{"title":"Mods","description":"","products":[{"product_id":"ge5c-spherical-bushing-plain-bearing","title":"GE5C Spherical Bushing Plain Bearings","description":"\u003cp\u003eThe GE5C is a radial spherical plain bearing with a 5mm bore: a steel inner ball seated in a steel outer race with a PTFE-composite sliding surface, so it self-aligns and runs maintenance-free with no balls or seals. The spherical contact absorbs misalignment and edge loads, which is why it's used in 3D printer joints such as Voron Tap and other pivoting\/articulating mounts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesignation: GE5C (radial spherical plain)\u003c\/li\u003e\n\u003cli\u003eBore (ID): 5mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter (OD): 14mm\u003c\/li\u003e\n\u003cli\u003eWidth: 6mm (inner ring width ~4mm)\u003c\/li\u003e\n\u003cli\u003eConstruction: steel on PTFE composite, self-lubricating\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold in packs of 3 or 4.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"3","offer_id":42869697478878,"sku":"4276355420","price":12.99,"currency_code":"USD","in_stock":true},{"title":"4","offer_id":42869697511646,"sku":"4276355421","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled11_0.5x.jpg?v=1624390525"},{"product_id":"m12-nylon-cable-gland","title":"M12 Nylon Cable Gland","description":"\u003cp\u003eM12 x 1.5 waterproof nylon cable gland for clean, strain-relieved cable entry. It threads into a panel or printed part, and the compression cap clamps down on the cable so the wire can't be tugged out of its connector. Rated IP68 with the sealing nut tightened.\u003c\/p\u003e\u003cp\u003eOn a 3D printer it's the tidy way to bring wiring through an enclosure wall, a control-box panel, or a printed toolhead housing - and to add strain relief to CAN bus and umbilical cables. Sold in packs; clamping range suits typical small-gauge printer wiring.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"1","offer_id":48294154338526,"sku":"2295452963","price":2.99,"currency_code":"USD","in_stock":true},{"title":"10","offer_id":48294154371294,"sku":"2295452963-10","price":17.99,"currency_code":"USD","in_stock":true},{"title":"25","offer_id":48294154404062,"sku":"2295452963-25","price":34.99,"currency_code":"USD","in_stock":true},{"title":"50","offer_id":48294154436830,"sku":"2295452963-50","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_8431_0.5x.jpg?v=1626403590"},{"product_id":"klicky-probe-kit","title":"Klicky Probe Kit","description":"\u003cp\u003eMore information on Klicky Probe may be found \u003ca title=\"klicky probe GitHub\" href=\"https:\/\/github.com\/jlas1\/Klicky-Probe\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/jlas1\/Klicky-Probe\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe:\n\u003cul\u003e\n\u003cli\u003e1x D2F-L microswitch\u003c\/li\u003e\n\u003cli\u003e2x M2x10 self tapping\u003c\/li\u003e\n\u003cli\u003e4x 6x3 magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAB mount:\n\u003cul\u003e\n\u003cli\u003e3x 6x3 magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eProbe Dock:\n\u003cul\u003e\n\u003cli\u003e1x 6x3 magnets\u003c\/li\u003e\n\u003cli\u003e2x M3x20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed Dock mount:\n\u003cul\u003e\n\u003cli\u003e2x M3 threaded insert M3x5x4\u003c\/li\u003e\n\u003cli\u003e2x M5x10\u003c\/li\u003e\n\u003cli\u003e2x M5 t-nut or equivalent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003evariable Dock mount:\n\u003cul\u003e\n\u003cli\u003e10x M3 threaded insert M3x5x4\u003c\/li\u003e\n\u003cli\u003e8x M3x8\u003c\/li\u003e\n\u003cli\u003e2x M5x10\u003c\/li\u003e\n\u003cli\u003e2x M5 t-nut or equivalent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrinted parts not included.