert\u003c\/td\u003e\n            \u003ctd\u003e33\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM3x4.6x5.7 Heated insert\u003c\/td\u003e\n            \u003ctd\u003e40\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eM2.5 Heated insert\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eFan screws\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM5x7.1x9.5 Heated insert\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e40\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x4.6x5.7 Heated insert\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e48\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2.5 Heated insert\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43969632436446,"sku":"6740191084","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_3967.jpg?v=1675590899"},{"product_id":"2-piece-z-tensioners-for-voron-v2-by-masturmynd","title":"2-Piece Z Tensioners for Voron v2 by MasturMynd","description":"\u003cp\u003e\u003cstrong\u003eHardware pack for MasturMynd’s 2-Piece Z Tensioners:\u003c\/strong\u003e four M3x25 button-head cap screws and four short M3x5x4 heat-set inserts for building the stronger two-piece Z belt tensioner mod for Voron V2\/V2.4 printers.\u003c\/p\u003e\n\u003ch3\u003eWhy this mod exists\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMasturMynd’s design reorients the printed tensioner parts so belt tension loads run perpendicular to the layer lines instead of trying to split them apart.\u003c\/li\u003e\n\u003cli\u003eThe result is a more durable replacement for cracked stock Voron V2 Z tensioners when used with the printed parts from the official project files.\u003c\/li\u003e\n\u003cli\u003eThis pack covers the small hardware called out in the project BOM, so you are not stuck hunting four odd-length M3 screws and matching inserts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded hardware\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × M3x25 BHCS\u003c\/strong\u003e for clamping the two-piece tensioner assemblies together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × short M3 brass heat-set inserts, M3x5x4\u003c\/strong\u003e, one per tensioner assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and build notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for MasturMynd’s \u003ca href=\"https:\/\/github.com\/MasturMynd\/2-Piece_Z_Tensioners\" target=\"_blank\" rel=\"noopener\"\u003e2-Piece Z Tensioners\u003c\/a\u003e mod for Voron V2\/V2.4 printers.\u003c\/li\u003e\n\u003cli\u003eThe official assembly also uses the printed tensioner parts, a GT2 20T idler, and either the BOM M5x30 BHCS setup or a 5x28mm pin. If you need the idlers, pair it with the \u003ca href=\"https:\/\/dfh.fm\/products\/20t-idler-bore-5mm-width-6mm-by-runice\"\u003e20T Idler Bore 5mm Width 6mm by Runice\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor spare inserts or broader printed-part work, see our \u003ca href=\"https:\/\/dfh.fm\/products\/black-nickel-coated-threaded-heat-set-inserts\"\u003eBlack Nickel Coated Threaded Heat Set Inserts\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a full Z-drive kit and not the printed tensioner parts.\u003c\/li\u003e\n\u003cli\u003eDoes not include GT2 idlers, M5x30 screws, 5x28mm pins, or M3x16 belt-tensioning screws.\u003c\/li\u003e\n\u003cli\u003eNot intended for Voron V0, Trident, Switchwire, or non-V2 Z tensioner layouts unless you have separately verified compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44041671377118,"sku":"2490321821","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/preview.jpg?v=1678066802"},{"product_id":"annex-engineering-reinforced-gantry-mounts","title":"Annex Engineering Reinforced Gantry Mounts","description":"\u003cp\u003eFrom the \u003ca href=\"https:\/\/github.com\/Annex-Engineering\/Annex-Engineering_User_Mods\/tree\/main\/Printers\/Non_Annex_Printers\/VORON_Printers\/VORON_V2dot4\/annex_dev-Reinforced_Gantry_Mounts\" title=\"annex engineering reinforced gantry mounts GitHub\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/github.com\/Annex-Engineering\/Annex-Engineering_User_Mods\/tree\/main\/Printers\/Non_Annex_Printers\/VORON_Printers\/VORON_V2dot4\/annex_dev-Reinforced_Gantry_Mounts\" target=\"_blank\"\u003erepo\u003c\/a\u003e:\u003c\/p\u003e\n\u003cp\u003eThis new z joint has been developed for Redoubt but is backwards compatible with V2.2 and V2.4. The main advantage being that the gantry is now 13mm closer to the linear rails. Internal testing has shown that there is a noticeable improvement and less ringing for the Y axis. The ball head screw also allows the gantry to move smoothly in the printed part in comparison to the old design where layer lines rubbed each other. The pre-tensioning mechanism allows you to have zero play in the joint. The belt clips don’t have to come loose to swap the z joint and lastly due to its compact size full travel of the linear rails is possible. Compatible with a 0.6 nozzle and 0.3LH.\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eitem\u003c\/th\u003e\n\u003cth\u003erequired\u003c\/th\u003e\n\u003cth\u003eincluded\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e02152 ball head screws (stainless on both kits)\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM10x20 Grub Screw (flat end)\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x12 SHCS\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e17\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x16 SHCS\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x20 SHCS\u003c\/td\u003e\n\u003ctd\u003eoptional\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5x10x1 shim\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is enough for all 4 gantry corners plus extras. More info may be found in the \u003ca href=\"https:\/\/github.com\/Annex-Engineering\/Annex-Engineering_User_Mods\/tree\/main\/Printers\/Non_Annex_Printers\/VORON_Printers\/VORON_V2dot4\/annex_dev-Reinforced_Gantry_Mounts\" title=\"annex engineering reinforced gantry mounts GitHub\" data-mce-href=\"https:\/\/github.com\/Annex-Engineering\/Annex-Engineering_User_Mods\/tree\/main\/Printers\/Non_Annex_Printers\/VORON_Printers\/VORON_V2dot4\/annex_dev-Reinforced_Gantry_Mounts\" target=\"_blank\"\u003erepo\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Stainless Steel","offer_id":44105993748702,"sku":"5925152062","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Black Oxide Coated Stainless Steel","offer_id":44105993715934,"sku":"4642477320","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Black Nickel Coated Stainless Steel","offer_id":44802806022366,"sku":"","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/UnnamedDesign.jpg?v=1679988115"},{"product_id":"phaetus-rapido-titanium-screw-m1-6-11","title":"Phaetus Rapido Titanium Screw M1.6*11","description":"\u003cp\u003e\u003cstrong\u003eGenuine Phaetus Rapido titanium replacement screw\u003c\/strong\u003e for Rapido hotend service work, sized \u003cstrong\u003eM1.6x11\u003c\/strong\u003e and sold individually.\u003c\/p\u003e\n\u003ch3\u003eWhy this over a generic screw\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium hardware\u003c\/strong\u003e keeps heat transfer lower than ordinary steel in hotend assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrect small-format size:\u003c\/strong\u003e M1.6x11 for Rapido replacement use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBagged Phaetus spare\u003c\/strong\u003e with Rapido labeling, not loose mixed-bin hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: \u003cstrong\u003ePhaetus\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct: \u003cstrong\u003eRapido Titanium Screw\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: \u003cstrong\u003eM1.6x11\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: \u003cstrong\u003etitanium\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuantity: \u003cstrong\u003e1 screw\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and use\u003c\/h3\u003e\n\u003cp\u003eUse this when servicing a Phaetus Rapido-family hotend that needs the M1.6x11 titanium screw. It pairs with the live \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2\"\u003ePhaetus Rapido 2\u003c\/a\u003e lineup and Rapido hotend spare parts.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is \u003cstrong\u003eone replacement screw only\u003c\/strong\u003e, not a full hotend, heat block, sock, or screw kit.