{"title":"Filament","description":"","products":[{"product_id":"phaetus-aeforce-pet-gf-filament","title":"Phaetus aeForce™ PET-GF Filament 1kg Spool","description":"\u003cp\u003e1kg spool of \u003cstrong\u003e15% glass-filled PET\u003c\/strong\u003e (1.75mm) — an engineering-grade step up from ordinary PETG. The chopped glass fiber adds stiffness, creep resistance and dimensional stability, and it \u003cstrong\u003eanneals without warping\u003c\/strong\u003e for parts that need that extra strength. PET also runs hotter and tougher than PETG while still printing fine in open air.\u003c\/p\u003e\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cp\u003eFunctional parts: brackets, jigs, fixtures, motor\/sensor mounts, mechanical components that see moderate heat and load. Low moisture-pickup-rate, good chemical resistance, low warp\/shrink. Not a cosmetic filament — glass fill gives a matte, slightly rough finish.\u003c\/p\u003e\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA hardened nozzle is mandatory.\u003c\/strong\u003e Glass-filled material is abrasive and will chew through plated copper or brass in mere meters. Run a hardened steel, DLC-coated, tungsten-carbide, or ruby nozzle. If you don't have one, add one to the cart now — this is not optional with GF filament.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e280-320℃ — hardened\/DLC\/tungsten-carbide\/ruby required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60-80℃ — PEI with a release agent (see \u003ca href=\"https:\/\/dfh.fm\/products\/goo-by-frank-af\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egoo.by.frank.af\u003c\/a\u003e; helps your bed survive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot required — prints open air. Ventilate the room; GF\/PET can release VOCs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30-90 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry before use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePET is thirsty. If the spool has sat open, dry it (~70-80℃ for several hours) before printing — wet PET-GF prints stringy and weak.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eLiquidation stock — priced to move. Engineering filament has a shelf life once it picks up moisture; if you've got a use for tough glass-filled PET, grab it.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":43711476662494,"sku":"5378994134","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":43711476695262,"sku":"1884797130","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":44035869671646,"sku":"6107118823","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":44035869704414,"sku":"8390093854","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":44035869737182,"sku":"9242950565","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Beige","offer_id":44515192766686,"sku":"5417307346","price":41.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Screenshot2022-12-01at1.25.17PM.jpg?v=1669931381"},{"product_id":"phaetus-aeworthy™-abs-gf-filament","title":"Phaetus aeWorthy™ ABS-GF Filament 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeWorthy ABS-GF\u003c\/strong\u003e is an ABS engineering filament reinforced with \u003cstrong\u003e10% chopped glass fiber\u003c\/strong\u003e. The glass loading raises stiffness and dimensional stability and cuts the warping you fight with plain ABS, while keeping ABS's toughness and chemical resistance. It also runs with noticeably lower odor than typical ABS. Good fit for functional parts, brackets, jigs, fixtures, enclosures, and printer components that need to stay flat and hold tolerance in a heated chamber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec (Phaetus TDS):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase polymer: ABS + 10% glass fiber\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm  |  Spool: 1kg\u003c\/li\u003e\n\u003cli\u003eNozzle temp: 250-270°C\u003c\/li\u003e\n\u003cli\u003eBed temp: 100-110°C\u003c\/li\u003e\n\u003cli\u003eDensity: 1.10 g\/cm³ (ISO 1183)\u003c\/li\u003e\n\u003cli\u003eGlass transition: 101°C  |  Vicat softening: 106°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware you need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened nozzle required.\u003c\/strong\u003e Glass fiber is abrasive and will chew through a brass nozzle in a few hundred grams. Run a hardened steel, DLC-coated, tungsten carbide, or ruby nozzle. A 0.4mm or larger hardened nozzle is the safe default. (See our hardened \/ tungsten-carbide nozzles to pair with this spool.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosed printer.\u003c\/strong\u003e ABS-GF warps and delaminates in a cold draft, and printing ABS plus glass fiber releases VOCs\/particulates — print enclosed, in a ventilated room, ideally with filtration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry before use.\u003c\/strong\u003e ABS-GF is hygroscopic; absorbed moisture shows up as stringing, surface fuzz, and weak layer bonding. If the spool has been open or sitting, dry it (roughly 70-80°C for 4-6 hours) and print from a dry box for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a real engineering material, not a decorative filament — expect a matte, slightly textured finish and parts that are stiffer and more stable than standard ABS.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44035779494110,"sku":"8130764865","price":21.99,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":44035779526878,"sku":"5538077090","price":21.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":44035794010334,"sku":"5258720071","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":44035794043102,"sku":"4235589566","price":21.99,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":44200562262238,"sku":"2075573280","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":44319777226974,"sku":"4918086245","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/phaetus_filament_box_86526fdf-7ee2-4114-b767-714b4ca86bfe.png?v=1696737335"},{"product_id":"phaetus-aeworthy™-asa-gf-filament","title":"Phaetus aeWorthy™ ASA-GF Filament 1kg Spool","description":"\u003ch3\u003ePhaetus aeWorthy ASA-GF — glass-fiber reinforced ASA, 1.75mm, 1kg\u003c\/h3\u003e\n\u003cp\u003eASA reinforced with 10% chopped glass fiber. You get ASA's real strengths — UV stability and weather resistance for parts that live outdoors — plus the stiffness, dimensional stability and low-warp behavior the glass fiber adds. Phaetus also tunes this for lower odor than standard ASA, which is welcome on long prints. The finish is a matte, slightly textured \"carbon-fiber-look\" surface that hides layer lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it prints well:\u003c\/strong\u003e functional outdoor parts, automotive trim and brackets, enclosures, jigs, and larger models where plain ASA would warp. It is not a cosmetic high-gloss material — it is an engineering filament that trades shine for stiffness and stability.\u003c\/p\u003e\n\u003ch4\u003ePrint settings (Phaetus)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 250-270°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 100-110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e required. ASA cracks and delaminates in a draft, and it releases styrene VOCs — run it in an enclosure in a ventilated room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHardware you need\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis filament is abrasive — a hardened nozzle is required.\u003c\/strong\u003e Glass fiber will wear out a standard brass nozzle in a few spools and your dimensional accuracy goes with it. Run a hardened steel, DLC-coated, tungsten carbide, or ruby nozzle. If you do not already have one, add a hardened nozzle to your order before you load this — it is not optional with GF filament.\u003c\/p\u003e\n\u003ch4\u003eDrying\u003c\/h4\u003e\n\u003cp\u003eASA absorbs moisture over time. If the spool has been open, or you see stringing, steam, or popping at the nozzle, dry it (roughly 70-80°C for 4-6 hours in a filament dryer) before printing. Store it sealed with desiccant between uses.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: one reseller lists the glass-fiber content as 15-20%; Phaetus's own spec states 10%. We list it as Phaetus states it.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44035837362398,"sku":"9965777866","price":26.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":44200560197854,"sku":"3067069719","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":44200560230622,"sku":"6412854764","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/asa-gf-square.jpg?v=1679137355"},{"product_id":"phaetus-aecoating™-nexabs-gf25","title":"Phaetus aeCoating™ NexABS-GF25","description":"\u003ch3\u003ePhaetus aeCoating NexABS-GF25 — 25% glass-fiber ABS, 1kg \/ 1.75mm\u003c\/h3\u003e\n\u003cp\u003eA glass-fiber-reinforced ABS engineering filament. What makes the aeCoating line different is its \u003cstrong\u003eco-extrusion \"skin-core\" structure\u003c\/strong\u003e: the core is ABS loaded with 25% chopped glass fiber for stiffness and dimensional stability, and it's wrapped in a skin of unfilled ABS. The practical result is the warp resistance and rigidity you want from a GF-filled material, but with the \u003cstrong\u003einterlayer bonding restored\u003c\/strong\u003e by the unfilled skin — and a clean matte finish with no fiber strands floating on the surface.\u003c\/p\u003e\n\u003cp\u003eUse it where plain ABS isn't stiff enough or warps too much: brackets, jigs and fixtures, motor mounts, enclosures, and functional parts that see heat and load.\u003c\/p\u003e\n\u003ch4\u003ePrint settings (Phaetus published)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle \/ print temp:\u003c\/strong\u003e 250–270°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temp:\u003c\/strong\u003e 100–110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild surface:\u003c\/strong\u003e PEI or PC film, smooth or textured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e recommended — this is an ABS-based resin, so an enclosed\/draft-free chamber prevents warping and layer cracking on larger parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter \/ weight:\u003c\/strong\u003e 1.75mm, 1kg spool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHardware you need\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis filament is abrasive.