{"title":"Lighting","description":"","products":[{"product_id":"voron-stealthburner-fastener-and-led-kit","title":"Voron Stealthburner Fastener and LED Kit","description":"\u003cp\u003e\u003cstrong\u003eSmall Stealthburner hardware-and-lighting pack for finishing the Voron toolhead.\u003c\/strong\u003e This kit bundles the long M3 fasteners, LED buttons, heat-set inserts, magnet, and fine FEP wire used around the Voron Stealthburner face and lighting area.\u003c\/p\u003e\n\u003ch3\u003eWhy this kit exists\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePulls the easy-to-miss Stealthburner lighting and face hardware into one bag instead of forcing a separate fastener and LED hunt.\u003c\/li\u003e\n\u003cli\u003eIncludes \u003cstrong\u003e3 RGBW LED buttons\u003c\/strong\u003e for Stealthburner illumination plus \u003cstrong\u003e30 AWG FEP wire\u003c\/strong\u003e for the low-current LED run.\u003c\/li\u003e\n\u003cli\u003ePairs with printed Stealthburner light parts such as the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-clear-led-cover\"\u003eclear LED cover\u003c\/a\u003e and \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-led-diffuser-mask\"\u003eLED diffuser mask\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3× M3x50 SHCS\u003c\/strong\u003e, fully threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2× M3x25 SHCS\u003c\/strong\u003e, fully threaded\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2× M3x6 FHCS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2× M3 threaded inserts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1× 6 mm × 3 mm round magnet\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3× RGBW LED buttons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e915 mm\u003c\/strong\u003e of \u003cstrong\u003e30 AWG FEP wire\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor Voron Stealthburner toolhead builds and refreshes. Voron’s official Stealthburner sourcing guide lists the underlying part families used here, including M3 socket-head and flat-head fasteners, NeoPixel RGBW mini button PCBs, a 6×3 mm magnet, and 30 AWG PTFE\/FEP-style wiring.\u003c\/p\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is not a full Stealthburner kit, Clockwork 2 extruder kit, hotend kit, fan kit, or printed-parts set.\u003c\/li\u003e\n\u003cli\u003eFor the Rainbow Barf logo PCB bundle, use the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit-rainbow-barf-edition\"\u003eRainbow Barf Edition\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42380311560414,"sku":"4763763661","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0704.png?v=1642908965"},{"product_id":"rainbow-barf-led-pcb-by-whoppingpochard-and-vinnycordeiro","title":"Rainbow Barf LED PCB by Lightweight Labware and vinnycordeiro","description":"\u003cp\u003e\u003cstrong\u003eAddressable Voron logo lighting for StealthBurner.\u003c\/strong\u003e The Rainbow Barf Logo LED is a compact PCB from Lightweight Labware \/ whoppingpochard and vinnycordeiro with \u003cstrong\u003eeight WS2812B-2020 protocol-compatible RGB LEDs\u003c\/strong\u003e arranged to line up with the Voron StealthBurner logo cutout.\u003c\/p\u003e\n\u003ch3\u003eWhy use Rainbow Barf instead of a single logo LED?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight independently addressable LEDs\u003c\/strong\u003e let each section of the logo animate separately instead of glowing as one block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStealthBurner-specific layout\u003c\/strong\u003e matches the Voron logo window and fits the special printed carrier\/diffuser from the project files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKlipper-friendly\u003c\/strong\u003e: the official project points to Klipper LED Effect examples for logo animations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProject: \u003ca href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/LEDs\/Rainbow_Barf_Logo_LED\"\u003eRainbow Barf Logo LED for StealthBurner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLEDs: \u003cstrong\u003e8× WS2812B-2020\u003c\/strong\u003e