\u003c\/li\u003e\n\u003cli\u003eMatch the screw location and length on your hotend before installing; tiny hotend screws are easy to mix up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Important to get titanium.”\u003c\/blockquote\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44106609950942,"sku":"9034674945","price":2.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_43342.png?v=1696708919"},{"product_id":"spring-clip-for-30-series-extrusion","title":"Spring Clip for 30 Series Extrusion","description":"\u003cp\u003e\u003cstrong\u003eSingle M8 roll-in spring T-nut for 30-series slot-8 aluminum extrusion.\u003c\/strong\u003e The spring leaf holds the nut in the slot while you line up brackets, panels, and printer-frame hardware, so you are not chasing a loose nut down the rail during assembly.\u003c\/p\u003e\n\u003ch3\u003eWhy use this over a plain slide-in nut\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRoll-in\/drop-in style can be added at the mounting point instead of feeding from the end of the extrusion.\u003c\/li\u003e\n  \u003cli\u003eLeaf spring keeps the nut positioned in deeper T-slots while you start the screw.\u003c\/li\u003e\n  \u003cli\u003eM8 thread suits heavier 30-series and 40-series slot-8 profile hardware where an M3 or M5 T-nut is too small.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfile fit:\u003c\/strong\u003e 30-series \/ 3030 slot-8 aluminum extrusion; also commonly used on 4040 Bosch-style slot-8 profiles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot requirement:\u003c\/strong\u003e 8 mm T-slot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\/finish:\u003c\/strong\u003e nickel-plated steel style spring T-nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e sold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse for mounting brackets, plates, panels, feet, and accessories to 3030\/4040-style printer, CNC, and machine frames.\u003c\/li\u003e\n  \u003cli\u003eNot for 20-series \/ 2020 extrusion with 6 mm slots; use \u003ca href=\"https:\/\/dfh.fm\/products\/hammerhead-t-nuts-for-20-series-aluminium-extrusion\"\u003eHammerhead T-Nuts for 20 Series Aluminium Extrusion\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/roll-in-spring-nuts\"\u003eRoll-In Spring Nuts\u003c\/a\u003e where those thread\/slot sizes match your frame.\u003c\/li\u003e\n  \u003cli\u003eNot for 15 mm MakerBeamXL\/OpenBeam profiles; use the \u003ca href=\"https:\/\/dfh.fm\/products\/makerbeam-xl-t-nut\"\u003eMakerBeam XL T-Nut\u003c\/a\u003e for that system.\u003c\/li\u003e\n  \u003cli\u003eSome 40-series extrusion uses a 10 mm slot instead of slot-8; check your profile before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44243195592926,"sku":"9168189843","price":0.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/3_SERIES_SPIRING_CLIPS.jpg?v=1687609820"},{"product_id":"n42-6x3mm-round-black-nickel-coated-neodymium-magnets","title":"N42 6x3mm Round Black Nickel Coated Neodymium Magnets","description":"\u003cp\u003e\u003cstrong\u003eN42 6 × 3 mm black-nickel neodymium disc magnets for Voron-style probes, panels, and compact magnetic mounts.\u003c\/strong\u003e These are small round NdFeB magnets with a near-black conductive nickel finish, sold individually so you can buy the exact count your build needs.\u003c\/p\u003e\n\u003ch3\u003eWhy this magnet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm diameter × 3 mm thick\u003c\/strong\u003e is the common round magnet size used across Voron and 3D-printer mods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN42 neodymium\u003c\/strong\u003e gives strong holding force in a tiny disc without stepping up to the more brittle, higher-pull N52 option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack nickel coating\u003c\/strong\u003e gives a cleaner dark finish while keeping the magnet electrically conductive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold per magnet\u003c\/strong\u003e, not as a fixed kit or bulk pack, so spares and odd-count BOMs are easy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet type:\u003c\/strong\u003e round neodymium \/ NdFeB disc magnet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e N42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 mm diameter × 3 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black nickel coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e flat round disc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e price is per 1 magnet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse these anywhere a build calls for a 6 × 3 mm round neodymium magnet: Voron TAP\/Klicky-style probe assemblies, magnetic panels, printer mods, printed jigs, latches, closures, and small fixtures.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThese are \u003cstrong\u003enot\u003c\/strong\u003e rubber-coated or plastic-coated magnets; the coating is thin black nickel.\u003c\/li\u003e\n\u003cli\u003eNeodymium magnets are brittle. Press-fit carefully and avoid letting loose magnets snap together.\u003c\/li\u003e\n\u003cli\u003eCheck your BOM before ordering: this listing is \u003cstrong\u003eN42\u003c\/strong\u003e. If your design specifically calls for N52, use an N52 magnet instead.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44244551696606,"sku":"1931638656","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/s_299e01b4-a040-4729-ab3c-33aa62cda443.png?v=1687692381"},{"product_id":"millennium-mills-milo-minimill-v1-5-fastener-kit","title":"Millennium Mills Milo v1.5 Fastener Kit — Stainless \/ Black-Nickel","description":"\u003cp\u003e\u003cstrong\u003eThe entire Milo v1.5 fastener list, sorted in one box — in stainless, not the plain steel everyone else ships.\u003c\/strong\u003e Every screw, nut, washer, T-nut and heat-set insert the Millennium Mills \/ Millennium Machines Milo v1.5 calls for, counted to the BOM with \u003cstrong\u003e~20% extra on every line\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy this kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel\u003c\/strong\u003e (or \u003cstrong\u003eblack-nickel-coated stainless\u003c\/strong\u003e) — not the zinc \/ black-oxide hardware most kits use. A mill throws chips and cutting fluid; stainless heads and threads don't flash-rust and stain your printed parts. The Black option gives an all-black build that still won't corrode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+20% extra on every size.\u003c\/strong\u003e Strip a head or drop an M3 grub in the chip tray and you keep building instead of waiting two weeks on an order. On a ~900-piece build, one short screw is the difference between finishing tonight and not.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-set inserts included\u003c\/strong\u003e (M5 \/ M3 \/ M2.5, black-nickel brass) — the parts people forget to order and hate sourcing in the exact sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete and sorted to the v1.5 BOM.\u003c\/strong\u003e Self-sourcing is a dozen McMaster line items and weeks of staggered shipments. This is a build, not a scavenger hunt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose \u003cstrong\u003eSilver (stainless)\u003c\/strong\u003e or \u003cstrong\u003eBlack (nickel-coated stainless)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eitem\u003c\/th\u003e\n            \u003cth\u003eincluded\u003c\/th\u003e\n            \u003cth\u003erecommended\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x30 BHCS\u003c\/th\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x16 BHCS\u003c\/th\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x12 BHCS\u003c\/th\u003e\n            \u003ctd\u003e190\u003c\/td\u003e\n            \u003ctd\u003e158\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x10 BHCS\u003c\/th\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x8 BHCS\u003c\/th\u003e\n            \u003ctd\u003e65\u003c\/td\u003e\n            \u003ctd\u003e54\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM4x10 BHCS\u003c\/th\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x100 SHCS\u003c\/th\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x30 SHCS\u003c\/th\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x25 SHCS\u003c\/th\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x20 SHCS\u003c\/th\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3x20 SHCS\u003c\/th\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3x10 SHCS\u003c\/th\u003e\n            \u003ctd\u003e68\u003c\/td\u003e\n            \u003ctd\u003e56\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3x8 SHCS\u003c\/th\u003e\n            \u003ctd\u003e18\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3x5 SHCS\u003c\/th\u003e\n            \u003ctd\u003e41\u003c\/td\u003e\n            \u003ctd\u003e34\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM2.5x8 SHCS\u003c\/th\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3x6 FHCS\u003c\/th\u003e\n            \u003ctd\u003e26\u003c\/td\u003e\n            \u003ctd\u003e21\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3 Washer\u003c\/th\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5 Washer\u003c\/th\u003e\n            \u003ctd\u003e18\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5 Nyloc Hexnut\u003c\/th\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3x6 self tapping screw for plastics\u003c\/th\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3x10 Grub Screw\u003c\/th\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5 Spring T-Nut\u003c\/th\u003e\n            \u003ctd\u003e130\u003c\/td\u003e\n            \u003ctd\u003e108\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3 Spring T-Nut\u003c\/th\u003e\n            \u003ctd\u003e53\u003c\/td\u003e\n            \u003ctd\u003e44\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eFan screws\u003c\/th\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM5x7.1x9.5 Heated insert\u003c\/th\u003e\n            \u003ctd\u003e40\u003c\/td\u003e\n            \u003ctd\u003e33\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM3x4x5 Heated insert\u003c\/th\u003e\n            \u003ctd\u003e48\u003c\/td\u003e\n            \u003ctd\u003e40\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003cth\u003eM2.5 Heated insert\u003c\/th\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e“Included” is what ships (with the ~20% overage); “Recommended” is the bare Milo v1.5 BOM count.\u003c\/em\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Silver (stainless)","offer_id":44277649113310,"sku":"6740191084","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Black (nickel coated stainless)","offer_id":44277649146078,"sku":"6740191085","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_4958.jpg?v=1689924556"},{"product_id":"titanium-fastner-kit-for-ultralight-x-beams","title":"Titanium Fastener Kit for Ultralight X-Beams","description":"\u003cp\u003eWhen grams count, you need dfh.fm's exclusive \u003cstrong\u003eall Titanium\u003c\/strong\u003e fastener kit for \u003ca href=\"https:\/\/dfh.fm\/collections\/front-page-new\/products\/ultralight-x-beam-with-cnc-xy-joints-and-full-titanium-hardware?variant=44298657366238\" target=\"_blank\"\u003eUltralight X-Beam With CNC XY Joints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM5 reamer bolts * 4\u003c\/li\u003e\n\u003cli\u003eM5x16 SHCS * 4\u003c\/li\u003e\n\u003cli\u003eM5x8 BHCS * 8\u003c\/li\u003e\n\u003cli\u003eM3x4 SHCS *8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csmall\u003eThis kit is included with your \u003ca href=\"https:\/\/dfh.fm\/collections\/front-page-new\/products\/ultralight-x-beam-with-cnc-xy-joints-and-full-titanium-hardware?variant=44298657366238\" target=\"_blank\"\u003eUltralight X-Beam With CNC XY Joints\u003c\/a\u003e purchase.\u003c\/small\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44300456591582,"sku":"4371821239","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/CEF10DAE-4525-4992-859F-342EB54DF723_1_102_a.jpg?v=1691447354"},{"product_id":"m4-0-70-zinc-plated-steel-semi-flanged-knurled-head-thumb-nut","title":"M4-0.70 Zinc Plated Steel Semi-Flanged Knurled-Head Thumb Nut","description":"\u003cp\u003e\u003cstrong\u003eM4 × 0.70 zinc-plated steel knurled thumb nut\u003c\/strong\u003e for tool-free adjustments on printer panels, brackets, jigs, and other hardware where a standard hex nut is awkward to reach.\u003c\/p\u003e\n\u003ch3\u003eWhy use a knurled thumb nut\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRaised knurled head gives finger grip for repeat adjustments without a wrench.\u003c\/li\u003e\n\u003cli\u003eSemi-flanged collar spreads load better than a plain round thumb nut and helps cover oversized or irregular holes.\u003c\/li\u003e\n\u003cli\u003eZinc-plated steel is a practical dry-environment choice when you want a tougher metal nut without paying stainless prices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThread: \u003cstrong\u003eM4 × 0.70 mm\u003c\/strong\u003e metric coarse\u003c\/li\u003e\n\u003cli\u003eHead diameter: \u003cstrong\u003e12 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: \u003cstrong\u003ezinc-plated steel\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStyle: semi-flanged knurled-head thumb nut, internally threaded\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse it for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHand-tightened printer enclosure panels, brackets, spool holders, stops, and service-access hardware.\u003c\/li\u003e\n\u003cli\u003eFixtures or printed parts that need repeated removal without loose tools.\u003c\/li\u003e\n\u003cli\u003eSame fastener family as the live \u003ca href=\"https:\/\/dfh.fm\/products\/m3-0-5-black-zinc-plated-steel-semi-flanged-knurled-head-thumb-nut\"\u003eM3 black zinc-plated thumb nut\u003c\/a\u003e and \u003ca href=\"https:\/\/dfh.fm\/products\/m3-0-5-a2-18-8-stainless-steel-semi-flanged-knurled-head-thumb-nut\"\u003eM3 stainless thumb nut\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a lock nut; add threadlocker or a locking fastener if vibration resistance is required.\u003c\/li\u003e\n\u003cli\u003eNot stainless steel; choose stainless for wet, corrosive, or cosmetic applications.\u003c\/li\u003e\n\u003cli\u003eNot a screw or bolt — this is the mating nut for an M4 × 0.70 threaded fastener.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44399652634846,"sku":null,"price":1.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_52793.png?v=1697008066"},{"product_id":"m3-0-5-black-zinc-plated-steel-semi-flanged-knurled-head-thumb-nut","title":"M3-0.5 Black Zinc Plated Steel Semi-Flanged Knurled-Head Thumb Nut","description":"\u003cp\u003e\u003cstrong\u003eTool-free M3 fastening in a compact black zinc finish.\u003c\/strong\u003e This semi-flanged knurled-head thumb nut fits \u003cstrong\u003eM3 x 0.50 mm\u003c\/strong\u003e metric threads and has an \u003cstrong\u003e8 mm head diameter\u003c\/strong\u003e for hand-tightened printer hardware, panels, brackets, and adjustment points.\u003c\/p\u003e\n\u003ch3\u003eWhy use this over a standard hex nut?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnurled head:\u003c\/strong\u003e easier to grip by hand than a small M3 hex nut, especially in tight printer frames.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-flanged shoulder:\u003c\/strong\u003e spreads pressure over more surface area and helps cover slightly oversized or irregular holes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack zinc-plated steel:\u003c\/strong\u003e blends with black printer hardware while adding general-purpose corrosion resistance for indoor builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M3 x 0.50 mm, right-hand metric coarse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead diameter:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e semi-flanged knurled-head thumb nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ finish:\u003c\/strong\u003e steel, black zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e hand-tightened; no hex key or wrench required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinter use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUseful for removable panels, covers, jigs, brackets, and other M3 hardware points that need frequent hand adjustment.\u003c\/li\u003e\n\u003cli\u003eFor a similar M3 nut in stainless, see the \u003ca href=\"https:\/\/dfh.fm\/products\/m3-0-5-a2-18-8-stainless-steel-semi-flanged-knurled-head-thumb-nut\"\u003eM3-0.5 A2 \/ 18-8 stainless semi-flanged thumb nut\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor larger M4 hardware, see the \u003ca href=\"https:\/\/dfh.fm\/products\/m4-0-70-zinc-plated-steel-semi-flanged-knurled-head-thumb-nut\"\u003eM4-0.70 zinc-plated semi-flanged thumb nut\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a thumb nut, not a wing nut or a threaded knob.