\u003c\/strong\u003e The 25% glass fiber will chew through a brass nozzle quickly. Phaetus and resellers specify a \u003cstrong\u003ehardened steel, DLC-coated, tungsten-carbide, or ruby nozzle\u003c\/strong\u003e — run one or your nozzle geometry (and print quality) degrades within a spool. A 0.4mm or larger hardened nozzle is the safe default.\u003c\/p\u003e\n\u003ch4\u003eDrying\u003c\/h4\u003e\n\u003cp\u003eGlass-fiber ABS absorbs moisture. If the spool has been open or sitting, \u003cstrong\u003edry it before printing\u003c\/strong\u003e (roughly 60–70°C for several hours in a filament dryer) — wet GF-ABS prints rough, weak, and stringy.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHonest note:\u003c\/em\u003e this is a stiff, heat-tolerant engineering material, not a beginner filament. Plan for an enclosure, a hardened nozzle, and dry storage and it rewards you with strong, low-warp functional parts.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44200562589918,"sku":"4861693496","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":44200562622686,"sku":"3802902632","price":29.99,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":44200562688222,"sku":"9399083561","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":44200562720990,"sku":"9717219184","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":44317415342302,"sku":"3555508129","price":29.99,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":44317417111774,"sku":"8148114697","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/phaetus_filament_box_2c12be10-55c7-42c5-8584-a9c342e33e50.png?v=1696712313"},{"product_id":"phaetus-aeforce™-paht-cf","title":"Phaetus aeForce™ PAHT-CF","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeForce PAHT-CF\u003c\/strong\u003e is a high-temperature nylon reinforced with 15% chopped carbon fiber. It is an engineering filament for functional parts that need to stay stiff and dimensionally stable when they get hot or take load — gears, brackets, mounts, tooling, drone and RC parts, end-use mechanical components. This is the high-temp grade: it runs hotter and resists more heat than the common PA12-based \"PAHT-CF\" you see at hobby prices.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat it prints well:\u003c\/strong\u003e rigid, low-warp parts with a matte carbon finish. The carbon fiber forms a mesh skeleton through the matrix, so prints come off the bed with good dimensional stability and minimal warpage for a nylon. The base resin is a modified high-temp nylon with low moisture sensitivity (saturated absorption ~1.37%, roughly a tenth of plain PA6), so mechanical properties hold up far better than standard nylon once parts are in service.\u003c\/p\u003e\n\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened nozzle, non-negotiable.\u003c\/strong\u003e Carbon fiber is abrasive and will chew a brass nozzle in a few hundred grams. Run a hardened-steel, DLC-coated, tungsten-carbide, or ruby nozzle. Phaetus specs hardened steel or above, with a heating block of at least 12mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temp all-metal hotend.\u003c\/strong\u003e Nozzle temperature is \u003cstrong\u003e300-320°C\u003c\/strong\u003e — above what many stock hotends and PTFE-lined setups can handle. Plan for an all-metal hotend rated to these temps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure recommended.\u003c\/strong\u003e Helps with warp control at these temperatures and contains fumes — print in a well-ventilated space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrint settings (from Phaetus's TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle: 300-320°C\u003c\/li\u003e\n\u003cli\u003eBed: 70-90°C, PEI sheet or a coat of PVP glue stick\u003c\/li\u003e\n\u003cli\u003ePart cooling fan: OFF\u003c\/li\u003e\n\u003cli\u003ePrint speed: 30-120 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity 1.20 g\/cm3; melt point 237°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDrying — read this before you print\u003c\/h3\u003e\n\u003cp\u003eNylon absorbs water from the air. Wet filament prints with stringing, popping\/bubbling extrusion, and a rough surface. Dry the spool at \u003cstrong\u003e80-100°C for 4-6 hours\u003c\/strong\u003e and feed it straight from a dry box held below 15% RH. Reseal unused filament in its foil bag. Even though this grade is low-moisture for a nylon, it still needs dry handling for clean prints.\u003c\/p\u003e\n\n\u003ch3\u003eOptional: annealing\u003c\/h3\u003e\n\u003cp\u003eAnnealing finished parts at 80-100°C for 4-8 hours (then cooling naturally) further raises strength and heat resistance — HDT climbs from ~82°C as-printed toward ~190°C annealed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eSpool: 1kg net, 1.75mm, black. Pairs with a hardened nozzle and a filament dryer\/dry box — see related items.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44200721973470,"sku":"1640167404","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/phaetus_filament_box_305e28d7-5fd0-4f84-aff5-84dc700b8a37.png?v=1696737177"},{"product_id":"phaetus-pla-aero-filament","title":"Phaetus aeWorthy™ PLA-AERO 1kg Spool","description":"\u003ch4\u003eLightweight active-foaming PLA — half the weight, matte finish\u003c\/h4\u003e\n\u003cp\u003ePhaetus aeWorthy PLA-AERO is a foaming PLA: as the nozzle gets hotter, the filament expands and the printed part gets lighter and less dense. You tune the foaming by temperature, so you can dial parts from denser\/stronger at the low end to very light at the high end — up to roughly 200% expansion and about half the weight of standard PLA at the same volume. The surface comes out matte, which hides layer lines and takes paint and primer well. Built for RC wings and planes, drones, ship and aircraft models, large display pieces, and cosplay where weight, not load-bearing strength, is the goal.\u003c\/p\u003e\n\n\u003ch5\u003ePrint settings (Phaetus)\u003c\/h5\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm  |  \u003cstrong\u003eSpool:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 200-240C — this is your foaming control. Lower = denser and stronger, higher = lighter and more foamed. Run a temperature tower to find your weight\/strength sweet spot.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 40-60C on glass, PC, or PEI film\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 30-90 mm\/s\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart-cooling fan:\u003c\/strong\u003e ON\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eTwo things that make or break foaming PLA\u003c\/h5\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDry it first.\u003c\/strong\u003e Foaming PLA is humidity-sensitive — damp filament foams unevenly and leaves a rough, blistered surface. Dry around 55C for 6-8 hours before printing, and again after the spool has been sitting. A filament dryer or dry box is strongly recommended for consistent results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduce your flow \/ tune extrusion multiplier.\u003c\/strong\u003e Because the material expands in the nozzle, most slicers over-extrude with foaming PLA out of the box. Drop flow (commonly to ~50-60% at the high-temp\/high-foam end) and re-tune per temperature. This is normal for the foaming-PLA class, not a defect.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eHardware\u003c\/h5\u003e\n\u003cp\u003eThis is unfilled PLA — no glass or carbon fiber — so a standard brass nozzle is fine; no hardened or DLC nozzle required. If you want maximum foaming throughput on large wings, a larger-diameter nozzle (0.6-0.8 mm) gives the material more room to expand.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e1 kg spool, 1.75 mm. Available in White, Grey, Red, and Yellow.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"White","offer_id":44319478055134,"sku":"5775516320","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":44319478087902,"sku":"3355488022","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":44319478120670,"sku":"6882183912","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":44319478153438,"sku":"4633072575","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeWorthy_PLA-Aero_1_png.webp?v=1692638345"},{"product_id":"phaetus-aeworthy™-asa-aero-1kg","title":"Phaetus aeWorthy™ ASA-AERO 1kg","description":"\u003ch2\u003ePhaetus aeWorthy ASA-AERO — Lightweight Foaming ASA, 1.75mm, 1kg\u003c\/h2\u003e\n\u003cp\u003eASA-AERO is a foaming ASA: a chemical blowing agent sits dormant in the filament and activates in the hotend, so you tune print weight straight from the nozzle temperature. Run it hotter and the material foams more and prints lighter — Phaetus rates up to a 250% foaming ratio, which can bring a finished part down to roughly 40-50% of the weight of the same part in standard ASA. It keeps ASA's UV-aging and heat resistance, so parts hold up outdoors.\u003c\/p\u003e\n\u003cp\u003eIt's built for weight-critical work: RC aircraft and foamies, ship models, drone parts, and anywhere you want stiffness-per-gram without going to foam board. The foamed surface comes out matte, which softens the look of layer lines.\u003c\/p\u003e\n\u003ch3\u003eWhat it prints like\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet weight with temperature.\u003c\/strong\u003e Nozzle 240-280C — lower end = denser\/stronger, higher end = lighter\/more foam. Dial it in on a test part before committing a build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn retraction OFF.\u003c\/strong\u003e The filament keeps expanding inside the nozzle, so stringing during travels is inherent and retraction tuning won't clear it. Phaetus recommends disabling retraction and cleaning up travels in slicer instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse an enclosure.\u003c\/strong\u003e Like all ASA, it wants a warm ambient (roughly 40-70C) to release internal stress and stop warping. Bed 80-110C on glass, PEI, or PVP glue stick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle size.