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":40774696108201,"sku":"2936081808","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled12_0.5x_a21fe1f1-936c-4e1c-9ec7-d18f109651d9.jpg?v=1625463811"},{"product_id":"voron-v0-1-belted-z-kit","title":"Voron V0 Belted Z Kit","description":"\u003cp\u003eBelted Z mod for Voron V0. \u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x m3x35 BHCS\u003c\/li\u003e\n\u003cli\u003e2 x m3x20 BHCS\u003c\/li\u003e\n\u003cli\u003e7 x m3x12 BHCS\u003c\/li\u003e\n\u003cli\u003e4 x m3x10 BHCS\u003c\/li\u003e\n\u003cli\u003e5 x m3x8 BHCS\u003c\/li\u003e\n\u003cli\u003e5 x m5x16 BHCS\u003c\/li\u003e\n\u003cli\u003e4 x m5 washer\u003c\/li\u003e\n\u003cli\u003e4 x m3 washer\u003c\/li\u003e\n\u003cli\u003e7 x m3 nut\u003c\/li\u003e\n\u003cli\u003e4 x threaded inserts\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x MF105-2RS Bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e3 x F695-2RS \u003c\/span\u003ebearing\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x 5mm x 72mm Shaft\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 x GT2 20T Pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x 450mm GT2 belt 6mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1 x GT2 188mm belt loop \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom shaft, R\u0026amp;S Bearings, Gates belt and Runice pulley. \u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":40800952844457,"sku":"5005431957","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/7514B0F8-516B-4071-898F-92C2F45CDB1A.jpg?v=1629652442"},{"product_id":"voron-switchwire-belt-conversion-kit","title":"Voron Switchwire 9mm Belt Conversion Kit","description":"\u003cp\u003eConvert your janky 6mm belt to sturdy AF 9mm with this amazing mod. \u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x M5x25 BHCS\u003c\/li\u003e\n\u003cli\u003e2 x M5x30 BHCS\u003c\/li\u003e\n\u003cli\u003e1 x M3x25 SHCS\u003c\/li\u003e\n\u003cli\u003e8 x M5x1 Spacer\u003c\/li\u003e\n\u003cli\u003e8 x F695 Bearing\u003c\/li\u003e\n\u003cli\u003e4 x 695 2RS Bearing\u003c\/li\u003e\n\u003cli\u003e1 x GT2 20T Pulley 5B9W\u003c\/li\u003e\n\u003cli\u003e1 x 1m GT2 Belt 9mm\u003c\/li\u003e\n\u003cli\u003e3 x M3 Heat inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore information may be found \u003ca href=\"https:\/\/github.com\/VoronDesign\/VoronUsers\/tree\/master\/printer_mods\/consibonsi\/Y-Mod_SW_9mm\" title=\"Link to SW 9mm Github\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":40812030689449,"sku":"5834728799","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/image01_0.5x.jpg?v=1625788807"},{"product_id":"molex-micro-fit-dual-row-4-circuit-kit","title":"Molex Micro-Fit Dual Row 4 Circuit Kit","description":"\u003cp\u003e\u003cstrong\u003eA small Micro-Fit 3.0 connector kit for 4-circuit wire-to-wire or wire-to-board harness work.\u003c\/strong\u003e This Molex kit pairs dual-row 4-circuit housings with matching male and female crimp terminals, useful for compact 3D-printer electronics, toolhead wiring, and serviceable harnesses.\u003c\/p\u003e\n\u003ch3\u003eWhat is included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × Molex 43020-0401\u003c\/strong\u003e Micro-Fit 3.0 plug housings, dual row, 4 circuits. Also available as the \u003ca href=\"https:\/\/dfh.fm\/products\/micro-fit-3-0-plug-housing-dual-row-4-circuits-430200401\"\u003eindividual 43020-0401 plug housing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × Molex 43025-0400\u003c\/strong\u003e Micro-Fit 3.0 receptacle housings, dual row, 4 circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × male Micro-Fit crimp terminals\u003c\/strong\u003e and \u003cstrong\u003e10 × female Micro-Fit crimp terminals\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Micro-Fit 3.0\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.00 mm pitch\u003c\/strong\u003e keeps harness connectors compact without dropping to tiny JST-class contacts.\u003c\/li\u003e\n\u003cli\u003eMolex Micro-Fit is designed for power and signal interconnects; the family supports \u003cstrong\u003eup to 10.5 A\u003c\/strong\u003e when the correct terminals, wire gauge, and derating are used.\u003c\/li\u003e\n\u003cli\u003ePositive-latching housings make it a better choice than loose Dupont-style connectors for printer wiring that gets moved or serviced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Molex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Micro-Fit 3.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector format:\u003c\/strong\u003e dual-row, 4-circuit \/ 4-position, 2×2 layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch:\u003c\/strong\u003e 3.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing color:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical use:\u003c\/strong\u003e compact harness disconnects for 3D-printer electronics, toolhead boards, motors, fans, and accessories where the mating connector family matches Micro-Fit 3.0.