\u003c\/li\u003e\n\u003cli\u003eMatch it with M3 x 0.50 screws only; it will not fit M4 or imperial threads.\u003c\/li\u003e\n\u003cli\u003eBlack zinc is a general indoor hardware finish, not a stainless substitute for wet or chemical exposure.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44399664234718,"sku":null,"price":1.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_5279.png?v=1697008257"},{"product_id":"m3-0-5-a2-18-8-stainless-steel-semi-flanged-knurled-head-thumb-nut","title":"M3-0.5 A2 \/ 18-8 Stainless Steel Semi-Flanged Knurled-Head Thumb Nut","description":"\u003cp\u003e\u003cstrong\u003eM3 × 0.5 stainless thumb nut for hand-adjusted printer hardware.\u003c\/strong\u003e A compact semi-flanged knurled-head nut with an \u003cstrong\u003e8 mm head diameter\u003c\/strong\u003e, made from A2 \/ 18-8 stainless steel for corrosion-resistant, tool-free adjustment.\u003c\/p\u003e\n\u003ch3\u003eWhy use this over a hex nut?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool-free grip:\u003c\/strong\u003e the knurled outer head is made to turn by hand, useful for covers, brackets, tensioners, fixtures, and parts that come on and off often.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmall footprint:\u003c\/strong\u003e thumb nuts fit tighter spaces than wing nuts while still giving more finger purchase than a standard M3 hex nut.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSemi-flanged face:\u003c\/strong\u003e the raised shoulder\/flange gives a broader bearing surface than the knurled body alone.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA2 \/ 18-8 stainless:\u003c\/strong\u003e suitable for damp shop environments and printer enclosures where plain steel hardware can rust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: \u003cstrong\u003eM3 × 0.5 mm\u003c\/strong\u003e, right-hand internal thread\u003c\/li\u003e\n  \u003cli\u003eHead style: knurled thumb nut with semi-flanged\/shouldered face\u003c\/li\u003e\n  \u003cli\u003eHead diameter: \u003cstrong\u003e8 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaterial: \u003cstrong\u003eA2 \/ 18-8 stainless steel\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eSold as: single thumb nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse anywhere a 3D-printer mod, fixture, cover, or small assembly needs an M3 nut that can be loosened and tightened by hand instead of with a wrench.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a \u003cstrong\u003enut\u003c\/strong\u003e, not a screw or bolt; pair it with an M3 screw, stud, or threaded rod.\u003c\/li\u003e\n  \u003cli\u003eIt is stainless, not black oxide and not brass.\u003c\/li\u003e\n  \u003cli\u003eIt is not a locking nut; use threadlocker or a locknut where vibration resistance is required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44399693398238,"sku":null,"price":1.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_52792_934b8d9c-f34e-4dee-aca7-3cc01e7f07be.png?v=1697008469"},{"product_id":"m4-nickel-plated-slot-head-binding-barrels-and-screws","title":"M4 Nickel Plated Slot Head Binding Barrels and Screws","description":"\u003cp\u003e\u003cstrong\u003eM4 nickel-plated binding barrels and screws for removable clamping joints.\u003c\/strong\u003e Each set pairs an internally threaded barrel\/post with a matching M4 screw; choose 20 mm, 25 mm, or 30 mm barrel length.\u003c\/p\u003e\n\u003ch3\u003eWhy use binding barrels here\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable two-piece fastener:\u003c\/strong\u003e the barrel and screw clamp material from both sides, so panels, plates, folders, leather, fixtures, and printer mods can be opened again later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM4 internal thread:\u003c\/strong\u003e the screw and barrel are M4-threaded even though the outside of the barrel may be listed elsewhere by its roughly 5 mm outer diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNickel-plated finish:\u003c\/strong\u003e silver-tone plating gives a clean, corrosion-resistant surface for visible hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted head:\u003c\/strong\u003e installs with a flat-blade screwdriver; no hex key required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M4 internal barrel thread with matching M4 screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarrel lengths:\u003c\/strong\u003e 20 mm, 25 mm, or 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e nickel plated, silver tone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener style:\u003c\/strong\u003e binding barrel \/ binding post \/ Chicago screw \/ sex bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e slotted head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUseful anywhere you need a clean removable post-and-screw joint: bookbinding, leather and strap work, panels, brackets, fixtures, and 3D-printer projects that call for a binding screw or sex bolt. For Voron-style endstop work, compare the length and outside barrel diameter against the original BOM before ordering.\u003c\/p\u003e\n\u003ch3\u003ePick the right length\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm:\u003c\/strong\u003e shortest stocked barrel, best when the clamped stack is thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm:\u003c\/strong\u003e mid-length option when 20 mm is too short.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 mm:\u003c\/strong\u003e longest stocked option for thicker stacks or spacer-style use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a standard socket-head cap screw or machine screw by itself; it is a two-piece binding post set.\u003c\/li\u003e\n\u003cli\u003eNot guaranteed to fit every “M5 sexbolt” BOM callout unless the BOM is referring to the barrel outside diameter and the required length matches.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"20mm","offer_id":44399925199070,"sku":null,"price":0.99,"currency_code":"USD","in_stock":true},{"title":"25mm","offer_id":44399925264606,"sku":null,"price":1.09,"currency_code":"USD","in_stock":false},{"title":"30mm","offer_id":44399925297374,"sku":null,"price":1.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/sdggdf.png?v=1697010378"},{"product_id":"voron-bfci-kit-by-clee-ultra-lightweight-aluminum-edition","title":"Voron BFCI (Beefy Front Idlers) Kit - by clee Ultra-Lightweight Aluminum Edition","description":"\u003cp dir=\"auto\"\u003eThese are replacement idlers for Voron, and Voron-based machines, designed with one core principle: \u003cstrong\u003euse belt tension to \u003cem\u003ecompress\u003c\/em\u003e printed layers instead of splitting or pulling them apart.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThis design is available for Voron Trident, Voron 2.4, Salad Fork, and Micron.\u003c\/p\u003e\n\u003cp\u003eWhen grams count, \u003cstrong\u003ethis is the kit you need.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUltra lightweight aluminum pins help shave off a few extra grams from your gantry.\u003c\/p\u003e\n\u003cp\u003eThe Includes parts for Voron \u003cstrong\u003eTrident\u003c\/strong\u003e, Voron \u003cstrong\u003e2.4\u003c\/strong\u003e, \u003cstrong\u003eSalad Fork\u003c\/strong\u003e, and \u003cstrong\u003eMicron\u003c\/strong\u003e. One kit will make two idlers and includes spares\u003c\/p\u003e\n\u003cp\u003eIncluded in the kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM5x18 Ultra Lightweight Aluminum Pins * 3\u003c\/li\u003e\n\u003cli\u003eBlack Niickel Coated Threaded Inserts 3x4x5 * 5\u003c\/li\u003e\n\u003cli\u003eM3 T-nuts * 3\u003c\/li\u003e\n\u003cli\u003eM3x16 BHCS * 3\u003c\/li\u003e\n\u003cli\u003eM3x20 BHCS * 5\u003c\/li\u003e\n\u003cli\u003eM3x25 BHCS * 6\u003c\/li\u003e\n\u003cli\u003eM5x30 BHCS * 5\u003c\/li\u003e\n\u003cli\u003eM3x12 SHCS * 3\u003c\/li\u003e\n\u003cli\u003eM5x40 SHCS * 5\u003c\/li\u003e\n\u003cli\u003eM5 Hex-Nuts * 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore information may be found in the \u003ca href=\"https:\/\/github.com\/clee\/VoronBFI\" title=\"Voron BFCI King by Clee - GitHub repo\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/clee\/VoronBFI\"\u003erepo\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Black Nickel Coated Stainless Steel","offer_id":44812263719134,"sku":"","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/ready_Untitled26_594b2e0e-da78-4b81-92aa-74c7d99a45ec.png?v=1698633035"},{"product_id":"loctite-290-threadlocker-medium-strength-high-temp-6-ml-tube","title":"Loctite 290 Threadlocker: Medium-Strength, High-Temp - 6 ml Tube","description":"\u003cp\u003eA threadlocker with a thin, low-viscosity formulation, adept at penetrating narrow gaps and fissures, thus perfectly suitable for securing preassembled fasteners.