\u003c\/strong\u003e \u0026gt;=0.4mm works; go \u0026gt;=0.6mm for thin single-wall models so foamed walls keep their strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate.\u003c\/strong\u003e ASA outgasses — run it in a ventilated room.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNo hardened nozzle needed.\u003c\/strong\u003e ASA-AERO is foamed chemically, not filled with glass or carbon fiber, so it is \u003cem\u003enot\u003c\/em\u003e abrasive — a standard brass or plated-copper nozzle is fine. (Don't confuse it with the fiber-filled aeWorthy line — ASA-GF and ABS-GF \u003cem\u003eare\u003c\/em\u003e abrasive and do need a hardened\/wear-resistant nozzle.)\u003c\/p\u003e\n\u003ch3\u003eKeep it dry\u003c\/h3\u003e\n\u003cp\u003eASA is hygroscopic and a foaming filament is especially fussy about moisture — wet filament foams inconsistently and can bubble or string worse. Dry before use (around 80C for ~8 hours is typical for ASA-Aero; Phaetus's TDS doesn't publish an exact schedule) and print from a dry box if you can. A filament dryer is the right pairing here.\u003c\/p\u003e\n\u003cp\u003eSpec: 1.75mm, 1kg net, Natural. Base filament density 1.03 g\/cm3. Nozzle 240-280C, bed 80-110C, enclosure recommended, retraction off, brass nozzle OK.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Natural","offer_id":44319763693790,"sku":"2163974101","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeWorthy_ASA-Aero_1_png.webp?v=1692654281"},{"product_id":"phaetus-aeworthy™-toughpetg-hs-1kg-spool","title":"Phaetus aeWorthy™ ToughPETG-HF 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeWorthy ToughPETG-HF\u003c\/strong\u003e is a toughness-modified, high-flow PETG built for fast, reliable printing. It keeps PETG's good chemical and heat resistance while adding meaningful impact strength over standard PETG, and it's tuned to stay dimensionally accurate at high print speeds. Good choice for functional parts, brackets, enclosures, and end-use components where you want durability without jumping to a fiber-reinforced engineering filament.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHeads up: this is listed under \"ToughPETG-HS\" but Phaetus's actual product name is ToughPETG-HF. Same spool — the \"HF\" stands for the high-flow\/high-speed formula.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003ePrint settings\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpool weight:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temp:\u003c\/strong\u003e 230-260 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temp:\u003c\/strong\u003e 70-80 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 30-250 mm\/s (Phaetus rates the formula up to ~400 mm\/s on capable hardware)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e low (0-50%), like most PETG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNozzle\u003c\/h4\u003e\n\u003cp\u003eThis is straight PETG — \u003cstrong\u003enot abrasive\u003c\/strong\u003e. A stock brass nozzle is perfectly fine; no hardened or DLC nozzle needed. (If you're also running glass- or carbon-filled filament, that's where a hardened nozzle matters — this one doesn't need it.)\u003c\/p\u003e\n\u003ch4\u003eDrying \u0026amp; storage\u003c\/h4\u003e\n\u003cp\u003ePETG absorbs moisture from the air. If the spool has been open or sat in humidity, dry it before printing (roughly 65 °C for 4-6 hours in a filament dryer) to avoid stringing and surface bubbling. Store sealed with desiccant between sessions.\u003c\/p\u003e\n\u003cp\u003e1.75 mm, 1 kg net. Sold by color.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"White","offer_id":44319768281310,"sku":"6487130639","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":44319771853022,"sku":"6186823084","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":44319771885790,"sku":"4011639760","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":44319771918558,"sku":"6183101894","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":44319771951326,"sku":"4480853583","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":44319771984094,"sku":"2460612398","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":44319772016862,"sku":"9886292081","price":11.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeWorthy_ToughPETG-HF_5_png.webp?v=1692654521"},{"product_id":"phaetus-aeworthy™-petg-cf-1kg-spool","title":"Phaetus aeWorthy™ PETG-CF 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeWorthy PETG-CF\u003c\/strong\u003e is PETG reinforced with chopped carbon fiber on a 1.75mm, 1kg spool (Black). It's the stiffness-and-finish upgrade over plain PETG: more rigid, more dimensionally stable, lower warp, with a matte black surface that hides layer lines. Good for functional parts that don't need the heat resistance of a nylon — jigs and fixtures, brackets, enclosures, drone\/RC frames, and cosmetic functional prints.\u003c\/p\u003e\n\u003ch3\u003ePrint settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 235-260°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 70-80°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 30-60 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e not required (PETG-class), but helps with consistency on larger parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware: you need a hardened nozzle\u003c\/h3\u003e\n\u003cp\u003eCarbon fiber is abrasive. It will wear out a standard brass nozzle quickly. Run a \u003cstrong\u003ehardened steel, DLC-coated, tungsten carbide, or ruby nozzle\u003c\/strong\u003e — Phaetus recommends these for their Dragon, Dragonfly, and Rapido hotends. If you don't already have one, add a hardened or DLC nozzle to your order before printing this.\u003c\/p\u003e\n\u003ch3\u003eDrying\u003c\/h3\u003e\n\u003cp\u003ePETG-CF is hygroscopic and carbon-fiber blends pull in moisture fast. \u003cstrong\u003eDry before use\u003c\/strong\u003e if the spool has been open or sitting — wet filament gives you stringing, popping, and a rough surface. A filament dryer or a low oven (follow your dryer's PETG profile) restores it. Store sealed with desiccant.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e1.75mm diameter, 1kg net weight. Exact carbon-fiber percentage and density are not published on Phaetus's data sheet; comparable PETG-CF filaments run roughly 10-15% chopped CF. This is an engineering filament — moisture-sensitive, so buy what you'll use.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319781322974,"sku":"9374787181","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeWorthy_PETG-CF_1_png.webp?v=1692655398"},{"product_id":"phaetus-aeflex™-tpu-85a-hf-filament-1kg-spool","title":"Phaetus aeFlex™ TPU-85A-HF Filament 1kg Spool","description":"\u003ch2\u003ePhaetus aeFlex TPU-85A-HF — soft 85A flexible, built for speed\u003c\/h2\u003e\n\u003cp\u003eA Shore \u003cstrong\u003e85A\u003c\/strong\u003e flexible TPU in Phaetus's \u003cstrong\u003ehigh-flow (HF)\u003c\/strong\u003e grade. It's noticeably softer and more rubbery than the 90A\/95A TPUs most people start with, but the HF formulation is tuned to keep flowing at speed — Phaetus rates it for \u003cstrong\u003eover 100 mm\/s\u003c\/strong\u003e when paired with a capable direct-drive extruder. Good for gaskets, seals, grommets, vibration dampers, protective cases, RC tires, and any squishy functional part.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSoft, grippy, high-elongation parts that need to bend and bounce back.\u003c\/li\u003e\n\u003cli\u003eFaster than typical soft TPU thanks to the high-flow grade — you don't have to crawl at 15 mm\/s.\u003c\/li\u003e\n\u003cli\u003eLayer bonding and surface finish are good in the 85A-HF class when dry and run at moderate retraction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-drive extruder strongly recommended.\u003c\/strong\u003e 85A is soft enough that it buckles and jams in most Bowden setups. A short, well-constrained filament path matters more than raw temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo hardened nozzle needed.\u003c\/strong\u003e This is unfilled TPU — no glass or carbon fiber — so a standard brass nozzle is fine. (Only our glass\/carbon-filled engineering lines need a hardened or DLC nozzle.)\u003c\/li\u003e\n\u003cli\u003eHeated bed helpful but gentle; smooth PEI or a glue stick gives clean release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTemperatures (start here, then dial in)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e ~200-225C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e ~20-50C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e ~1.16 g\/cm3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese are typical values for the 85A high-flow TPU class. Confirm against Phaetus's published TDS for this exact spool and tune in 5C steps.\u003c\/p\u003e\n\n\u003ch3\u003eDrying — do not skip this\u003c\/h3\u003e\n\u003cp\u003eTPU is hygroscopic and re-absorbs moisture fast. Wet filament prints stringy, rough, and weak. Dry before use: \u003cstrong\u003e~50-65C for 4-6h\u003c\/strong\u003e (or 70C for ~7h) in a filament dryer or oven, then print straight from a dry box or reseal with desiccant. If a spool has been open on the shelf, dry it first — every time.\u003c\/p\u003e\n\n\u003cp\u003eStock-clearance pricing. New, factory-sealed 1kg spool, Black, 1.75mm.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319785451742,"sku":"8006158198653","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeFlex_TPU-85A-HF_1_png.webp?v=1692655658"},{"product_id":"phaetus-aeforce™-pet-cf-filament-1kg-spool","title":"Phaetus aeForce™ PET-CF Filament 1kg Spool","description":"\u003ch2\u003ePhaetus aeForce PET-CF — 15% Carbon Fiber Reinforced PET, 1.75mm, 1kg\u003c\/h2\u003e\n\u003cp\u003eA carbon-fiber-reinforced PET engineering filament for functional, load-bearing parts. The PET base brings low moisture sensitivity (relative to nylon), high strength, creep resistance, good chemical resistance and high heat resistance; the 15% chopped carbon fiber adds stiffness and a matte finish while suppressing PET's tendency to warp. Phaetus's \"Smart Fiber Reinforced Technology\" forms a fiber mesh inside the material so prints stay dimensionally stable with minimal shrinkage. Prints fine on an open-frame machine — \u003cstrong\u003eno heated chamber required\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiff functional parts: brackets, mounts, jigs, fixtures, drone and RC frames, tooling.