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse with the correct Micro-Fit 3.0 crimp tooling and compatible wire gauge for your terminal choice.\u003c\/li\u003e\n\u003cli\u003eThis is a \u003cstrong\u003e4-circuit Micro-Fit 3.0 kit\u003c\/strong\u003e; it is not Mini-Fit Jr., JST-XH, JST-PH, or Dupont.\u003c\/li\u003e\n\u003cli\u003eFor other Micro-Fit sizes, see the \u003ca href=\"https:\/\/dfh.fm\/products\/molex-micro-fit-3-0-2-position-single-row-receptical\"\u003e2-position Micro-Fit housing\u003c\/a\u003e or the \u003ca href=\"https:\/\/dfh.fm\/products\/molex-14-pin-conn-receptacle-for-toolhead-board\"\u003e14-pin Micro-Fit housing\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Molex","offers":[{"title":"Default Title","offer_id":40922993066153,"sku":"7209731961","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_9289.jpg?v=1627246790"},{"product_id":"igus-pressfit-bearing-eglm-05","title":"Igus Pressfit Bearing EGLM-05","description":"\u003cp\u003eThe Igus EGLM-05 is an igubal polymer spherical plain bearing and a direct drop-in for the steel GE5C, in the same 5x14 envelope. An iglidur L280 ball pivots inside an igumid G housing, so it self-aligns to absorb misalignment and edge loads while running dry, with no grease and no maintenance. It's lighter than the steel GE5C and corrosion-resistant, a common choice for Voron Tap and other pivoting printer joints.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesignation: EGLM-05 (igubal spherical, per ISO 12240)\u003c\/li\u003e\n\u003cli\u003eBore (ID): 5mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter (OD): 14mm\u003c\/li\u003e\n\u003cli\u003eWidth: 6mm\u003c\/li\u003e\n\u003cli\u003eHousing: igumid G; ball: iglidur L280\u003c\/li\u003e\n\u003cli\u003ePress-fit into H7 bore; self-lubricating, -30 to +80C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold in quantity packs.\u003c\/p\u003e","brand":"Igus","offers":[{"title":"1","offer_id":43177071476958,"sku":"2977315609","price":5.99,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":43177071509726,"sku":"2977315610","price":17.99,"currency_code":"USD","in_stock":true},{"title":"4","offer_id":43177071542494,"sku":"2977315611","price":21.99,"currency_code":"USD","in_stock":true},{"title":"10","offer_id":43385508954334,"sku":"7061567690","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled27.jpg?v=1630448962"},{"product_id":"side-swipe-magnetic-probe-kit","title":"Side Swipe Magnetic Probe Kit","description":"\u003cp\u003e\u003cstrong\u003eSide Swipe is a bolt-on magnetic bed probe hardware kit for Voron V0 and V0.1 printers using the MiniAfterburner direct-drive toolhead.\u003c\/strong\u003e It bundles the fasteners, servo, magnets, switch, and wiring called for by the open-source Side Swipe v1.5 project.\u003c\/p\u003e\n\u003ch3\u003eWhy use Side Swipe on a V0?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned as a compact automatic probing mod for the tight Voron V0\/V0.1 envelope.\u003c\/li\u003e\n\u003cli\u003eMagnetic probe block couples to the mount during probing, then parks out of the way.\u003c\/li\u003e\n\u003cli\u003eUses common Voron-style hardware so the printed mechanism stays serviceable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2× M3x8 SHCS\u003c\/strong\u003e, \u003cstrong\u003e2× M3x10 SHCS\u003c\/strong\u003e, \u003cstrong\u003e2× M3x40 SHCS\u003c\/strong\u003e, and \u003cstrong\u003e2× M3 nuts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1× MG90S\/MG90D-size servo\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e5× 6x3 mm neodymium magnets\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1× Omron microswitch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1× 300 mm servo extension cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1× 450 mm two-conductor wire\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThe upstream Side Swipe project lists support for \u003cstrong\u003eVoron V0\/V0.1 with MiniAfterburner\u003c\/strong\u003e. For larger Voron builds, compare alternatives like the \u003ca href=\"https:\/\/dfh.fm\/products\/klicky-probe-kit\"\u003eKlicky Probe Kit\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/quickdraw-probe-for-voron-switchwire\"\u003eQuickdraw Probe for Voron Switchwire\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eBuild notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint the Side Swipe parts from the official project files, preferably in ABS as specified by the project.