\u003c\/p\u003e\n\u003cp\u003eThis product, LOCTITE® 290, presents as a green adhesive with medium to high strength, specifically developed for locking and sealing threaded fasteners. Its low viscosity allows it to seep into engaged threads through capillary action, obviating the necessity for dismantling before application. This characteristic also renders it effective for sealing pores in welded joints, castings, and components made from powdered metal. The product is an anaerobic adhesive that hardens when confined in air-free environments between tightly fitting metal surfaces, thereby safeguarding against loosening and leakage caused by shocks and vibrations.\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003ePrevents fastener loosening on vibrating assemblies, e.g., pumps, gear boxes, or presses.\u003c\/li\u003e\n    \u003cli\u003eIdeal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors, and set screws.\u003c\/li\u003e\n    \u003cli\u003eSeals porosities in welds, castings, and powdered metal parts.\u003c\/li\u003e\n    \u003cli\u003eRequires heat for disassembly.\u003c\/li\u003e\n    \u003cli\u003eMeets Mil-S-46163A Type III Grade R.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication method\u003c\/td\u003e\n\u003ctd\u003ePost Applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e-55.0 - 150.0 °C (-65.0 - 300.0 °F )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eFor Pre-Assembled Fasteners, Porosity Sealing, Threadlocking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque, M10 Steel Nuts\/Bolts\u003c\/td\u003e\n\u003ctd\u003e10.0 N·m (90.0 in.\/lb. )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure type\u003c\/td\u003e\n\u003ctd\u003eAnaerobic Cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e20.0 min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey characteristics\u003c\/td\u003e\n\u003ctd\u003eDisassembly: Disassembly with Heat, Fluorescent, Strength: Medium to High Strength, Viscosity: Low Viscosity, Wicking\/Penetrating Grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical form\u003c\/td\u003e\n\u003ctd\u003eLiquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevail torque, M10 Steel Nuts\/Bolts\u003c\/td\u003e\n\u003ctd\u003e29.0 N·m (260.0 in.\/lb. )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended for use with\u003c\/td\u003e\n\u003ctd\u003eMetal: Brass, Metal: Steel, Metal: Steel - Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity, Speed 20 RPM\u003c\/td\u003e\n\u003ctd\u003e40.0 mPa·s (cP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Henkel North America","offers":[{"title":"Default Title","offer_id":44640578961630,"sku":"7239823310","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/51Pr2OauEcL._AC_SL1200.png?v=1704446381"},{"product_id":"loctite-242-threadlocker-medium-strength-high-temp-6-ml-tube","title":"Loctite 242 Threadlocker: Medium-Strength, High-Temp - 6 ml Tube","description":"\u003cp\u003eA medium strength, medium viscosity thixotropic threadlocking adhesive for metal thread sizes up to M36.\u003c\/p\u003e\n\u003cp\u003eLOCTITE® 242 is a medium strength, medium viscosity, anaerobic-curing threadlocking adhesive offering general purpose qualities. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMedium strength\u003c\/li\u003e\n\u003cli\u003eMedium viscosity\u003c\/li\u003e\n\u003cli\u003eQuick fixture time\u003c\/li\u003e\n\u003cli\u003eThixotropic to reduce adhesive migration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ccaption\u003eTechnical Information\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical basis \/ base\u003c\/td\u003e\n\u003ctd\u003eMethacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e5.0 - 20.0 min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey characteristics\u003c\/td\u003e\n\u003ctd\u003eThixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended for use with\u003c\/td\u003e\n\u003ctd\u003eMetal: Brass, Metal: Steel, Metal: Steel - Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity, Brookfield - RVF, @ 25.0 °C Spindle 3, speed 20 rpm, Helipath\u003c\/td\u003e\n\u003ctd\u003e800.0 - 1600.0 mPa·s (cP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Henkel North America","offers":[{"title":"Default Title","offer_id":44640578994398,"sku":"1265736893","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/Image_d792d8e6-5420-4712-9853-af725c859bdc.png?v=1704445979"},{"product_id":"loctite-242-threadlocker-medium-strength-glue-6-ml-tube","title":"Loctite 242 Threadlocker: Medium-Strength Glue - 6 ml Tube","description":"\u003cp\u003eA threadlocker with a thin, low-viscosity formulation, adept at penetrating narrow gaps and fissures, thus perfectly suitable for securing preassembled fasteners.\u003c\/p\u003e\n\u003cp\u003eThis product, LOCTITE® 290, presents as a green adhesive with medium to high strength, specifically developed for locking and sealing threaded fasteners. Its low viscosity allows it to seep into engaged threads through capillary action, obviating the necessity for dismantling before application. This characteristic also renders it effective for sealing pores in welded joints, castings, and components made from powdered metal. The product is an anaerobic adhesive that hardens when confined in air-free environments between tightly fitting metal surfaces, thereby safeguarding against loosening and leakage caused by shocks and vibrations.\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003ePrevents fastener loosening on vibrating assemblies, e.g., pumps, gear boxes, or presses.\u003c\/li\u003e\n    \u003cli\u003eIdeal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors, and set screws.\u003c\/li\u003e\n    \u003cli\u003eSeals porosities in welds, castings, and powdered metal parts.\u003c\/li\u003e\n    \u003cli\u003eRequires heat for disassembly.\u003c\/li\u003e\n    \u003cli\u003eMeets Mil-S-46163A Type III Grade R.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication method\u003c\/td\u003e\n\u003ctd\u003ePost Applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e-55.0 - 150.0 °C (-65.0 - 300.0 °F )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eFor Pre-Assembled Fasteners, Porosity Sealing, Threadlocking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque, M10 Steel Nuts\/Bolts\u003c\/td\u003e\n\u003ctd\u003e10.0 N·m (90.0 in.\/lb. )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure type\u003c\/td\u003e\n\u003ctd\u003eAnaerobic Cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e20.0 min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey characteristics\u003c\/td\u003e\n\u003ctd\u003eDisassembly: Disassembly with Heat, Fluorescent, Strength: Medium to High Strength, Viscosity: Low Viscosity, Wicking\/Penetrating Grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical form\u003c\/td\u003e\n\u003ctd\u003eLiquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevail torque, M10 Steel Nuts\/Bolts\u003c\/td\u003e\n\u003ctd\u003e29.0 N·m (260.0 in.\/lb. )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended for use with\u003c\/td\u003e\n\u003ctd\u003eMetal: Brass, Metal: Steel, Metal: Steel - Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity, Speed 20 RPM\u003c\/td\u003e\n\u003ctd\u003e40.0 mPa·s (cP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Henkel North America","offers":[{"title":"Default Title","offer_id":44640582467806,"sku":"5085892852","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/710dYyD5mTL._SL1500.png?v=1704445817"},{"product_id":"archetype-belt-clip-tube","title":"Archetype Belt Clip Tube","description":"\u003cp\u003e\u003cstrong\u003eReplacement belt clip tube for the Armchair Heavy Industries Archetype toolhead core.\u003c\/strong\u003e This is the small \u003cstrong\u003e4mm OD\u003c\/strong\u003e stainless tube that sits through the belt loop in the Archetype belt clip.