\u003c\/li\u003e\n\u003cli\u003eParts that see heat or humidity — PET-CF handles both better than PLA-CF and is less moisture-fussy than nylon-CF.\u003c\/li\u003e\n\u003cli\u003eMatte black finish that hides layer lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrint settings (from Phaetus's TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle \/ print temp:\u003c\/strong\u003e 280-320°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed \/ build plate:\u003c\/strong\u003e 60-80°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 30-90 mm\/s (45 mm\/s in the datasheet test)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling fan:\u003c\/strong\u003e low\/off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.30 g\/cm³ · \u003cstrong\u003eMelting temp:\u003c\/strong\u003e 251°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHardened nozzle required (abrasive)\u003c\/h3\u003e\n\u003cp\u003eCarbon fiber is abrasive — it will chew through a standard brass nozzle quickly. Run a \u003cstrong\u003ehardened steel, DLC-coated, tungsten carbide, or ruby nozzle\u003c\/strong\u003e. If you don't already have one, add a hardened nozzle to your order. A 0.4mm hardened nozzle is the baseline; 0.6mm+ feeds CF more reliably and is more wear-tolerant.\u003c\/p\u003e\n\n\u003ch3\u003eKeep it dry\u003c\/h3\u003e\n\u003cp\u003ePET's moisture absorption is low but it prints poorly when wet — expect stringing, popping\/bubbles in the extrusion, and a rough surface. \u003cstrong\u003eDry before printing: oven at 100-120°C for 4-6 hours\u003c\/strong\u003e, then print straight from a dry box held below 15% RH. A filament dryer or sealed dry box is strongly recommended for any CF-filled engineering material.\u003c\/p\u003e\n\n\u003ch3\u003eOptional: annealing\u003c\/h3\u003e\n\u003cp\u003eHeat deflection is ~87°C as printed. Anneal finished parts at 80-100°C for 4-8 hours (Phaetus tests at 100°C\/8h) to raise heat resistance toward ~175°C and increase strength. Let parts cool to room temperature naturally.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eSingle 1kg spool, 1.75mm, black. Sold as-is from inventory — verify your printer hotend can reach 300°C+ and has a hardened nozzle before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319787778270,"sku":"2994179635","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeForce_PET-CF_1_png.webp?v=1692656345"},{"product_id":"phaetus-aeforce™-paht-gf-filament-1kg-spool","title":"Phaetus aeForce™ PAHT-GF Filament 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeForce PAHT-GF\u003c\/strong\u003e is a high-temperature nylon (polyamide) reinforced with \u003cstrong\u003e15% chopped glass fiber\u003c\/strong\u003e. It's an engineering filament for functional parts that need stiffness, heat resistance, and dimensional stability — brackets, mounts, jigs, tooling, and machine or automotive components. Compared to plain nylon it warps and shrinks less, and the glass fill adds rigidity and wear resistance while keeping the toughness nylon is known for.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiff, heat-resistant functional parts (PAHT base handles far more heat than PLA\/PETG)\u003c\/li\u003e\n\u003cli\u003eLow warp and low shrinkage for a nylon, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eWear- and chemical-resistant components\u003c\/li\u003e\n\u003cli\u003ePairs with Phaetus aeSupport S-PAHT quick-remove support if you need clean overhangs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrint settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle \/ print temp:\u003c\/strong\u003e 300-320 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temp:\u003c\/strong\u003e 70-90 °C (use an adhesion aid)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e strongly recommended — this is a high-temp engineering nylon; an enclosed, draft-free chamber gives you the layer adhesion and warp control these materials need\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend:\u003c\/strong\u003e must reach and hold 320 °C reliably (Phaetus recommends their Dragon \/ Dragonfly series, but any all-metal high-temp hotend that hits 320 °C works)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHardware you need — read this\u003c\/h3\u003e\n\u003cp\u003eGlass fiber is \u003cstrong\u003eabrasive\u003c\/strong\u003e. A brass nozzle will wear out quickly and start under-extruding. \u003cstrong\u003eRun a hardened-steel, DLC-coated, or ruby nozzle.\u003c\/strong\u003e If you don't have one, add it to your cart — printing GF nylon through brass is a false economy. (We carry hardened and DLC nozzles; see related products.)\u003c\/p\u003e\n\n\u003ch3\u003eDrying — not optional\u003c\/h3\u003e\n\u003cp\u003eGlass-filled high-temp nylon is \u003cstrong\u003ehygroscopic\u003c\/strong\u003e — it pulls moisture from the air fast, and wet filament prints with popping, stringing, weak layers, and a rough surface. \u003cstrong\u003eDry it before printing\u003c\/strong\u003e and keep it in a dry box while you print. As a general nylon guideline, dry in a filament dryer or low oven until it runs clean; this spool may have absorbed moisture sitting on a shelf, so dry it first regardless of how it looks.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eClearance stock — sold as-is. Engineering nylon is moisture-sensitive; we recommend drying before first use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319798296798,"sku":"3165120304","price":59.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":44319798657246,"sku":"8215280664","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":44319800262878,"sku":"2203872751","price":59.99,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":44319800656094,"sku":"3142176675","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeForce_PAHT-GF_1_png.webp?v=1692656747"},{"product_id":"phaetus-aecoating™-nexpa-gf25-filament-1kg-spool","title":"Phaetus aeCoating™ NexPA-GF25 Filament","description":"\u003ch2\u003ePhaetus aeCoating NexPA-GF25 — 25% Glass-Fiber High-Temp Nylon\u003c\/h2\u003e\n\u003cp\u003eA high-temperature, glass-fiber-reinforced nylon for stiff, heat-stable functional parts. Phaetus builds it with a co-extrusion \u003cstrong\u003eskin-core\u003c\/strong\u003e structure: a pure-nylon outer skin wrapped around a core packed with 25% chopped glass fiber. The point of that design is two-fold — the skin gives you clean, pure-resin Z-layer bonding (so you don't lose interlayer strength the way plain GF nylon does), and it keeps most of the abrasive fiber off the nozzle wall.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cp\u003eFunctional engineering parts that need to stay stiff and dimensionally stable when warm: brackets, mounts, jigs and fixtures, tooling, motion and drivetrain components, and thin-walled parts that still need real mechanical strength. As-printed tensile strength is ~97 MPa (X-Y), and heat-deflection temperature reaches ~195°C after annealing — well beyond what PETG or ABS will hold.\u003c\/p\u003e\n\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened or DLC nozzle — required.\u003c\/strong\u003e Glass fiber is abrasive. The skin-core layout reduces nozzle wear versus standard GF nylon, but a brass nozzle will still erode. Run hardened steel or DLC. (We sell hardened\/DLC nozzles — pair one with this spool.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temp hotend.\u003c\/strong\u003e Print at 300-340°C; you need an all-metal hotend rated to those temps, ideally with a heater block of 12mm or more for stable flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure recommended.\u003c\/strong\u003e Cooling fan OFF, bed 70-80°C on PEI (or a swipe of PVP glue stick). An enclosure helps with warp and consistency on a high-temp nylon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrint settings (from Phaetus's TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle: 300-340°C\u003c\/li\u003e\n\u003cli\u003eBed: 70-80°C, PEI or PVP glue\u003c\/li\u003e\n\u003cli\u003ePart cooling fan: OFF\u003c\/li\u003e\n\u003cli\u003ePrint speed: 30-120 mm\/s\u003c\/li\u003e\n\u003cli\u003eNozzle size: 0.4-1.0mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm  |  Density: 1.29 g\/cm³\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDrying — read this first\u003c\/h3\u003e\n\u003cp\u003eNylon is thirsty. Wet filament oozes, bubbles, and prints rough. Keep the spool in a dry box (humidity under 15%) \u003cem\u003ewhile you print\u003c\/em\u003e, and reseal it in the foil bag when you're done. If it has picked up moisture, dry at \u003cstrong\u003e80-100°C for 4-6 hours\u003c\/strong\u003e before printing. Optional: anneal finished parts at 80-100°C for 4-8h to push strength and heat resistance higher.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eEngineering filament, sold as liquidation stock — factory-sealed. Because it's hygroscopic, dry before use if the seal has been opened.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"500g \/ Black","offer_id":44319806226654,"sku":"7277428245","price":38.99,"currency_code":"USD","in_stock":false},{"title":"500g \/ Red","offer_id":44319806259422,"sku":"6032509287","price":38.99,"currency_code":"USD","in_stock":false},{"title":"500g \/ Blue","offer_id":44319806292190,"sku":"4329799983","price":38.99,"currency_code":"USD","in_stock":false},{"title":"500g \/ Orange","offer_id":44319806324958,"sku":"3447223590","price":38.99,"currency_code":"USD","in_stock":false},{"title":"1kg \/ Black","offer_id":44319803343070,"sku":"5640179320","price":69.99,"currency_code":"USD","in_stock":false},{"title":"1kg \/ Red","offer_id":44319803375838,"sku":"1814110038","price":69.99,"currency_code":"USD","in_stock":true},{"title":"1kg \/ Blue","offer_id":44319803408606,"sku":"9406816931","price":69.99,"currency_code":"USD","in_stock":true},{"title":"1kg \/ Orange","offer_id":44319803441374,"sku":"6147346054","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeCoating_NexPA-GF25_1_png.webp?v=1692657150"},{"product_id":"phaetus-aecoating™-nexpa-cf25-filament","title":"Phaetus aeCoating™ NexPA-CF25 Filament","description":"\u003ch2\u003ePhaetus aeCoating NexPA-CF25 — Co-Extrusion 25% Carbon Fiber PAHT Nylon\u003c\/h2\u003e\n\u003cp\u003eA high-temperature carbon-fiber nylon built for stiff, heat-resistant, dimensionally stable functional parts — engineering brackets, jigs and fixtures, RC\/drone frames, automotive and tooling components. The base is a high-temp PAHT (PPA-class) nylon reinforced with 25% chopped carbon fiber.