addressable RGB LEDs, LCSC C965555\u003c\/li\u003e\n\u003cli\u003ePassive parts from the official BOM: \u003cstrong\u003e100 nF 0402 capacitor\u003c\/strong\u003e and \u003cstrong\u003e470 Ω 0402 resistor\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for the Voron \u003cstrong\u003eStealthBurner\u003c\/strong\u003e logo diffuser\/carrier assembly\u003c\/li\u003e\n\u003cli\u003eApproximate board class: about the size of a single 5050 WS2812 NeoPixel PCB, per the project documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and installation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse with a Voron StealthBurner toolhead and the project’s printed carrier and diffuser.\u003c\/li\u003e\n\u003cli\u003eFor a bundled install path, see the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit-rainbow-barf-edition\"\u003eVoron StealthBurner Fastener and LED Kit: Rainbow Barf Edition\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor fine toolhead wiring, pair it with \u003ca href=\"https:\/\/dfh.fm\/products\/30awg-stranded-fep-wire-x-10m\"\u003e30AWG stranded FEP wire\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis listing is for the Rainbow Barf LED PCB only; printed carrier\/diffuser parts and wiring are not included unless explicitly shown in your order.\u003c\/li\u003e\n\u003cli\u003eIt is not a drop-in replacement for every StealthBurner LED setup without soldering and Klipper configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Many LED, such wow!”\u003c\/blockquote\u003e","brand":"Lightweight Labware","offers":[{"title":"Default Title","offer_id":42495893733598,"sku":"7956583636","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0931_a2f797b5-f7d8-42e4-8dba-7d97b9a07209.png?v=1645672301"},{"product_id":"voron-v0-rgb-side-panels","title":"Voron V0 RGB Side Panels","description":"\u003ch4\u003eVoron V0 RGB Side Panels*\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003ePackage includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e36 WS2812B-B SMD LED's\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/chemcast.com.mx\/optik.html\" alt=\"Chemcast LED panels\"\u003eChemcast Black and LED Panels\u003c\/a\u003e, left and right\u003c\/li\u003e\n\u003cli\u003ePCB LED panels, left and right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csmall\u003e* By \u003ca href=\"https:\/\/github.com\/timmit99\/Voron_Zero_RGB_Side_Panels\" alt=\"timmit rgb panel github\" taarget=\"_blank\"\u003etimmit\u003c\/a\u003e, to whom I will be donating 5% of the profit from the panels.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly 25 sets \u003c\/strong\u003e\u003cb\u003eavailable. \u003c\/b\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42724310286558,"sku":"2751722534","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/1E88199E-A505-4986-BB09-F7239206A971_1_105_c.jpg?v=1650626207"},{"product_id":"daylight-on-a-stick-by-bartlammers","title":"Daylight on a Stick - by bartlammers","description":"\u003cp\u003eGrab your wallet and your sunglasses. Here's Daylight on a Stick by \u003ca title=\"bartlammers github link\" href=\"https:\/\/github.com\/bartlammers\" target=\"_blank\"\u003ebartlammers,\u003c\/a\u003e AKA \u003cspan data-mce-fragment=\"1\" class=\"username-3JLfHz headerTagUsernameBase-XYisdh\"\u003eBlamm\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"discrimBase-1VOoau\"\u003e#8891*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e18 x bright AF LEDs on a chainable board, to simulate daylight inside your Voron.\u003c\/p\u003e\n\u003cp\u003eMore information can be found \u003ca title=\"link to voron DAYLIGHT GITHUB\" href=\"https:\/\/github.com\/VoronDesign\/Voron-Hardware\/tree\/master\/Daylight\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e* As always, a percentage of sales will go back to the creator.\u003c\/small\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Black","offer_id":43155177308382,"sku":"8890442231","price":14.99,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":43155177341150,"sku":"8890442232","price":14.