\u003c\/p\u003e\n\u003ch3\u003eWhy this tube matters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatches the Archetype core belt-clip install callout for \u003cstrong\u003e4mm OD belt tubes\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCut to the stocked Archetype belt-clip length: \u003cstrong\u003e22.5mm\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e304 stainless steel\u003c\/strong\u003e tube with approximately \u003cstrong\u003e0.45mm wall thickness\u003c\/strong\u003e for a smooth, durable belt-loop bearing surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProject fit: \u003cstrong\u003eArmchair Heavy Industries Archetype\u003c\/strong\u003e toolhead core belt clips\u003c\/li\u003e\n\u003cli\u003eMaterial: \u003cstrong\u003e304 stainless steel\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOuter diameter: \u003cstrong\u003e4mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWall thickness: \u003cstrong\u003e0.45mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLength: \u003cstrong\u003e22.5mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuantity: \u003cstrong\u003e1 tube\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and use\u003c\/h3\u003e\n\u003cp\u003eUse this when building or refreshing the Archetype carriage belt clips. During installation, the belt folds back through the clip and the tube slides through the loop and the center of the clip to hold the belt path.\u003c\/p\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not include printed belt clips, belts, or M3x45 belt pins\/screws.\u003c\/li\u003e\n\u003cli\u003eNot a generic PTFE or filament guide tube; this is belt-clip hardware for the Archetype core.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":44777517416670,"sku":"8963316729","price":1.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_6288.jpg?v=1707675080"},{"product_id":"grid-box-17-4cm-9-8cm-2-2cm","title":"Grid Box 17.4cm * 9.8cm * 2.2cm","description":"\u003cp\u003e\u003cstrong\u003eCompact 15-compartment organizer for terminals, screws, nozzles, and other small bench parts.\u003c\/strong\u003e This clear plastic grid box measures \u003cstrong\u003e17.4 cm × 9.8 cm × 2.2 cm\u003c\/strong\u003e and uses removable divider walls so you can combine cells when a part needs more room.\u003c\/p\u003e\n\u003ch3\u003eWhy this box works on a printer bench\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e15 small compartments\u003c\/strong\u003e sized around \u003cstrong\u003e3.3 cm × 3.0 cm\u003c\/strong\u003e for connector housings, crimps, fasteners, beads, washers, nozzles, and labels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear lid and body\u003c\/strong\u003e make it easy to see what is inside without opening every tray.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable internal dividers\u003c\/strong\u003e let you make wider horizontal compartments for longer parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow 2.2 cm profile\u003c\/strong\u003e stacks cleanly in a drawer or project bin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood fit for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSorting terminals and housings from the \u003ca href=\"https:\/\/dfh.fm\/products\/jst-xh-2-54-230pc-kit\"\u003eJST-XH 2.54 230pc Kit\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eKeeping spare screws, heat-set inserts, ferrules, crimps, nozzles, and small electronics parts separated during a Voron, ERCF, or general 3D-printer build.\u003c\/li\u003e\n  \u003cli\u003eTraveling with a small repair kit without dumping tiny parts into one bag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOutside size: \u003cstrong\u003e17.4 cm L × 9.8 cm W × 2.2 cm H\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eLayout: \u003cstrong\u003e15 compartments\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eApproximate cell size shown by supplier image: \u003cstrong\u003e3.3 cm × 3.0 cm\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaterial\/finish: translucent clear plastic with blue latch\u003c\/li\u003e\n  \u003cli\u003eConfiguration: removable divider walls; fixed outer shell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a small-parts organizer, not a sealed waterproof case.\u003c\/li\u003e\n  \u003cli\u003eBest for loose bench hardware and components; very tall connectors or bulky tools need the \u003ca href=\"https:\/\/dfh.fm\/products\/grid-box-27-5cm-17-5cm-4-2cm\"\u003elarger 27.5 cm grid box\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Exactly what I needed… I like the removable walls that let you make the compartments bigger.”\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44800100171998,"sku":"4802779778","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/2251697022458_.pic.jpg?v=1708507759"},{"product_id":"grid-box-27-5cm-17-5cm-4-2cm","title":"Grid Box 27.5cm * 17.5cm * 4.2cm","description":"\u003cp\u003e\u003cstrong\u003eLarge 36-compartment organizer for fasteners, terminals, nozzles, and other bench parts.\u003c\/strong\u003e This clear plastic grid box measures \u003cstrong\u003e27.5 cm × 17.5 cm × 4.2 cm\u003c\/strong\u003e and uses removable divider walls so you can keep tiny parts separated or open up wider cells when a part needs more room.\u003c\/p\u003e\n\u003ch3\u003eWhy this box works on a printer bench\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e36 compartments\u003c\/strong\u003e give you enough separation for screw sizes, heat-set inserts, crimps, ferrules, jumpers, nozzles, beads, and labels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear lid and body\u003c\/strong\u003e make it easy to see what is inside without opening every tray.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable internal dividers\u003c\/strong\u003e let you combine adjacent cells for longer connectors or mixed repair-kit parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow 4.2 cm profile\u003c\/strong\u003e stacks cleanly in a drawer, project bin, or on a workbench shelf.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood fit for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSorting terminals and housings from the \u003ca href=\"https:\/\/dfh.fm\/products\/jst-xh-2-54-230pc-kit\"\u003eJST-XH 2.54 230pc Kit\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eKeeping spare screws, heat-set inserts, ferrules, crimps, nozzles, and small electronics parts separated during a Voron, ERCF, or general 3D-printer build.\u003c\/li\u003e\n  \u003cli\u003eBuilding a larger bench organizer when the \u003ca href=\"https:\/\/dfh.fm\/products\/grid-box-17-4cm-9-8cm-2-2cm\"\u003e15-compartment grid box\u003c\/a\u003e is too small.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOutside size: \u003cstrong\u003e27.5 cm L × 17.5 cm W × 4.2 cm H\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eLayout: \u003cstrong\u003e36 removable compartments\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaterial\/finish: translucent clear plastic with snap latches\u003c\/li\u003e\n  \u003cli\u003eConfiguration: removable divider walls; fixed outer shell\u003c\/li\u003e\n  \u003cli\u003eWeight on store record: \u003cstrong\u003e200 g\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a small-parts organizer, not a sealed waterproof case.\u003c\/li\u003e\n  \u003cli\u003eIt ships empty; the photo shows the organizer only, not a kit of parts.\u003c\/li\u003e\n  \u003cli\u003eFor a pocket-size connector or travel box, use the \u003ca href=\"https:\/\/dfh.fm\/products\/grid-box-17-4cm-9-8cm-2-2cm\"\u003esmaller 17.4 cm grid box\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44800102301918,"sku":"7800093470","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/2241697022457_.pic.jpg?v=1708507894"},{"product_id":"lh-stinger-fastener-kit","title":"LH Stinger Fastener Kit","description":"\u003cp\u003e\u003ca rel=\"noopener\" title=\"LH Stionger Collection at dfh.fm\" href=\"https:\/\/dfh.fm\/collections\/lh-stinger\" target=\"_blank\"\u003eLH Stinger\u003c\/a\u003e is a no-compromise cartesian 3D Printer designed for speed and precision, created as a long-lasting platform for those who like to push quality or speed to the extreme.\u003c\/p\u003e\n\u003cp\u003eFastener kit for LH Stinger 3D printer, made from 304 stainless steel, coated in black nickel. The kit ships in two reusable grid boxes and includes 20% over BOM quantity.