\u003c\/p\u003e\n\u003ch3\u003eWhat makes it different: co-extrusion skin-core\u003c\/h3\u003e\n\u003cp\u003eUnlike conventional single-extrusion CF nylon, NexPA-CF25 is built with a skin-core structure: the abrasive carbon fiber sits in the core under a pure-resin outer skin. Two practical results — better Z-axis interlayer adhesion (the bond comes from fiber-free resin at the layer boundary), and reduced nozzle wear because less fiber contacts the nozzle wall on the way out. It is still an abrasive filament, but it is engineered to be gentler on hardware than typical CF nylon.\u003c\/p\u003e\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened nozzle is mandatory.\u003c\/strong\u003e Carbon fiber is abrasive — a brass nozzle will be destroyed. Use a hardened-steel nozzle at minimum; tungsten carbide is ideal for long runs. Phaetus specs a heater block of at least 12mm to hold temp at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-metal hotend rated to 340°C.\u003c\/strong\u003e Print temp is 300-340°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo enclosure required.\u003c\/strong\u003e This grade prints open-frame; a heated chamber is not needed (good ventilation is still recommended — CF nylon can release fumes).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint settings (from Phaetus TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle \/ print temp: \u003cstrong\u003e300-340°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed: \u003cstrong\u003e70-80°C\u003c\/strong\u003e, PEI surface or a coat of PVP (glue stick)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter: 0.4-1.0mm\u003c\/li\u003e\n\u003cli\u003ePrint speed: 30-90 mm\/s\u003c\/li\u003e\n\u003cli\u003eRecommended support: S-PAHT quick-remove support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrying — read this first\u003c\/h3\u003e\n\u003cp\u003eNylon absorbs moisture fast. Load it into a dry box (below 15% RH) the moment you open the vacuum bag. If it has picked up moisture you'll see oozing, popping\/bubbles, and rough surfaces — dry at \u003cstrong\u003e80-100°C for 4-6 hours\u003c\/strong\u003e to recover. For maximum strength, parts can be annealed at 80-100°C for 4-8 hours and cooled naturally.\u003c\/p\u003e\n\u003ch3\u003eMechanical properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTensile strength (X-Y): 103 MPa  |  Young's modulus: ~8790 MPa\u003c\/li\u003e\n\u003cli\u003eBending strength: 170 MPa  |  Bending modulus: ~8570 MPa\u003c\/li\u003e\n\u003cli\u003eHeat deflection temp: 122.5°C @ 1.8 MPa (187.5°C @ 0.45 MPa)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.23 g\/cm³  |  Diameter: 1.75mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eEngineering filament — sold from clearance stock. Store sealed and dry; dry before printing for best results.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"500g \/ Black","offer_id":44319815434462,"sku":"4853508549","price":54.99,"currency_code":"USD","in_stock":false},{"title":"1kg \/ Black","offer_id":44319815565534,"sku":"7208950611","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeCoating_NexPA-CF25_1-1_png.webp?v=1692658103"},{"product_id":"phaetus-aeflex™-tpu-78d-1kg-spool","title":"Phaetus aeFlex™ TPU-78D 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeFlex TPU-78D\u003c\/strong\u003e is a high-hardness, semi-rigid TPU filament. At Shore \u003cstrong\u003e78D\u003c\/strong\u003e it sits at the stiff end of the flexible spectrum - nothing like a soft 95A. The higher surface hardness and modulus mean it pushes through the extruder without buckling, so you get the success rate of a near-rigid material plus TPU's impact and abrasion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it prints well:\u003c\/strong\u003e durable functional parts that need toughness without floppiness - snap-fit enclosures, bumpers and protective housings, semi-flexible brackets and jigs, gaskets and seals that must hold their shape, and reinforced living hinges.\u003c\/p\u003e\n\u003ch3\u003ePrint settings (Phaetus TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle \/ print temp:\u003c\/strong\u003e 210-230 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temp:\u003c\/strong\u003e 50-70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild surface:\u003c\/strong\u003e glass, PEI film, or PC film\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 30-120 mm\/s. Direct-drive extruders handle ≥100 mm\/s comfortably; Bowden setups should stay 30-60 mm\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling fan:\u003c\/strong\u003e on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e standard brass or plated-copper. This is an \u003cem\u003eunfilled\u003c\/em\u003e TPU - no glass or carbon fiber - so it is \u003cstrong\u003enot abrasive\u003c\/strong\u003e and does \u003cstrong\u003enot\u003c\/strong\u003e require a hardened or DLC nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrying - read this\u003c\/h3\u003e\n\u003cp\u003eTPU is hygroscopic. Wet filament oozes, prints with bubbles, and finishes rough. Keep the spool in a dry box below 15% RH once the vacuum bag is opened, and reseal in the original foil bag when not printing. If it has picked up moisture, \u003cstrong\u003edry at 70-80 °C for 4-6 hours\u003c\/strong\u003e to restore print quality.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e TPU, Shore 78D (semi-rigid), unfilled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.28 g\/cm³ (ISO 1183)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile strength at break:\u003c\/strong\u003e 33.81 MPa · \u003cstrong\u003eElongation at break:\u003c\/strong\u003e ~237% · \u003cstrong\u003eFlexural modulus:\u003c\/strong\u003e ~1026 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e not required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319822086366,"sku":"5265848906","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeFlex_TPU-78D_1_png.webp?v=1692658581"},{"product_id":"asa-cf-filament-black","title":"ASA-CF Filament","description":"\u003cp\u003e\u003cstrong\u003eDecent ASA-CF in Black is a carbon-fiber reinforced ASA filament for stiff, weather-ready functional prints.\u003c\/strong\u003e Use it when plain ASA is not rigid enough and PLA or PETG will not survive sunlight, heat, or outdoor service.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-CF?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base material:\u003c\/strong\u003e ASA is used for UV and weather resistance on outdoor brackets, panels, enclosures, fixtures, and printer parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-fiber reinforcement:\u003c\/strong\u003e adds stiffness, dimensional stability, and a dark matte texture that helps hide layer lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack engineering finish:\u003c\/strong\u003e a practical color for visible functional parts, printer mods, jigs, and exterior hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-CF — carbon-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e FDM 3D-printer filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished diameter, net spool weight, tolerance, and carbon-fiber percentage:\u003c\/strong\u003e not exposed in the current product record or photo; verify packaging before adding exact numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse an enclosure.\u003c\/strong\u003e ASA is draft-sensitive and prints best in a ventilated enclosed printer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse a wear-resistant nozzle.\u003c\/strong\u003e Carbon-fiber filament is abrasive; pair it with a \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ehardened steel nozzle\u003c\/a\u003e, DLC, ruby, or tungsten-carbide nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry before tuning if needed.\u003c\/strong\u003e If you see popping, steam, rough extrusion, or excess stringing, dry the spool before chasing slicer settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutdoor printer parts, brackets, ducts, mounts, enclosures, panels, fixtures, and functional prototypes that need stiffness plus UV\/weather resistance.\u003c\/li\u003e\n\u003cli\u003eVoron-style enclosed printers and other enclosed FDM machines set up for abrasive engineering filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a brass-nozzle filament; carbon fiber will wear ordinary brass nozzles.\u003c\/li\u003e\n\u003cli\u003eNot a low-odor open-frame PLA replacement. Treat it like ASA: ventilate, enclose, and manage warping.\u003c\/li\u003e\n\u003cli\u003eNot the best choice for highly impact-loaded parts where toughness matters more than stiffness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Prints easily... Solid feel with a nice texture on the walls that hide layers well.” — Jessie, verified buyer\u003c\/blockquote\u003e","brand":"Decent","offers":[{"title":"Black","offer_id":46220249104606,"sku":"0000000001122","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_black_asa_747123b5-86d6-4274-8a45-504cd740fd7a.jpg?v=1729274273"},{"product_id":"asa-gf-filament-process-blue","title":"ASA-GF Filament - Process Blue","description":"\u003cp\u003e\u003cstrong\u003eProcess Blue ASA-GF filament for stiff, weather-ready functional prints.\u003c\/strong\u003e This Decent spool is ASA-GF: ASA filament with glass-fiber reinforcement. Use it when you want ASA's outdoor-friendly UV\/weather resistance with a stiffer, more dimensional engineering finish than plain ASA.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF over plain ASA?