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":43155177373918,"sku":"8890442233","price":14.99,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":43155177406686,"sku":"8890442234","price":14.99,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":43155177472222,"sku":"8890442235","price":14.99,"currency_code":"USD","in_stock":false},{"title":"Purple","offer_id":43155177570526,"sku":"8890442236","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled19_ed67b4d6-2b80-4f1d-8e4d-9b23a91b688f.jpg?v=1652405058"},{"product_id":"nightlight-on-a-stick-by-bartlammers","title":"Nightlight on a Stick - by bartlammers","description":"\u003cp\u003e30x UV LED stick\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42935163420894,"sku":"8691289818","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled47.jpg?v=1654892401"},{"product_id":"voron-stealthburner-clear-led-cover","title":"Voron Stealthburner Clear LED Cover","description":"\u003cp\u003e\u003cstrong\u003eClear PETG Stealthburner LED diffuser for the front Voron logo.\u003c\/strong\u003e This is the clear printed cover\/diffuser for the standard Voron Stealthburner LED opening, grounded to the official Voron file \u003cstrong\u003e[c]_stealthburner_LED_diffuser.stl\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy use this piece\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear PETG\u003c\/strong\u003e lets the logo lighting show through while diffusing the LED hotspots.\u003c\/li\u003e\n  \u003cli\u003eMatches the official Voron Stealthburner printed-part geometry for the LED diffuser position.\u003c\/li\u003e\n  \u003cli\u003eUseful as a spare if your original diffuser is scratched, cloudy, or missing during a toolhead build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePart: Stealthburner LED diffuser \/ clear LED cover\u003c\/li\u003e\n  \u003cli\u003eMaterial: \u003cstrong\u003eclear PETG\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eOfficial Voron reference: \u003cstrong\u003e[c]_stealthburner_LED_diffuser.stl\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eQuantity: \u003cstrong\u003e1\u003c\/strong\u003e clear diffuser cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor Voron printers using the Stealthburner toolhead. Pair it with the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-led-diffuser-mask\"\u003eVoron Stealthburner LED Diffuser Mask\u003c\/a\u003e and a Stealthburner LED kit such as the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit\"\u003eVoron Stealthburner Fastener and LED Kit\u003c\/a\u003e when you are building the complete logo-light assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNot the LED carrier, diffuser mask, PCB, LEDs, screws, or wiring.\u003c\/li\u003e\n  \u003cli\u003eNot an SLA resin diffuser; this one is printed in clear PETG.\u003c\/li\u003e\n  \u003cli\u003eNot a complete Stealthburner toolhead kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Perfect drop in” — verified buyer review\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43089940578526,"sku":"7728948130","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/shot_20220710084116_5147ded5-04a1-48ed-a887-fb7850bd3548.jpg?v=1657515774"},{"product_id":"voron-stealthburner-fastener-and-led-kit-rainbow-barf-edition","title":"Voron Stealthburner Fastener and LED Kit: Rainbow Barf Edition","description":"\u003cul\u003e\n\u003cli\u003eVoron Stealthburner Fastener and LED Kit:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eM3x50 SHCS (fully threaded) x 3\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eM3x25 SHCS (fully threaded) x 2\u003c\/li\u003e\n\u003cli\u003eM3x6 FHCS x 2\u003c\/li\u003e\n\u003cli\u003eM3 Threaded inserts x 2\u003c\/li\u003e\n\u003cli\u003e6mm x 3mm Round magnet x 1\u003c\/li\u003e\n\u003cli\u003eRGB LED x 3\u003c\/li\u003e\n\u003cli\u003eRGBW LED x 3\u003c\/li\u003e\n\u003cli\u003e30awg FEP 915mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRainbow Barf LED PCB by Lightweight Labware and vinnycordeiro\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43166397530334,"sku":"6607295008","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0704_540x_a9e6c959-d669-4c0c-9f76-ffb73c2ad425.png?v=1658673381"},{"product_id":"disco-stick","title":"Disco Stick","description":"\u003cp\u003e\u003cstrong\u003eDisco Stick is an 18-LED addressable RGB light bar for adding controllable color lighting inside a Voron or other enclosed 3D printer.