\u003c\/p\u003e\n\u003ch3\u003eIncluded:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eM3 Washer * 12\u003c\/li\u003e\n\u003cli\u003eM4 Washer * 13\u003c\/li\u003e\n\u003cli\u003eM6 Washer * 11\u003c\/li\u003e\n\u003cli\u003eM3 Hex Nut * 19\u003c\/li\u003e\n\u003cli\u003eM5 Hex Nut * 11\u003c\/li\u003e\n\u003cli\u003eM3 Lock Nut * 6\u003c\/li\u003e\n\u003cli\u003eM2.5*8 SHCS * 6\u003c\/li\u003e\n\u003cli\u003eM3*8 SHCS * 26\u003c\/li\u003e\n\u003cli\u003eM2*10 SHCS * 3\u003c\/li\u003e\n\u003cli\u003eM5*10 SHCS * 3\u003c\/li\u003e\n\u003cli\u003eM3*12 SHCS * 76\u003c\/li\u003e\n\u003cli\u003eM5*12 SHCS * 3\u003c\/li\u003e\n\u003cli\u003eM6*12 SHCS * 11\u003c\/li\u003e\n\u003cli\u003eM3*14 SHCS * 6\u003c\/li\u003e\n\u003cli\u003eM3*22 SHCS * 8\u003c\/li\u003e\n\u003cli\u003eM3*30 SHCS * 33\u003c\/li\u003e\n\u003cli\u003eM3*35 SHCS * 8\u003c\/li\u003e\n\u003cli\u003eM5*35 SHCS * 6\u003c\/li\u003e\n\u003cli\u003eM3*40 SHCS * 2\u003c\/li\u003e\n\u003cli\u003eM3*45 SHCS * 3\u003c\/li\u003e\n\u003cli\u003eM3*6 BHCS * 16\u003c\/li\u003e\n\u003cli\u003eM2*8 BHCS * 10\u003c\/li\u003e\n\u003cli\u003eM3*8 BHCS * 10\u003c\/li\u003e\n\u003cli\u003eM6*8 BHCS * 6\u003c\/li\u003e\n\u003cli\u003eM3*10 BHCS * 13\u003c\/li\u003e\n\u003cli\u003eM3*12 BHCS * 23\u003c\/li\u003e\n\u003cli\u003eM3*16 BHCS * 6\u003c\/li\u003e\n\u003cli\u003eM8*16 BHCS * 13\u003c\/li\u003e\n\u003cli\u003eM3*20 BHCS * 10\u003c\/li\u003e\n\u003cli\u003eM3*30 BHCS * 6\u003c\/li\u003e\n\u003cli\u003eM3*35 BHCS * 3\u003c\/li\u003e\n\u003cli\u003eM3*40 BHCS * 6\u003c\/li\u003e\n\u003cli\u003eM3*8 FHCS * 12\u003c\/li\u003e\n\u003cli\u003eM3*10 FHCS * 13\u003c\/li\u003e\n\u003cli\u003eM4*10 FHCS * 4\u003c\/li\u003e\n\u003cli\u003eM6*14 FHCS * 13\u003c\/li\u003e\n\u003cli\u003eM3*16 FHCS * 2\u003c\/li\u003e\n\u003cli\u003eM3*18 FHCS * 4\u003c\/li\u003e\n\u003cli\u003eM3*20 FHCS * 2\u003c\/li\u003e\n\u003cli\u003eM3*22 FHCS * 2\u003c\/li\u003e\n\u003cli\u003eM4*25 FHCS * 2\u003c\/li\u003e\n\u003cli\u003e20S M3 T-Nut Square * 16\u003c\/li\u003e\n\u003cli\u003e20S M5 T-Nut Square * 6\u003c\/li\u003e\n\u003cli\u003e20S M3 T-Nut Drop-In * 2\u003c\/li\u003e\n\u003cli\u003e30S M3 T-Nut Square * 55\u003c\/li\u003e\n\u003cli\u003e30S M5 T-Nut Square * 6\u003c\/li\u003e\n\u003cli\u003e30S M6 T-Nut Square * 29\u003c\/li\u003e\n\u003cli\u003e30S M3 T-Nut Drop-In * 20\u003c\/li\u003e\n\u003cli\u003eHeat Insert M3x5x4 * 58\u003c\/li\u003e\n\u003cli\u003eHeat Insert M3x4.6x7 * 58\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eShim Rings 5x7x\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e.5mm * 20\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eShim Rings 5x10x1mm * 20\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore information may be found in the \u003ca rel=\"noopener\" title=\"LH Stinger GitHub repo\" href=\"https:\/\/github.com\/lhndo\/LH-Stinger\/\" target=\"_blank\"\u003eGitHub repo\u003c\/a\u003e and you can check out the full \u003ca rel=\"noopener\" title=\"LH Stionger Collection at dfh.fm\" href=\"https:\/\/dfh.fm\/collections\/lh-stinger\" target=\"_blank\"\u003eLH Stinger collection here\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44808911126750,"sku":"7128157006","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/gfgg.jpg?v=1709111019"},{"product_id":"zero-g-mercury-one-1-fasteners-kit","title":"Zero G Mercury One.1 Fasteners Kit","description":"\u003cp\u003eThe Mercury One.1 upgrade transforms your current Ender 5(Pro\/Plus) into a CoreXY system. This provides an improvement over the Cartesian system, which relies on V-rollers that may lack precision and demand considerable maintenance. Additionally, the CoreXY system is optimized for higher speeds, enhancing your 3D printing experience and quality.\u003c\/p\u003e\n\u003cp\u003eFastener kits come with 20% more fasteners, above BOM, and ship in reusable grid boxes. Kits available in stainless steel and black nickel coated stainless steel finishes. \u003c\/p\u003e\n\u003cp\u003eKit Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20S M3 Roll in spring loaded T-Nuts * 44\u003c\/li\u003e\n\u003cli\u003e20S M5 Roll in spring loaded T-Nuts * 25\u003c\/li\u003e\n\u003cli\u003eM5x50 ISO 4762 \/ DIN 912 * 10\u003c\/li\u003e\n\u003cli\u003eM5x20 ISO 4762 \/ DIN 912 * 10\u003c\/li\u003e\n\u003cli\u003eM5x12 ISO 4762 \/ DIN 912 * 10\u003c\/li\u003e\n\u003cli\u003eM5x8 ISO 4762 \/ DIN 912 * 10\u003c\/li\u003e\n\u003cli\u003eM3x35 ISO 4762 \/ DIN 912 * 15\u003c\/li\u003e\n\u003cli\u003eM3x30 ISO 4762 \/ DIN 912 * 10\u003c\/li\u003e\n\u003cli\u003eM3x25 ISO 4762 \/ DIN 912 * 10\u003c\/li\u003e\n\u003cli\u003eM3x20 ISO 4762 \/ DIN 912 * 20\u003c\/li\u003e\n\u003cli\u003eM3x16 ISO 4762 \/ DIN 912 * 12\u003c\/li\u003e\n\u003cli\u003eM3x12 ISO 4762 \/ DIN 912 * 10\u003c\/li\u003e\n\u003cli\u003eM3x8 ISO 4762 \/ DIN 912 * 80\u003c\/li\u003e\n\u003cli\u003eISO 4762 \/ DIN 912\u003c\/li\u003e\n\u003cli\u003eM3x5x4 Black Nickel Coated Brass Threaded Insert * 61 \u003c\/li\u003e\n\u003cli\u003eM3 Hex Nut * 15\u003c\/li\u003e\n\u003cli\u003eM3 Washer * 14\u003c\/li\u003e\n\u003cli\u003eM5 Washer * 40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore information on the project may be found \u003ca href=\"https:\/\/docs.zerog.one\/\" title=\"Zero G Docs\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Stainless Steel","offer_id":44823846355166,"sku":"4012333661","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Black Nickel Coated Stainless Steel","offer_id":44823846387934,"sku":"1740735877","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_6429.jpg?v=1709019963"},{"product_id":"pandoras-box-by-masturmynd-fastener-kit","title":"Pandora's Box by MasturMynd Fastener Kit","description":"\u003cp\u003e\u003ca rel=\"noopener\" title=\"Pandora's Box collection at dfh.fm\" href=\"https:\/\/dfh.fm\/collections\/pandoras-box-by-masturmynd\" target=\"_blank\"\u003ePandora's Box\u003c\/a\u003e is a modified version of the popular Voron V0 3D printer design. The printer has been enhanced with additional X and Y travel, a triple belted Z kinematic system, and an automatic bed tramming and meshing system.\u003c\/p\u003e\n\u003cp\u003eThe fasteners kit includes the following:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003cth\u003eRequired\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x6 FHCS\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x6 SHCS\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2 Nut\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM2x10 Self Tapping Screws\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x6 BHCS\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e46\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x8 BHCS\u003c\/td\u003e\n\u003ctd\u003e58\u003c\/td\u003e\n\u003ctd\u003e48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x10 BHCS\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x12 BHCS\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x16 BHCS\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x25 BHCS\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x30 BHCS\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x35 BHCS\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x40 BHCS\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x8 SHCS\u003c\/td\u003e\n\u003ctd\u003e44\u003c\/td\u003e\n\u003ctd\u003e36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x10 SHCS\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003ctd\u003e51\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x12 SHCS\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x14 SHCS\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x16 SHCS\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x20 SHCS\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x25 SHCS\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x30 SHCS\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x35 SHCS\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3x6x0.5 Shim Washer\u003c\/td\u003e\n\u003ctd\u003e51\u003c\/td\u003e\n\u003ctd\u003e42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Nut\u003c\/td\u003e\n\u003ctd\u003e178\u003c\/td\u003e\n\u003ctd\u003e148\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Black Nickel Coated Threaded Inserts\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM5x16 BHCS\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM5 Nut\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eN42 6mm x 3mm Round Neodymium Magnets\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMore information on the project may be found in MasturMynd's \u003ca title=\"Pandora's Box GitHub Repo\" href=\"https:\/\/github.com\/MasturMynd\/Pandoras_Box\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/MasturMynd\/Pandoras_Box\"\u003eGitHub repo\u003c\/a\u003e, and our \u003ca rel=\"noopener\" title=\"Pandora's Box collection at dfh.fm\" href=\"https:\/\/dfh.fm\/collections\/pandoras-box-by-masturmynd\" target=\"_blank\"\u003ePandora's Box collection page\u003c\/a\u003e. And, if you like tiny printers, check out our \u003ca title=\"Printers for Ants collection at dfh.fm\" href=\"https:\/\/dfh.fm\/collections\/printers-for-ants\" target=\"_blank\"\u003ePrinters for Ants collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Stainless Steel","offer_id":44824041291998,"sku":"2304885680","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Black Nickel Coated Stainless Steel","offer_id":44824041226462,"sku":"3845128912","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/gjghj.jpg?v=1709024102"},{"product_id":"rabbit-poop","title":"Rabbit Poop","description":"\u003cp\u003e\u003cstrong\u003eClearance ERCF v1.1 hardware bundles, sorted by cart count.