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiffer functional parts:\u003c\/strong\u003e glass fiber reinforcement helps printed brackets, mounts, ducts, and printer parts hold shape better than standard ASA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor-capable base resin:\u003c\/strong\u003e ASA is the ABS-family material people reach for when UV exposure and weather matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess Blue color:\u003c\/strong\u003e a clean blue engineering finish for visible printer parts, fixtures, and outdoor components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF \/ glass-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Process Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e FDM 3D-printer filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished diameter \/ spool weight \/ tolerance:\u003c\/strong\u003e not exposed in the current Shopify record or product photo; verify the package label before quoting those numbers in a print profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle requirement:\u003c\/strong\u003e abrasive filament; use hardened steel, DLC-coated, tungsten carbide, ruby, or another abrasive-ready nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse this for outdoor printer parts, brackets, fixtures, ducts, and functional pieces where stiffness and weather resistance matter. It pairs well with an enclosed ASA-capable printer and a hardened nozzle such as the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6-style nozzle\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eASA prints best in an enclosure with proper ventilation.\u003c\/li\u003e\n\u003cli\u003eGlass-filled filament is abrasive; brass nozzles wear quickly.\u003c\/li\u003e\n\u003cli\u003eThis is an engineering filament, not a beginner PLA substitute.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968491380958,"sku":"0000000007647","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_process_blue_asa.jpg?v=1736954903"},{"product_id":"asa-gf-filament-sky-blue","title":"ASA-GF Filament - Sky Blue","description":"\u003cp\u003e\u003cstrong\u003eSky-blue ASA-GF filament for stiff, weather-ready functional prints.\u003c\/strong\u003e This Decent spool is ASA-GF: ASA filament with glass-fiber reinforcement. Use it when you want ASA's outdoor-friendly UV\/weather resistance with a stiffer, more dimensional engineering finish than plain ASA.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF over plain ASA?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiffer functional parts:\u003c\/strong\u003e glass fiber reinforcement helps printed brackets, mounts, ducts, and printer parts hold shape better than standard ASA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor-capable base resin:\u003c\/strong\u003e ASA is the ABS-family material people reach for when UV exposure and weather matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBright engineering color:\u003c\/strong\u003e Sky Blue gives you a visible, clean part color without moving to a glossy decorative material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF, glass-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Sky Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e sealed filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished diameter \/ spool weight \/ tolerance:\u003c\/strong\u003e not exposed in the current Shopify record or product photo; verify the package label before quoting those numbers in a print profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle requirement:\u003c\/strong\u003e abrasive filament; use hardened steel, DLC-coated, tungsten carbide, ruby, or another abrasive-ready nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVoron-style enclosed-printer parts, brackets, mounts, ducts, and cosmetic-functional accents\u003c\/li\u003e\n\u003cli\u003eOutdoor housings and fixtures where PLA\/PETG are the wrong material class\u003c\/li\u003e\n\u003cli\u003eParts where stiffness and matte fiber texture matter more than a glossy surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint on an ASA-capable setup: enclosed printer, heated bed, appropriate build surface, and ventilation.\u003c\/li\u003e\n\u003cli\u003eDry the spool if you hear popping, see steam at the nozzle, or get unexpected stringing.\u003c\/li\u003e\n\u003cli\u003eDo not run this through a standard brass nozzle unless you are comfortable wearing the nozzle out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus Hardened Steel V6 Style Nozzles\u003c\/a\u003e for a basic abrasive-ready setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC Hardened Steel V6 Style Nozzles\u003c\/a\u003e for a slicker coated option.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/tialsin-coated-tungsten-carbide-nozzle\"\u003eDecent TiAlSiN-Coated Tungsten Carbide Nozzle\u003c\/a\u003e if you want the long-life answer for filled filaments.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/decent-filter-food-obsidian-1kg\"\u003eDecent Filter Food Obsidian\u003c\/a\u003e for Nevermore-compatible carbon filtration in enclosed ASA printers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOther Decent ASA-GF colors\u003c\/h3\u003e\n\u003cp\u003eBuilding a color set? Compare this Sky Blue against \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-process-blue\"\u003eProcess Blue\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-red\"\u003eRed\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-taro-purple\"\u003eTaro Purple\u003c\/a\u003e.\u003c\/p\u003e\n\u003cblockquote\u003eVerified buyer note: “10\/10 for strength… I’m printing masterpieces which I know will live on in the outside world for years to come.”\u003c\/blockquote\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a beginner PLA\/PETG replacement.\u003c\/li\u003e\n\u003cli\u003eNot a brass-nozzle filament.\u003c\/li\u003e\n\u003cli\u003eNot a cosmetic high-gloss material; the fiber fill is there for stiffness and stability.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968494395614,"sku":"0000000007647","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_sky_blue_asa.jpg?v=1736954903"},{"product_id":"asa-gf-filament-purple-af","title":"ASA-GF Filament - Purple AF","description":"\u003cp\u003e\u003cstrong\u003eDecent ASA-GF in Purple AF for stiff, weather-ready functional prints.\u003c\/strong\u003e Glass-fiber-filled ASA is the right pick when you want the UV resistance of ASA with more rigidity than a plain ASA spool.\u003c\/p\u003e\n\u003ch3\u003eWhy this over plain ASA\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-fiber reinforcement\u003c\/strong\u003e helps printed parts feel stiffer and more dimensionally stable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base polymer\u003c\/strong\u003e is a better outdoor choice than ABS when sunlight and weather exposure matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurple AF color\u003c\/strong\u003e gives functional printer parts and shop fixtures a dark purple finish without painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF \/ glass-fiber-filled ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Purple AF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e FDM 3D-printer filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle note:\u003c\/strong\u003e abrasive filament; use a hardened nozzle, not brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse this for outdoor printer parts, brackets, fixtures, and functional pieces where stiffness and weather resistance matter. It pairs well with an enclosed ASA-capable printer and a hardened nozzle such as the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6-style nozzle\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eASA prints best in an enclosure with proper ventilation.\u003c\/li\u003e\n\u003cli\u003eGlass-filled filament is abrasive; brass nozzles wear quickly.\u003c\/li\u003e\n\u003cli\u003eThis is not a flexible or decorative silk filament; it is an engineering filament with visible fiber fill.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968503701726,"sku":"0000000007647","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_purple_af_asa.jpg?v=1736954903"},{"product_id":"asa-gf-filament-red","title":"ASA-GF Filament - Red","description":"\u003cp\u003e\u003cstrong\u003eDecent ASA-GF in red is a glass-fiber reinforced ASA filament for functional parts that need better stiffness, heat tolerance and outdoor durability than everyday PLA or PETG.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base material:\u003c\/strong\u003e picked for UV and weather resistance on outdoor brackets, panels, enclosures and printer parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-fiber reinforcement:\u003c\/strong\u003e adds stiffness and dimensional stability, with a matte textured finish that hides layer lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed color:\u003c\/strong\u003e useful for visible functional parts, accents and color-coded printed hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse an enclosure.\u003c\/strong\u003e ASA is draft-sensitive and should be printed in a ventilated enclosed printer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse a hardened nozzle.\u003c\/strong\u003e GF filament is abrasive and will wear brass nozzles; pair it with a \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ehardened steel nozzle\u003c\/a\u003e, DLC, ruby or tungsten-carbide nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry if needed.\u003c\/strong\u003e If you see popping, steam or excess stringing, dry the spool before tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutdoor functional parts and printer accessories\u003c\/li\u003e\n\u003cli\u003eJigs, brackets, mounts and enclosures\u003c\/li\u003e\n\u003cli\u003eParts where stiffness matters more than glossy cosmetic finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a beginner PLA replacement; tune it like an engineering filament.\u003c\/li\u003e\n\u003cli\u003eNot for brass nozzles unless you accept accelerated wear.