\u003c\/li\u003e\n\u003cli\u003eMagnet orientation matters: the probe block top magnets must match each other, and the mount magnets must be oriented so the block attaches correctly.\u003c\/li\u003e\n\u003cli\u003eThe probe switch is wired normally closed; test continuity during assembly before final installation.\u003c\/li\u003e\n\u003cli\u003eIf you want a spare switch, see the \u003ca href=\"https:\/\/dfh.fm\/products\/omron-d2f5-l-micoswitch\"\u003eOmron D2F-5L Microswitch\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a complete printed plastic assembly; printed Side Swipe parts are not listed in this hardware kit.\u003c\/li\u003e\n\u003cli\u003eNot a universal Voron probe. Official support is V0\/V0.1 MiniAfterburner; other toolheads or V0.2-style builds need a compatible adaptation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":41392200089769,"sku":"8268128358","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/814BAD6E-D0FB-41CA-A76F-D42821B7CC08.jpg?v=1640729912"},{"product_id":"quickdraw-probe-for-voron-switchwire","title":"Quickdraw Probe for Voron Switchwire","description":"\u003cp\u003eBy, \u003cspan data-mce-fragment=\"1\"\u003ehymness1\u003c\/span\u003e. More information may be found \u003ca title=\"Quickdraw_probe_Voron_Switchwire\" href=\"https:\/\/github.com\/hymness1\/VoronUsers\/tree\/master\/printer_mods\/hymness1\/Quickdraw_probe_Voron_Switchwire\" target=\"_blank\"\u003ein the repo.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOmron D2Fx (or equivalent) x 2\u003c\/li\u003e\n\u003cli\u003e6x3mm magnets x 8\u003c\/li\u003e\n\u003cli\u003eM2x12mm screws (magnetic) x 2\u003c\/li\u003e\n\u003cli\u003eM3x8mm SHCS x 2\u003c\/li\u003e\n\u003cli\u003eM5X12mm SHCS x 2\u003c\/li\u003e\n\u003cli\u003eM5 T-nut for 3030 extrusion x 2\u003c\/li\u003e\n\u003cli\u003eM3x5x4 threaded heat inserts x 4\u003c\/li\u003e\n\u003cli\u003e1.4m 24AWG wire\u003c\/li\u003e\n\u003cli\u003eMicroFit3 male pins x 2\u003c\/li\u003e\n\u003cli\u003eM2x10 Self Tapping Screws x 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":41605482610857,"sku":"1539090069","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/008B5461-3FB7-474F-B7B9-EE60CAE638E4_1_201_a.jpg?v=1635486703"},{"product_id":"steel-extrusion-backers","title":"Steel Extrusion Backers - by Lightweight Labware","description":"\u003cp\u003ePowder coated steel, this round.\u003c\/p\u003e\n\u003cdiv class=\"product-single__description rte\"\u003e\n\u003cp\u003eFull set of 3 steel extrusion backers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits, both, Trident and V2.4.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eShips in a custom, \u003cstrong\u003edog hair free\u003c\/strong\u003e, box.\u003c\/p\u003e\n\u003cp\u003eTons of info may be found in the github repo, \u003ca aria-describedby=\"a11y-new-window-external-message\" href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/extrusion_backers\" title=\"backers GitHub\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Read it. It's amazing work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-id=\"7144971206825\" id=\"shopify-product-reviews\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003eTi backers are located \u003ca href=\"https:\/\/deepfriedhero.in\/products\/titanium-extrusion-backers?variant=41043803865257\" title=\"ti backers\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Lightweight Labware","offers":[{"title":"250 \/ That's a Fee - Purple","offer_id":42065000562910,"sku":"5844512716","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ Funke - Blue","offer_id":42065000595678,"sku":"1646519587","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ Banana for Scale - Yellow","offer_id":42065000628446,"sku":"4878115425","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ Slightly Darker - Black","offer_id":42065000661214,"sku":"5874954923","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ I Demand to Speak With the Manager - White","offer_id":42065000693982,"sku":"2877150973","price":45.0,"currency_code":"USD","in_stock":true},{"title":"250 \/ Two in the - Pink","offer_id":42065000726750,"sku":"8596088361","price":45.0,"currency_code":"USD","in_stock":true},{"title":"300 \/ That's a Fee - Purple","offer_id":42065000759518,"sku":"3665683065","price":50.0,"currency_code":"USD","in_stock":false},{"title":"300 \/ Funke - Blue","offer_id":42065000792286,"sku":"3204727191","price":50.0,"currency_code":"USD","in_stock":false},{"title":"300 \/ Banana for Scale - Yellow","offer_id":42065000825054,"sku":"8266487956","price":50.0,"currency_code":"USD","in_stock":true},{"title":"300 \/ Slightly Darker - Black","offer_id":42065000857822,"sku":"2422430560","price":50.0,"currency_code":"USD","in_stock":true},{"title":"300 \/ I Demand to Speak With the Manager - White","offer_id":42065000890590,"sku":"3201567830","price":50.0,"currency_code":"USD","in_stock":true},{"title":"300 \/ Two in the - Pink","offer_id":42065000923358,"sku":"1121656021","price":50.0,"currency_code":"USD","in_stock":true},{"title":"350 \/ That's a Fee - Purple","offer_id":42065000956126,"sku":"2706681244","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ Funke - Blue","offer_id":42065000988894,"sku":"6346956565","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ Banana for Scale - Yellow","offer_id":42065001021662,"sku":"8124380777","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ Slightly Darker - Black","offer_id":42065001054430,"sku":"5490290489","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ I Demand to Speak With the Manager - White","offer_id":42065001087198,"sku":"5579312471","price":55.0,"currency_code":"USD","in_stock":false},{"title":"350 \/ Two in the - Pink","offer_id":42065001119966,"sku":"4689755065","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled38_1ad8de42-e7a0-4a52-8119-1c74d3792d43.png?v=1653541782"},{"product_id":"ramas-front-idlers-for-voron-v2","title":"Rama's Front Idlers for Voron v2","description":"\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x M3x30 SHCS (Full threaded) or M3x40 SHCS (Full threaded)\u003c\/li\u003e\n\u003cli\u003e2x M3x8 or M3x10\u003c\/li\u003e\n\u003cli\u003e4x M3 Washer\u003c\/li\u003e\n\u003cli\u003e4x M5 Washer\u003c\/li\u003e\n\u003cli\u003e4x M3-Inserts\u003c\/li\u003e\n\u003cli\u003e4x F695-2RS bearing\u003c\/li\u003e\n\u003cli\u003e2x 5x18 Pin (g6)\u003c\/li\u003e\n\u003cli\u003e4x 3x6 Magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInformation is available on \u003ca href=\"https:\/\/github.com\/Ramalama2\/Voron-2-Mods\/tree\/main\/Front_Idlers\" title=\"rama idler git\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42099863716062,"sku":"5373475629","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/5427A599-2755-4A8F-9D2F-C1B8F6CDF1B7_1_105_c.jpg?v=1637633833"},{"product_id":"zero-filter-kit-by-zruncho","title":"Zero-Filter Kit by Zruncho","description":"\u003ch3 dir=\"auto\"\u003eA recirculating air filter that fits in the tightest of spaces\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eMounts cleanly under the bed of an \u003ca href=\"https:\/\/github.com\/zruncho3d\/f-zero\"\u003eF-Zero\u003c\/a\u003e, \u003ca href=\"https:\/\/github.com\/hartk1213\/Micron\"\u003eMicron\u003c\/a\u003e, or other smaller-volume, \"zero-size\" enclosed printer.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eHeavily inspired by the \u003ca href=\"https:\/\/github.com\/nevermore3d\"\u003eNevermore series of air filters\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSpecs:\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eUses standard 4010 blower fans, without modification\u003c\/li\u003e\n\u003cli\u003ePrints easily, without supports, and no crazy overhangs\u003c\/li\u003e\n\u003cli\u003eLid attaches quickly and securely to the cartridge, for easy filter media changes\u003c\/li\u003e\n\u003cli\u003eCartridge snaps into place, magnetically, with a satisfying click\u003c\/li\u003e\n\u003cli\u003eIncludes a gasket slot for a perfect seal between base and cartidge\u003c\/li\u003e\n\u003cli\u003eOne fits in a 70mm x 97mm space; two fit in a 70mm x 194mm space\u003c\/li\u003e\n\u003cli\u003eMounts with a provided brace and one screw, or with high-bond tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e- Taken from the \u003ca title=\"zero filter GitHub\" href=\"https:\/\/github.com\/zruncho3d\/zerofilter\" target=\"_blank\"\u003eGitHub repo\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eKit includes:\u003c\/h4\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e4010 blower fan\u003c\/li\u003e\n\u003cli\u003e14g carbon\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequired fasteners\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42273538867422,"sku":"4679192491","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0545.jpg?v=1640733802"},{"product_id":"voron-v2-4-z-drive-motor-tensioner-mod-by-edwardyeeks","title":"Voron v2.4 Z-Drive Motor Tensioner Mod by edwardyeeks","description":"\u003cp dir=\"auto\"\u003eTaken from the \u003ca href=\"https:\/\/github.com\/VoronDesign\/VoronUsers\/tree\/master\/abandoned_mods\/printer_mods\/edwardyeeks\/V2.4_z_drive_motor_tensioner_mod\" target=\"_blank\" title=\"z tensioner mod repo\" rel=\"noopener noreferrer\"\u003eGitHub repo\u003c\/a\u003e\u003ca href=\"https:\/\/github.com\/VoronDesign\/VoronUsers\/tree\/master\/printer_mods\/edwardyeeks\/V2.4_z_drive_motor_tensioner_mod\" title=\"z tensioner mod repo\" target=\"_blank\"\u003e:\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1 dir=\"auto\"\u003eV2.4 Z-Drive Motor Tensioner Mod\u003c\/h1\u003e\n\u003cp dir=\"auto\"\u003eMod that replaces the motor tensioner assembly in the z drive to make it better braced and eliminates chance to rotate\/twist when you tension and potentially when the drive operates. The stock motor tensioning had the tendency to flex if not tightened\/installed carefully, causing the closed loop belt to easily rub against the pulley flanges. I prefer being able to lock down the entire z drive as a single unit, hence the design choices.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eUnfortunately, the skirt geometry changes, so you will have to reprint the front skirts entirely. Besides that, you only need to reprint the motor bracket and the base plate for this mod.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eFor this reason, this mod is entirely OPTIONAL. Perhaps consider it if you are starting a new build or you wish to improve over the current z drives and are willing to print more plastic.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e[Sic]\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eExtra parts that you will need (2x per drive, therefore 8x in total):\u003c\/p\u003e\n\u003cul dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e8x M3X12mm bolts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e8x M3X5X4mm heatset inserts (the specced ones in Vorons)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e8x 1mm M3 washers\/shims (7mm OD max, optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe, above, parts, are included in the kit.\u003c\/strong\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42281688858846,"sku":"8223097672","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/43A1EFCF-D9B7-4443-B587-6398DB28F003.jpg?v=1640902862"},{"product_id":"rainbow-barf-led-pcb-by-whoppingpochard-and-vinnycordeiro","title":"Rainbow Barf LED PCB by Lightweight Labware and vinnycordeiro","description":"\u003cp\u003e\u003cstrong\u003eAddressable Voron logo lighting for StealthBurner.\u003c\/strong\u003e The Rainbow Barf Logo LED is a compact PCB from Lightweight Labware \/ whoppingpochard and vinnycordeiro with \u003cstrong\u003eeight WS2812B-2020 protocol-compatible RGB LEDs\u003c\/strong\u003e arranged to line up with the Voron StealthBurner logo cutout.\u003c\/p\u003e\n\u003ch3\u003eWhy use Rainbow Barf instead of a single logo LED?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight independently addressable LEDs\u003c\/strong\u003e let each section of the logo animate separately instead of glowing as one block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStealthBurner-specific layout\u003c\/strong\u003e matches the Voron logo window and fits the special printed carrier\/diffuser from the project files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKlipper-friendly\u003c\/strong\u003e: the official project points to Klipper LED Effect examples for logo animations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProject: \u003ca href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/LEDs\/Rainbow_Barf_Logo_LED\"\u003eRainbow Barf Logo LED for StealthBurner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLEDs: \u003cstrong\u003e8× WS2812B-2020\u003c\/strong\u003e addressable RGB LEDs, LCSC C965555\u003c\/li\u003e\n\u003cli\u003ePassive parts from the official BOM: \u003cstrong\u003e100 nF 0402 capacitor\u003c\/strong\u003e and \u003cstrong\u003e470 Ω 0402 resistor\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for the Voron \u003cstrong\u003eStealthBurner\u003c\/strong\u003e logo diffuser\/carrier assembly\u003c\/li\u003e\n\u003cli\u003eApproximate board class: about the size of a single 5050 WS2812 NeoPixel PCB, per the project documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and installation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse with a Voron StealthBurner toolhead and the project’s printed carrier and diffuser.