\u003c\/strong\u003e Rabbit Poop is leftover dfh.fm Enraged Rabbit Carrot Feeder v1\/v1.1 stock: bearings, fasteners, magnets, and PTFE fittings packed for 4-, 6-, 9-, or 12-cart builds, with a shafts\/rods option if you need the long motion pieces too.\u003c\/p\u003e\n\u003ch3\u003eWhy this kit exists\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheap v1 hardware recovery:\u003c\/strong\u003e the official Enraged Rabbit Project BOM defines ERCF v1.1 as an N-channel system; these bundles are grouped by cart count for that v1\/v1.1 hardware family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood for repairs, spares, and salvage builds:\u003c\/strong\u003e buy the bearings, fasteners, magnets, and fittings without paying for a full current-generation ERCF kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional shafts\/rods included on marked variants:\u003c\/strong\u003e “With Shafts Kit” variants add the long motion set. If you only need that set by itself, use the \u003ca href=\"https:\/\/dfh.fm\/products\/enraged-rabbit-carrot-feeder-shafts-and-threaded-rods-set\"\u003eERCF Shafts and Threaded Rods Set\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and reference\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor Enraged Rabbit Carrot Feeder v1\/v1.1 builds, repairs, and parts bins.\u003c\/li\u003e\n\u003cli\u003eUseful around Voron\/Klipper multimaterial projects where ERCF v1 hardware is still being built, repaired, or scavenged.\u003c\/li\u003e\n\u003cli\u003ePrimary reference: \u003ca href=\"https:\/\/github.com\/EtteGit\/EnragedRabbitProject\"\u003eEtteGit EnragedRabbitProject\u003c\/a\u003e and the project’s \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/1A_qeNeaVprh_iPbvLcLjvJ2o2NfCzjuJam3K3RkWW0w\"\u003eofficial ERCF v1.1 BOM\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to choose\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChoose the cart count that matches the ERCF build or spares pile you are supporting: 4, 6, 9, or 12 cart.\u003c\/li\u003e\n\u003cli\u003eChoose a \u003cstrong\u003eWith Shafts Kit\u003c\/strong\u003e variant if you also need the long rods\/shaft set: 2 M5 threaded rods, 2 8mm smooth rods, and 1 5mm D-cut shaft cut for the matching cart count.\u003c\/li\u003e\n\u003cli\u003eIf you are starting fresh and want the newer generation instead of v1 leftovers, compare against the \u003ca href=\"https:\/\/dfh.fm\/products\/enraged-rabbit-carrot-feeder-v2-x-community-edition\"\u003eERCF V2.x Community Edition\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a complete ERCF kit and not an ERCF V2\/V3 conversion kit.\u003c\/li\u003e\n\u003cli\u003eDoes not include printed parts, electronics\/control board, motors, servo, Bondtech-style gears, belts\/pulleys, cable chain, toolhead sensor, or firmware unless those are bought separately.\u003c\/li\u003e\n\u003cli\u003eThis is clearance v1\/v1.1 surplus. Use the table and variant names as the source of what is in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContents by cart count\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003e4 Cart\u003c\/th\u003e\n\u003cth\u003e6 Cart\u003c\/th\u003e\n\u003cth\u003e9 Cart\u003c\/th\u003e\n\u003cth\u003e12 Cart\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e608ZZ bearing\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMR623 bearing\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMR85 ZZ bearing\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM10 PTFE press-fit fitting\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e6 × 3 mm N35 round magnets\u003c\/th\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003e41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM2 × 8 SHCS\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM3 washer, stainless steel\u003c\/th\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM3 × 40 SHCS\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM3 × 20 SHCS\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM3 × 16 SHCS\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM3 × 12 SHCS\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM3 × 8 SHCS\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e36\u003c\/td\u003e\n\u003ctd\u003e42\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM5 washer\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM5 lock nut\u003c\/th\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM5 hex nut\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM5 × 16 BHCS\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM5 × 30 BHCS\u003c\/th\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM3 × 8 BHCS\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM3 × 5 × 4 heat-set insert\u003c\/th\u003e\n\u003ctd\u003e44\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePair with \u003ca href=\"https:\/\/dfh.fm\/products\/ptfe-tube-1\"\u003ePTFE tube\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/enraged-rabbit-carrot-patch\"\u003eEnraged Rabbit Carrot Patch\u003c\/a\u003e, or the \u003ca href=\"https:\/\/dfh.fm\/products\/enraged-rabbit-carrot-feeder-toolhead-sensor-kit\"\u003eERCF Toolhead Sensor Kit\u003c\/a\u003e if your build needs those supporting parts.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"4 Cart","offer_id":45067774918878,"sku":"6312084145","price":19.99,"currency_code":"USD","in_stock":true},{"title":"6 Cart","offer_id":45067775049950,"sku":"9359045434","price":24.99,"currency_code":"USD","in_stock":true},{"title":"9 Cart","offer_id":45067775181022,"sku":"2536501958","price":29.99,"currency_code":"USD","in_stock":true},{"title":"12 Cart","offer_id":45067775312094,"sku":"8330405560","price":34.99,"currency_code":"USD","in_stock":true},{"title":"4 Cart With Shafts Kit","offer_id":45067885150430,"sku":"4243061545","price":30.99,"currency_code":"USD","in_stock":true},{"title":"6 Cart With Shafts Kit","offer_id":45067885183198,"sku":"2422644213","price":34.99,"currency_code":"USD","in_stock":true},{"title":"9 Cart With Shafts Kit","offer_id":45067885215966,"sku":"9827853245","price":39.99,"currency_code":"USD","in_stock":true},{"title":"12 Cart With Shafts Kit","offer_id":45067885248734,"sku":"9833546757","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/rabbit_poop_1000x1000_002.jpg?v=1712308186"},{"product_id":"heavy-duty-35mm-din-rails","title":"Heavy Duty 35mm Din Rails","description":"\u003cp\u003eBy popular request, I'm relisting the heavy duty, zinc coated, steel DIN rails. Lengths are, currently listed by printer size. Will make an effort to get exact measurements soon. For now, assume they work on Ants and Voron. Price is per rail.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"12mm printer","offer_id":45284761534686,"sku":"6021011018","price":4.99,"currency_code":"USD","in_stock":false},{"title":"160mm printer","offer_id":45284761567454,"sku":"6531708536","price":5.49,"currency_code":"USD","in_stock":false},{"title":"180mm printer","offer_id":45284761600222,"sku":"2182972007","price":5.99,"currency_code":"USD","in_stock":false},{"title":"250mm printer","offer_id":45284761632990,"sku":"8722835542","price":6.99,"currency_code":"USD","in_stock":true},{"title":"300mm printer","offer_id":45284761665758,"sku":"","price":7.99,"currency_code":"USD","in_stock":true},{"title":"350mm printer","offer_id":45284761698526,"sku":"7037264129","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/square_din-rail_2d0ae298-a781-4ff6-84e5-6b873f416b3b.jpg?v=1714202775"}],"url":"https:\/\/formosissima.myshopify.com\/collections\/fasteners.oembed?page=5","provider":"dfh.fm","version":"1.0","type":"link"}