\u003c\/li\u003e\n\u003cli\u003eSpecific blend percentage and net filament weight are not stated on the current Decent product record, so do not assume a Phaetus\/Siraya\/Ambrosia profile is exact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available in live sibling colors: \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-white\"\u003eWhite\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-grey\"\u003eGrey\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-green\"\u003eGreen\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-taro-purple\"\u003eTaro Purple\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968505503966,"sku":"0000000007647","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_red_asa.jpg?v=1736954903"},{"product_id":"asa-gf-filament-pink","title":"ASA-GF Filament - Pink","description":"\u003cp\u003e\u003cstrong\u003eDecent ASA-GF in Pink is glass-fiber reinforced ASA filament for stiff, weather-ready functional prints.\u003c\/strong\u003e Use it when a plain ASA part is not rigid enough and a PLA\/PETG part will not hold up outdoors.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF over plain ASA?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiffer functional parts:\u003c\/strong\u003e glass-fiber reinforcement helps reduce flex for brackets, panels, enclosures and printer parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base material:\u003c\/strong\u003e ASA is chosen for UV and weather resistance where parts see sunlight, heat cycles or shop abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePink finish:\u003c\/strong\u003e a visible color option for functional parts, prototypes and printer mods that should stand out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF — glass-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Pink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e 3D-printer filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle note:\u003c\/strong\u003e glass-filled filament is abrasive; use a hardened or wear-resistant nozzle such as the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6-style nozzle\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC hardened steel V6-style nozzle\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest use\u003c\/h3\u003e\n\u003cp\u003ePick this for outdoor brackets, printer mods, panels, mounts and other functional parts where stiffness and weather resistance matter more than easy printing.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eASA-GF is an engineering material, not a beginner PLA substitute; an enclosed, well-controlled printer setup is strongly recommended.\u003c\/li\u003e\n\u003cli\u003eThe glass fiber content will wear brass nozzles quickly.\u003c\/li\u003e\n\u003cli\u003eDry filament and tune your own printer profile before committing to long production prints.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968507306206,"sku":"0000000006387","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_pink_asa.jpg?v=1729274486"},{"product_id":"asa-gf-filament-orange","title":"ASA-GF Filament - Orange","description":"\u003cp\u003e\u003cstrong\u003eDecent ASA-GF in Orange is glass-fiber reinforced ASA filament for stiff, weather-ready functional prints.\u003c\/strong\u003e Use it when a plain ASA part is not rigid enough and a PLA or PETG part will not survive heat, sunlight, or shop abuse.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF over plain ASA?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiffer functional parts:\u003c\/strong\u003e glass-fiber reinforcement helps reduce flex in brackets, panels, mounts, enclosures, and printer parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base material:\u003c\/strong\u003e ASA is used for UV and weather resistance where parts see sunlight, heat cycles, or outdoor service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrange finish:\u003c\/strong\u003e a high-visibility color for functional prints, prototypes, safety-marked parts, and printer mods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF — glass-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament diameter:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpool size:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e 3D-printer filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle note:\u003c\/strong\u003e glass-filled filament is abrasive; use a hardened or wear-resistant nozzle such as the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6-style nozzle\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC hardened steel V6-style nozzle\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest use\u003c\/h3\u003e\n\u003cp\u003ePick this for outdoor brackets, printer mods, panels, mounts, jigs, fixtures, and other functional parts where stiffness and weather resistance matter more than easy printing.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eASA-GF is an engineering filament, not a beginner PLA substitute; an enclosed, well-controlled printer setup is strongly recommended.\u003c\/li\u003e\n\u003cli\u003eThe glass fiber content will wear brass nozzles quickly.\u003c\/li\u003e\n\u003cli\u003eDry filament and tune your own printer profile before committing to long production prints.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968508813534,"sku":"0000000023049","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_orange_asa.jpg?v=1736954903"},{"product_id":"asa-gf-filament-yellow","title":"ASA-GF Filament - Yellow","description":"\u003cp\u003e\u003cstrong\u003eYellow Decent ASA-GF filament for stiff, weather-capable functional prints.\u003c\/strong\u003e ASA-GF is glass-fiber reinforced ASA: a good fit for outdoor brackets, printer parts, fixtures, and enclosure components where UV resistance and added stiffness matter.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base material:\u003c\/strong\u003e chosen for outdoor use where UV and weather exposure matter more than standard ABS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-fiber reinforcement:\u003c\/strong\u003e adds stiffness and a more technical, matte-looking finish compared with plain ASA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow color:\u003c\/strong\u003e useful for visible functional parts, safety-coded fixtures, and accent pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF \/ glass-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e FDM 3D printer filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore shipping weight:\u003c\/strong\u003e 1,580 g package weight recorded in Shopify\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse an enclosed, ASA-capable printer setup and dry the filament if print quality suggests moisture.\u003c\/li\u003e\n\u003cli\u003eBecause glass fiber is abrasive, use a hardened or wear-resistant nozzle, not a standard brass nozzle.\u003c\/li\u003e\n\u003cli\u003eFor wear-resistant nozzle options, see the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus Hardened Steel V6 Style Nozzle\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC Hardened Steel V6 Style Nozzle\u003c\/a\u003e, or \u003ca href=\"https:\/\/dfh.fm\/products\/tialsin-coated-tungsten-carbide-nozzle\"\u003eTiAlSiN Coated Tungsten Carbide Nozzle\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a low-temperature beginner filament; print it like ASA, with heat, ventilation, and enclosure discipline.\u003c\/li\u003e\n\u003cli\u003eNot brass-nozzle friendly for long runs; the glass fiber fill will wear soft nozzles.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968511336670,"sku":"0000000007647","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_yellow_asa.jpg?v=1736954903"},{"product_id":"asa-gf-filament-white","title":"ASA-GF Filament - White","description":"\u003cp\u003e\u003cstrong\u003eWhite Decent ASA-GF filament for functional prints that need ASA weather resistance plus glass-fiber stiffness.\u003c\/strong\u003e Use it for brackets, fixtures, printer parts, outdoor housings, and other FDM parts where regular PLA or PETG is the wrong material.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base material:\u003c\/strong\u003e chosen for UV and weather resistance compared with ABS-style indoor materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-fiber reinforcement:\u003c\/strong\u003e improves stiffness and dimensional stability versus unfilled ASA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite finish:\u003c\/strong\u003e useful for visible functional parts, labels, fixtures, and outdoor pieces where a light color matters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint requirements\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse a hardened or wear-resistant nozzle.\u003c\/strong\u003e Glass-filled filament is abrasive and can wear brass nozzles quickly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse an enclosed printer and heated bed.\u003c\/strong\u003e ASA-family materials print best with controlled chamber temperature and low drafts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep it dry.\u003c\/strong\u003e Store sealed with desiccant and dry before critical prints if extrusion quality drops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits best when\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYou need outdoor-capable functional parts with better stiffness than standard ASA.\u003c\/li\u003e\n\u003cli\u003eYou are printing Voron-style printer parts, shop fixtures, jigs, brackets, or enclosure hardware.\u003c\/li\u003e\n\u003cli\u003eYou already have abrasion-ready tooling, such as the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6-style nozzle\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated Decent ASA-GF colors\u003c\/h3\u003e\n\u003cp\u003eBuilding a color-coded parts set? Compare this white spool with live sibling colors: \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-green\"\u003eGreen\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-red\"\u003eRed\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-pink\"\u003ePink\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-orange\"\u003eOrange\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a beginner PLA replacement; ASA-GF needs more heat control and ventilation.\u003c\/li\u003e\n\u003cli\u003eNot brass-nozzle friendly; plan on hardened steel, tungsten carbide, ruby, or another wear-resistant nozzle.