\u003c\/strong\u003e It is the big-stick size from Bartlammers’ open-source Daylight\/Disco stick family: a 5V RGB PCB using 5050 addressable LEDs such as WS2812B\/SK6812, with a Klipper \u003ccode\u003echain_length\u003c\/code\u003e of \u003cstrong\u003e18\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy use this over a plain white light bar?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddressable RGB control:\u003c\/strong\u003e wire it to a controller RGB\/NeoPixel output and drive status colors, print-state lighting, or effects from Klipper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinter-friendly format:\u003c\/strong\u003e the stick form factor is meant to mount along printer extrusion using the open-source Daylight\/Disco bracket ecosystem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo PCB color options:\u003c\/strong\u003e choose Black or Red to match the build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: addressable RGB LED stick PCB\u003c\/li\u003e\n\u003cli\u003eLED count: \u003cstrong\u003e18\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput: \u003cstrong\u003e5V\u003c\/strong\u003e RGB\/NeoPixel-style data control\u003c\/li\u003e\n\u003cli\u003eLED family: 4-pin 5050 addressable RGB LEDs such as WS2812B \/ SK6812\u003c\/li\u003e\n\u003cli\u003eKlipper configuration: set NeoPixel \u003ccode\u003echain_length\u003c\/code\u003e to \u003cstrong\u003e18\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB color variants: Black, Red\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and setup notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the Daylight\/Disco on a Stick mounting ecosystem used on Voron-style 2020 and 1515 extrusion frames.\u003c\/li\u003e\n\u003cli\u003eUse the official Daylight\/Disco STL brackets from the Voron Hardware project for mounting.\u003c\/li\u003e\n\u003cli\u003eFor a white-light alternative, see \u003ca href=\"https:\/\/dfh.fm\/products\/daylight-on-a-stick-by-bartlammers\"\u003eDaylight on a Stick\u003c\/a\u003e; for UV\/accent lighting, see \u003ca href=\"https:\/\/dfh.fm\/products\/nightlight-on-a-stick-by-bartlammers\"\u003eNightlight on a Stick\u003c\/a\u003e; for larger 350mm-class printers, see \u003ca href=\"https:\/\/dfh.fm\/products\/disco-stick-xxl-by-lab4450\"\u003eDisco Stick XXL\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a 24V white Daylight stick; this is the 5V RGB Disco version.\u003c\/li\u003e\n\u003cli\u003eNot a standalone lighting kit with printed brackets, wiring harness, or controller configuration included.\u003c\/li\u003e\n\u003cli\u003eDo not daisy-chain power through long runs; plan power injection\/current capacity for multiple sticks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Black","offer_id":43340754976990,"sku":"5665507086","price":16.5,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":43340755042526,"sku":"5665507087","price":16.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled67.jpg?v=1660806103"},{"product_id":"voron-v0-kirigami-bed-wiring-and-led-kit","title":"Voron V0 Kirigami Bed Wiring and LED Kit","description":"\u003cp\u003e\u003cstrong\u003eLDO Kirigami bed wiring and LED hardware for Voron V0.\u003c\/strong\u003e This kit collects the small electronics that make a Kirigami bed install cleaner: the LDO Neopixel\/front LED PCB, the Kirigami breakout\/splicer PCB, the breakout wire kit, and two WAGO 221-412 lever connectors.\u003c\/p\u003e\n\u003ch3\u003eWhy this kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatches the LDO Kirigami wiring path documented for Voron V0\/V0.2 builds.\u003c\/li\u003e\n\u003cli\u003eAdds the front Neopixel\/status light hardware used with the Kirigami bed front and diffuser.\u003c\/li\u003e\n\u003cli\u003eUses WAGO 221-412 connectors for serviceable bed-heater wiring at the carriage.