\u003c\/li\u003e\n\u003cli\u003eFor a bundled install path, see the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit-rainbow-barf-edition\"\u003eVoron StealthBurner Fastener and LED Kit: Rainbow Barf Edition\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor fine toolhead wiring, pair it with \u003ca href=\"https:\/\/dfh.fm\/products\/30awg-stranded-fep-wire-x-10m\"\u003e30AWG stranded FEP wire\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis listing is for the Rainbow Barf LED PCB only; printed carrier\/diffuser parts and wiring are not included unless explicitly shown in your order.\u003c\/li\u003e\n\u003cli\u003eIt is not a drop-in replacement for every StealthBurner LED setup without soldering and Klipper configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Many LED, such wow!”\u003c\/blockquote\u003e","brand":"Lightweight Labware","offers":[{"title":"Default Title","offer_id":42495893733598,"sku":"7956583636","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0931_a2f797b5-f7d8-42e4-8dba-7d97b9a07209.png?v=1645672301"},{"product_id":"voron-v0-machined-aluminum-nut-block-by-whoppingpochard","title":"Voron V0 Machined Aluminum Nut Block - by Lightweight Labware","description":"\u003cp\u003e\u003cstrong\u003eHard-anodized machined aluminum nut block for Voron V0 Z assemblies.\u003c\/strong\u003e This is a CNC aluminum replacement for the printed Voron \u003ccode\u003eT8_Nut_Block\u003c\/code\u003e used to hold the TR8 lead screw nut in the V0 bed\/Z stack.\u003c\/p\u003e\n\u003ch3\u003eWhy use the machined block\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the printed nut block with a rigid, hard-anodized aluminum part.\u003c\/li\u003e\n\u003cli\u003eBuilt for the stock Voron V0-style T8 nut block location, not as a separate Z conversion.\u003c\/li\u003e\n\u003cli\u003eUseful when you want a cleaner, more durable bed\/Z mount without reprinting the structural block.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Voron V0 builds that use the stock \u003ccode\u003eT8_Nut_Block\u003c\/code\u003e geometry.\u003c\/li\u003e\n\u003cli\u003ePair with a TR8 lead screw nut such as the \u003ca href=\"https:\/\/dfh.fm\/products\/tr8-8mm-anti-backlash-lead-screw-nut-pom\"\u003eTR8 8mm anti-backlash lead screw nut\u003c\/a\u003e and the needed M3 hardware from the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-v0-fasteners-kit\"\u003eVoron V0 fasteners kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eIf you are deleting the lead screw Z setup entirely, compare against the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-v0-1-belted-z-kit\"\u003eVoron V0 belted Z kit\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a lead screw nut by itself; the TR8 nut and mounting screws are separate unless your kit includes them.\u003c\/li\u003e\n\u003cli\u003eNot a full bed carriage or Kirigami bed upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“This is a nice nut block” — verified buyer review\u003c\/blockquote\u003e","brand":"Lightweight Labware","offers":[{"title":"Default Title","offer_id":42571636277470,"sku":"4028832344","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_1050.png?v=1647287353"},{"product_id":"voron-2-4-sexbolt-z-endstop-super-kit","title":"Voron 2.4 and Trident Sexbolt Z Endstop Super Kit","description":"\u003cp\u003eUpdated version, compatable with kinematic bed mounts. \u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoron 2.4 endstop PCB (complete)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x M4x8 SHCS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1x M4x16 Hex Head Bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x 5mmx20mm Binding Screw\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x 5mmx25mm Binding Screw\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 x M2x8 Self Tapping screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 x 5x7x8 Sleeve Bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003e\u003c\/span\u003e\u003cspan