\u003c\/li\u003e\n\u003cli\u003eNo GTIN, fiber percentage, diameter, net spool weight, or country of origin is claimed here unless shown in the product record or supplier paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968512614622,"sku":"0000000007647","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_white_asa.jpg?v=1736954903"},{"product_id":"asa-gf-filament-grey","title":"ASA-GF Filament - Grey","description":"\u003cp\u003e\u003cstrong\u003eGrey Decent ASA-GF filament for functional prints that need ASA weather resistance plus glass-fiber stiffness.\u003c\/strong\u003e Use it for brackets, mounts, printer parts, outdoor housings, fixtures, and other FDM parts where regular PLA or PETG is the wrong material class.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base material:\u003c\/strong\u003e chosen for UV and weather resistance compared with ABS-style indoor materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-fiber reinforcement:\u003c\/strong\u003e improves stiffness and dimensional stability versus unfilled ASA, with a matte fiber finish that helps hide layer lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrey finish:\u003c\/strong\u003e a neutral engineering color for visible functional parts, fixtures, and printer hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF, glass-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e sealed filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle requirement:\u003c\/strong\u003e abrasive filament; use hardened steel, DLC-coated, tungsten carbide, ruby, or another abrasive-ready nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter, fiber percentage, tolerance, and net filament weight:\u003c\/strong\u003e not exposed in the current Decent product record or product photo; verify the package label before quoting those numbers in a print profile.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint requirements\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse an enclosed printer and heated bed.\u003c\/strong\u003e ASA-family materials print best with controlled chamber temperature and low drafts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate the printer area.\u003c\/strong\u003e Treat ASA-GF like an engineering filament, not a beginner PLA replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep it dry.\u003c\/strong\u003e Store sealed with desiccant and dry before critical prints if extrusion quality drops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus Hardened Steel V6 Style 1.75mm Nozzles\u003c\/a\u003e for an abrasive-ready nozzle setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-white\"\u003eWhite\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-green\"\u003eGreen\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-red\"\u003eRed\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-taro-purple\"\u003eTaro Purple\u003c\/a\u003e Decent ASA-GF if you are building a color-coded parts set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot brass-nozzle friendly; plan on hardened steel, tungsten carbide, ruby, or another wear-resistant nozzle.\u003c\/li\u003e\n\u003cli\u003eNot a drop-in PLA\/PETG profile; ASA-GF needs more heat control, ventilation, and drying discipline.\u003c\/li\u003e\n\u003cli\u003eNo GTIN, country of origin, or exact blend percentage is claimed here unless shown in the product record or supplier paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968514187486,"sku":"0000000032020","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_grey_asa.jpg?v=1736954894"},{"product_id":"asa-gf-filament-green","title":"ASA-GF Filament - Green","description":"\u003cp\u003e\u003cstrong\u003eGreen ASA-GF filament for stiff, weather-ready functional prints.\u003c\/strong\u003e This Decent spool is ASA-GF: ASA filament with glass-fiber reinforcement. Use it when you want ASA's outdoor-friendly UV\/weather resistance with a stiffer, more dimensional engineering finish than plain ASA.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF over plain ASA?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiffer functional parts:\u003c\/strong\u003e glass fiber reinforcement helps printed brackets, mounts, ducts, and printer parts hold shape better than standard ASA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor-capable base resin:\u003c\/strong\u003e ASA is the ABS-family material people reach for when UV exposure and weather matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBright green engineering color:\u003c\/strong\u003e Green gives visible part contrast without moving to a decorative PLA-style material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF, glass-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e sealed filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished diameter \/ net filament weight \/ tolerance:\u003c\/strong\u003e not exposed in the current Shopify record or product photo; verify the package label before quoting those numbers in a print profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle requirement:\u003c\/strong\u003e abrasive filament; use hardened steel, DLC-coated, tungsten carbide, ruby, or another abrasive-ready nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVoron-style enclosed-printer parts, brackets, mounts, ducts, and cosmetic-functional accents\u003c\/li\u003e\n\u003cli\u003eOutdoor housings and fixtures where PLA\/PETG are the wrong material class\u003c\/li\u003e\n\u003cli\u003eParts where stiffness and matte fiber texture matter more than a glossy surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint on an ASA-capable setup: enclosed printer, heated bed, appropriate build surface, and ventilation.\u003c\/li\u003e\n\u003cli\u003eDry the spool if you hear popping, see steam at the nozzle, or get unexpected stringing.\u003c\/li\u003e\n\u003cli\u003eDo not run this through a standard brass nozzle unless you are comfortable wearing the nozzle out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus Hardened Steel V6 Style Nozzles\u003c\/a\u003e for a basic abrasive-ready setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC Hardened Steel V6 Style Nozzles\u003c\/a\u003e for a slicker coated option.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/tialsin-coated-tungsten-carbide-nozzle\"\u003eDecent TiAlSiN-Coated Tungsten Carbide Nozzle\u003c\/a\u003e if you want the long-life answer for filled filaments.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/decent-filter-food-obsidian-1kg\"\u003eDecent Filter Food Obsidian\u003c\/a\u003e for Nevermore-compatible carbon filtration in enclosed ASA printers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOther Decent ASA-GF colors\u003c\/h3\u003e\n\u003cp\u003eBuilding a color set? Compare this Green against \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-sky-blue\"\u003eSky Blue\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-process-blue\"\u003eProcess Blue\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-red\"\u003eRed\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/asa-gf-filament-taro-purple\"\u003eTaro Purple\u003c\/a\u003e.\u003c\/p\u003e\n\u003cblockquote\u003eVerified buyer note on Decent ASA-GF: “10\/10 for strength… I’m printing masterpieces which I know will live on in the outside world for years to come.”\u003c\/blockquote\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a beginner PLA\/PETG replacement.\u003c\/li\u003e\n\u003cli\u003eNot a brass-nozzle filament.\u003c\/li\u003e\n\u003cli\u003eNot a cosmetic high-gloss material; the fiber fill is there for stiffness and stability.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":45968518676702,"sku":"0000000028815","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/decent_grass_green_asa.jpg?v=1736954903"},{"product_id":"asa-gf-filament-taro-purple","title":"ASA-GF Filament - Taro Purple","description":"\u003cp\u003e\u003cstrong\u003eDecent ASA-GF in Taro Purple is glass-fiber reinforced ASA filament for stiff, weather-ready functional prints.\u003c\/strong\u003e Use it when a plain ASA part is not rigid enough and a PLA\/PETG part will not hold up outdoors.\u003c\/p\u003e\n\u003ch3\u003eWhy choose ASA-GF over plain ASA?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiffer functional parts:\u003c\/strong\u003e glass-fiber reinforcement helps reduce flex for brackets, panels, enclosures and printer parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA base material:\u003c\/strong\u003e ASA is chosen for UV and weather resistance where parts see sunlight, heat cycles or shop abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaro Purple finish:\u003c\/strong\u003e a muted purple option for visible functional parts that should look intentional, not temporary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Decent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA-GF — glass-fiber reinforced ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Taro Purple\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e 3D-printer filament spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle note:\u003c\/strong\u003e glass-filled filament is abrasive; use a hardened or wear-resistant nozzle such as the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6-style nozzle\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC hardened steel V6-style nozzle\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest use\u003c\/h3\u003e\n\u003cp\u003ePick this for outdoor brackets, printer mods, panels, mounts and other functional parts where stiffness and weather resistance matter more than easy printing.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eASA-GF is an engineering material, not a beginner PLA substitute; an enclosed, well-controlled printer setup is strongly recommended.\u003c\/li\u003e\n\u003cli\u003eThe glass fiber content will wear brass nozzles quickly.\u003c\/li\u003e\n\u003cli\u003eDry filament and tune your own printer profile before committing to long production prints.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Decent","offers":[{"title":"Default Title","offer_id":46210947317982,"sku":null,"price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/ABS_GF_Filament_Purple.jpg?v=1736954903"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/collections\/image_117cf040-2903-4bdc-b264-921e294c7797.jpg?v=1712636876","url":"https:\/\/formosissima.myshopify.com\/collections\/filament.oembed?page=2","provider":"dfh.fm","version":"1.0","type":"link"}