\u003c\/li\u003e\n\u003cli\u003eKeeps the bed wiring modular, so the heated bed can be installed or removed without reworking the full printer harness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLDO Kirigami LED \/ Neopixel PCB\u003c\/li\u003e\n\u003cli\u003eLDO Kirigami breakout \/ splicer PCB\u003c\/li\u003e\n\u003cli\u003eLDO breakout wire kit\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/wago-221-412\"\u003eWAGO 221-412\u003c\/a\u003e lever connectors x2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor Voron V0 builds using a Kirigami bed setup, including the \u003ca href=\"https:\/\/dfh.fm\/products\/kirigami-beds\"\u003eKirigami Beds by Christoph Mueller\u003c\/a\u003e. LDO's V0.2 documentation identifies the Kirigami bed wiring path, bed Neopixel cable, thermistor cable, and heater cable routing through the bed cable chain.\u003c\/p\u003e\n\u003ch3\u003eInstall notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor the Neopixel cable, LDO documents red as 5V, white as DATA, and black as GND.\u003c\/li\u003e\n\u003cli\u003eThe WAGO connectors are for bed-heater lead splicing; always verify polarity, insulation, and strain relief before powering the printer.\u003c\/li\u003e\n\u003cli\u003eThis is the wiring \/ LED electronics kit only. It does not include the Kirigami metal bed carriage, heated bed, printed front body, diffuser, or full printer harness.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":43365267472606,"sku":"8640412493","price":12.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_2938.jpg?v=1662457036"},{"product_id":"voron-stealthburner-led-diffuser-mask","title":"Voron Stealthburner LED Diffuser Mask","description":"\u003cp\u003e\u003cstrong\u003eBlack printed LED diffuser mask for the Voron Stealthburner toolhead.\u003c\/strong\u003e This is the outer mask piece that frames the Stealthburner LED diffuser area; Voron publishes it as \u003ccode\u003e[o]_stealthburner_LED_diffuser_mask.stl\u003c\/code\u003e in the official Stealthburner STL set.\u003c\/p\u003e\n\u003ch3\u003eWhy use this part\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrop-in replacement for the Stealthburner LED diffuser mask position.\u003c\/li\u003e\n\u003cli\u003eClean black frame around the diffuser openings so the lit area stays defined.\u003c\/li\u003e\n\u003cli\u003eUseful when finishing a Stealthburner build or replacing a marked, warped, or mismatched printed mask.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProject:\u003c\/strong\u003e Voron Stealthburner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOfficial source file:\u003c\/strong\u003e \u003ccode\u003e[o]_stealthburner_LED_diffuser_mask.stl\u003c\/code\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e one printed LED diffuser mask\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairing\u003c\/h3\u003e\n\u003cp\u003ePair it with the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-clear-led-cover\"\u003eVoron Stealthburner Clear LED Cover\u003c\/a\u003e and a Stealthburner LED hardware option such as the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit\"\u003eVoron Stealthburner Fastener and LED Kit\u003c\/a\u003e when you are building out the lit toolhead face.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot the clear diffuser\/cover.\u003c\/li\u003e\n\u003cli\u003eNot the LED carrier.\u003c\/li\u003e\n\u003cli\u003eDoes not include LEDs, fasteners, wiring, or the Stealthburner toolhead.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Black","offer_id":43559058702558,"sku":"6954771753","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_326952.jpg?v=1666416568"},{"product_id":"nightlight-on-a-stick-xxl","title":"Nightlight on a Stick XXL - by Lab4450","description":"\u003cp\u003e\u003cstrong\u003e370mm UV LED light stick for large Voron-style printer enclosures.\u003c\/strong\u003e Nightlight on a Stick XXL is the UV version of the open-source Daylight-on-a-Stick family, built as a long PCB light bar for 350mm-and-larger machines.\u003c\/p\u003e\n\u003ch3\u003eWhy pick the Nightlight XXL\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV effect lighting:\u003c\/strong\u003e uses UV LEDs rather than white daylight LEDs, useful for fluorescent\/reactive printed parts and enclosure accent lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXXL length:\u003c\/strong\u003e vendor documentation lists the XXL version at \u003cstrong\u003e370mm\u003c\/strong\u003e, sized for 350mm+ printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-board install:\u003c\/strong\u003e listing is for \u003cstrong\u003e1 assembled PCB\u003c\/strong\u003e; many builders use two, one per side, for more even enclosure coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProduct: \u003cstrong\u003eNightlight on a Stick XXL\u003c\/strong\u003e by Lab4450 \/ Blamm\u003c\/li\u003e\n\u003cli\u003eLighting: \u003cstrong\u003eUV LED PCB stick\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLength: \u003cstrong\u003e370mm XXL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDFH inventory note: \u003cstrong\u003e30x UV LED stick\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounting ecosystem: Daylight-on-a-Stick \/ Voron-Hardware printed brackets for 2020 extrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntended for Voron V2.4, Trident, and other enclosed printers around \u003cstrong\u003e350mm+\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eFor the white-light sibling, see \u003ca href=\"https:\/\/dfh.fm\/products\/daylight-on-a-stick-xxl\"\u003eDaylight on a Stick XXL\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor addressable RGB lighting, see \u003ca href=\"https:\/\/dfh.fm\/products\/disco-stick-xxl-by-lab4450\"\u003eDisco Stick XXL\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eIf your install needs signal cleanup, pair with the \u003ca href=\"https:\/\/dfh.fm\/products\/neopixel-disco-stick-resistor-board\"\u003eNeopixel\/Disco Stick Resistor Board\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the \u003cstrong\u003eUV Nightlight\u003c\/strong\u003e version, not the white Daylight strip and not the RGB Disco strip.\u003c\/li\u003e\n\u003cli\u003eThis is a PCB light stick only; printed mounts, wiring, controller configuration, and power planning are installer responsibilities.\u003c\/li\u003e\n\u003cli\u003eUV light is for effects and inspection, not accurate print-color viewing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“On V2.4 300, it fits perfectly on the front-inside of the machine between the two front z-idlers.”\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43772008431838,"sku":"1244256219","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/daylight_and_nightlight_on_a_stick_xxl.jpg?v=1671357882"},{"product_id":"daylight-on-a-stick-xxl","title":"Daylight on a Stick XXL - by Lab4450","description":"\u003cp\u003e\u003cstrong\u003eHigh-brightness 24V daylight LED bar for large Voron-style enclosed printers.\u003c\/strong\u003e Daylight on a Stick XXL is the 370mm white-light version by Lab4450, built for 350mm-and-larger machines where the standard stick does not span enough frame.\u003c\/p\u003e\n\u003ch3\u003eWhy this over a generic LED strip\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural white 4000K light\u003c\/strong\u003e gives print colors a daylight-like look inside the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXXL 370mm PCB format\u003c\/strong\u003e fits large-frame printers such as Voron V2.4 350 and Trident 350 builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24V direct drive\u003c\/strong\u003e can be wired to a suitable 24V output or controlled from a spare heater\/fan output with PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChainable design\u003c\/strong\u003e keeps wiring cleaner than loose adhesive LED tape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVariant: \u003cstrong\u003eDaylight on a Stick XXL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaker\/design family: \u003cstrong\u003eLab4450 \/ Blamm Daylight\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLength: \u003cstrong\u003e370mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLEDs: \u003cstrong\u003e30 white daylight LEDs\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput: \u003cstrong\u003e24V DC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLight color: \u003cstrong\u003e4000K natural white\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse case: enclosure lighting for \u003cstrong\u003e350mm and larger 3D printers\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and related options\u003c\/h3\u003e\n\u003cp\u003eUse this XXL daylight bar for large Voron V2.4 or Trident-style printers. For the smaller white-light bar, see \u003ca href=\"https:\/\/dfh.fm\/products\/daylight-on-a-stick-by-bartlammers\"\u003eDaylight on a Stick\u003c\/a\u003e. If you need a UV\/nightlight variant, see \u003ca href=\"https:\/\/dfh.fm\/products\/nightlight-on-a-stick-xxl\"\u003eNightlight on a Stick XXL\u003c\/a\u003e; if you need addressable RGB instead of fixed white light, see \u003ca href=\"https:\/\/dfh.fm\/products\/disco-stick-xxl-by-lab4450\"\u003eDisco Stick XXL\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot an RGB\/NeoPixel stick; choose Disco Stick XXL for addressable color.\u003c\/li\u003e\n\u003cli\u003eNot the shorter 270mm Daylight on a Stick.\u003c\/li\u003e\n\u003cli\u003eMounts, wire, controller outputs, and printed brackets are not included unless shown separately in the product options.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43772017606878,"sku":"4285139007","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/daylight_and_nightlight_on_a_stick_xxl_79315d6c-6152-4187-bda4-146ec175b3a8.jpg?v=1671357984"},{"product_id":"stepstick-neopixel-board-by-timmit99","title":"Stepstick Neopixel Board by timmit99","description":"\u003cp\u003eThis board converts the logic level STEP and DIR outputs on a Stepstick header to 5V level for properly driving 2 Neopixel strips. Input 5V from a 2-pin JST-XH header, with 2 outputs on 3-pin JST-XH headers.\u003c\/p\u003e\n\u003cp\u003eMore info may be found in the \u003ca title=\"stepkick neopixel by timmit99\" href=\"https:\/\/github.com\/timmit99\/Stepstick_Neopixel_Board\" target=\"_blank\"\u003erepo\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43887976775902,"sku":"7778726431","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Overview2.jpg?v=1673583284"},{"product_id":"disco-stick-xxl-by-lab4450","title":"Disco Stick XXL - by Lab4450","description":"\u003cp\u003e\u003cstrong\u003eAddressable RGB lighting for big enclosed printers.\u003c\/strong\u003e Disco Stick XXL is a Lab4450 5V WS2812-style RGB LED PCB with \u003cstrong\u003e30 addressable LEDs\u003c\/strong\u003e on an XXL-length stick for 350mm-class and larger 3D printers.\u003c\/p\u003e\n\u003ch3\u003eWhy use this over a plain light bar?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatus-color ready:\u003c\/strong\u003e use RGB effects for print state, alerts, idle lighting, or enclosure accent light.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eXXL printer fit:\u003c\/strong\u003e the 370mm-class stick is intended for larger machines such as Voron V2.4 and Trident 350 builds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClean PCB format:\u003c\/strong\u003e mounts like the Daylight-on-a-Stick family instead of loose LED tape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMaker: \u003cstrong\u003eLab4450\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eLED type: \u003cstrong\u003e5V addressable RGB \/ WS2812-style\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eLED count: \u003cstrong\u003e30 RGB LEDs\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eLength class: \u003cstrong\u003eXXL \/ about 370mm\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eSignal wiring: \u003cstrong\u003e5V, ground, and data-in\u003c\/strong\u003e; add data-out for chaining signal to another stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairing\u003c\/h3\u003e\n\u003cp\u003eUse this for color\/effect lighting in 350mm+ enclosed printers, especially Voron V2.4 and Trident builds. If you want a non-RGB white work light instead, use \u003ca href=\"https:\/\/dfh.fm\/products\/daylight-on-a-stick-xxl\"\u003eDaylight on a Stick XXL\u003c\/a\u003e; for UV-reactive accent lighting, use \u003ca href=\"https:\/\/dfh.fm\/products\/nightlight-on-a-stick-xxl\"\u003eNightlight on a Stick XXL\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a \u003cstrong\u003e5V RGB LED stick\u003c\/strong\u003e, not a 24V daylight strip. Check your controller RGB output and 5V current budget before installing.\u003c\/li\u003e\n  \u003cli\u003eSignal can be chained, but do not assume the PCB can carry power for a long daisy chain; inject power appropriately for multiple sticks.\u003c\/li\u003e\n  \u003cli\u003eMounting hardware, printed brackets, wiring, and controller configuration are not included unless shown in your order.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43894816932062,"sku":"9140919787","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/daylight_and_nightlight_on_a_stick_xxl_5b0f773d-ba16-48e8-9482-adbbace0d8a8.jpg?v=1673755951"},{"product_id":"rgb-led-push-button-switches","title":"RGB LED Push Button Switches","description":"\u003cp\u003eRGB LED push button elevator style switches.\u003c\/p\u003e\n\u003cp\u003e16mm: Printers for Ants, Salad Fork or Micron branded.\u003c\/p\u003e\n\u003cp\u003e22mm: Voron branded. On hold \u003c\/p\u003e\n\u003cp\u003e24v capable. Just run a wire between the power supply and the switch. No hacks required. Just a Wago, or similar\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"16mm \/ Printers For Ants","offer_id":43913253159134,"sku":"5659406487","price":18.5,"currency_code":"USD","in_stock":true},{"title":"16mm \/ Salad Fork","offer_id":43913244770526,"sku":"4176823662","price":18.5,"currency_code":"USD","in_stock":true},{"title":"16mm \/ Micron","offer_id":43913244737758,"sku":"2800483334","price":18.5,"currency_code":"USD","in_stock":true},{"title":"22mm \/ Voron","offer_id":43913244704990,"sku":"8382222873","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/printers_for_ants_micron_voron_v0_salad_fork_led_power_button.jpg?v=1674203456"},{"product_id":"disco-on-a-skirt-by-dfdye-aka-dr-dave","title":"Disco on a Skirt by Dfdye, AKA Dr. Dave","description":"\u003cp\u003eTaken from the \u003ca title=\"dr dave's magical disco skirt led things\" href=\"https:\/\/github.com\/Dfdye\/Voron_Mods\/tree\/main\/Disco_on_a_Skirt_RC1\" target=\"_blank\"\u003erepo\u003c\/a\u003e:\u003c\/p\u003e\n\u003cp\u003eThis is a silly board that does RGB lights. It's absurdly simple, so I didn't spend \u003cspan style=\"text-decoration: line-through;\"\u003emuch\u003c\/span\u003e any time on documentation. If you want all of the good info, go to \u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-Hardware\/tree\/master\/Daylight\" target=\"_blank\" title=\"daylight on a stick documentation\" rel=\"noopener noreferrer\"\u003eBlamm!'s Disco on a Stick documentation\u003c\/a\u003e. He actually did the work. I am just copying what he did and putting it in the shape of a Voron logo. \u003cbr\u003e\u003cbr\u003eThe only thing you need to know is that they use the WS2812B-V5\/W LEDs. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44215361929438,"sku":"2058555737","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/disco_on_a_skirt_750x750_a1ced500-ea01-49c3-b393-bb5f7b78e1ca.jpg?v=1685801742"},{"product_id":"neopixel-disco-stick-resistor-board","title":"Neopixel\/Disco Stick Resistor Board","description":"\u003cp\u003eThis board is designed to be an easy way to add a 100ohm resistor inline on the neopixel data line. \u003c\/p\u003e\n\u003cp\u003eThe function of this resistor is to minimize signal reflection and aid in a cleaner data signal to the neopixels. This results in your strings of RGB leds performing as you'd expect, instead of randomly changing colors.\u003c\/p\u003e\n\u003c!----\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":45604822810846,"sku":"4022344539","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/Disco_Stick_Resistor_Board.jpg?v=1719710509"}],"url":"https:\/\/formosissima.myshopify.com\/collections\/lighting.oembed?page=2","provider":"dfh.fm","version":"1.0","type":"link"}