mce-data-marked=\"1\"\u003eFully compatible with the Voron 2.4 and Trident. \u003c\/span\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Kit only","offer_id":42577694163166,"sku":"3628693666","price":14.99,"currency_code":"USD","in_stock":false},{"title":"Kit WIth Printed Parts","offer_id":42577694195934,"sku":"5445971395","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_1067_7d882de1-ddf7-4d29-9802-bd5c8a2b5795.png?v=1647461008"},{"product_id":"titanium-extrusion-backers-for-salad-fork","title":"Titanium Extrusion Backers for Salad Fork 160mm - by Lightweight Labware","description":"\u003cp\u003e\u003cstrong\u003eTitanium gantry extrusion backers for the Salad Fork 160mm build.\u003c\/strong\u003e These Lightweight Labware plates are sized for the 1515-extrusion Salad Fork and are based on whoppingpochard's open-source extrusion-backer design for counteracting gantry bow from rail\/extrusion thermal expansion.\u003c\/p\u003e\n\u003ch3\u003eWhy use titanium backers?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtrusion backers mount opposite the linear rails so the gantry is less prone to bimetal-style movement as the printer warms up.\u003c\/li\u003e\n\u003cli\u003eThe original Voron mod documents titanium backers as a lighter, high-performance alternative to steel backer plates.\u003c\/li\u003e\n\u003cli\u003eUseful on compact enclosed machines where a small mesh shift can matter more than it looks on paper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine fit:\u003c\/strong\u003e Salad Fork 160mm, a Printers for Ants printer based on a scaled-down Voron Trident using 1515 aluminum extrusion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e titanium backer plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e \u003cstrong\u003eX and Y\u003c\/strong\u003e set, or \u003cstrong\u003eY\u003c\/strong\u003e backers only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign source:\u003c\/strong\u003e based on the open-source \u003ca href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/extrusion_backers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewhoppingpochard extrusion backers\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for \u003ca href=\"https:\/\/github.com\/PrintersForAnts\/Salad_Fork\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSalad Fork\u003c\/a\u003e 160mm machines.\u003c\/li\u003e\n\u003cli\u003ePairs with the \u003ca href=\"https:\/\/dfh.fm\/products\/dfh-440c-salad-fork-160mm-linear-rails-kit\"\u003eDFH 440C Salad Fork 160mm Linear Rails Kit\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/salad-fork-motion-kit\"\u003eSalad Fork Motion Kit\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/no-drop-nuts-for-european-standard-1515-extrusion\"\u003eNo-Drop Nuts for European Standard 1515 Extrusion\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor Voron V2.4 \/ Trident-size builds, use the larger \u003ca href=\"https:\/\/dfh.fm\/products\/titanium-extrusion-backers\"\u003eTitanium Extrusion Backers\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a full Salad Fork kit, frame kit, or rail kit.\u003c\/li\u003e\n\u003cli\u003eNot a generic 2020 Voron V2.4 \/ Trident backer set; this listing is for the 160mm Salad Fork size.\u003c\/li\u003e\n\u003cli\u003eFasteners and T-nuts are not listed as included unless shown in the selected variant or order contents.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lightweight Labware","offers":[{"title":"X \u0026 Y","offer_id":43230127227102,"sku":"8345272121","price":27.5,"currency_code":"USD","in_stock":true},{"title":"Y","offer_id":43230127259870,"sku":"8345272122","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled57.jpg?v=1647896085"},{"product_id":"unklicky-sidegrade-kit-by-dustinspeed","title":"Unklicky Sidegrade Kit - by Dustinspeed","description":"\u003cp\u003e\u003cstrong\u003eConvert an existing Klicky probe to Unklicky.\u003c\/strong\u003e This Dustinspeed sidegrade kit supplies the small contact parts for the original 3x2mm Unklicky probe: \u003cstrong\u003e200mm FEP wire\u003c\/strong\u003e and \u003cstrong\u003eone 3x2mm round magnet\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy use Unklicky?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBased on the official Unklicky project: a drop-in, magnet-based Klicky-style probe that keeps the original Klicky body shape.\u003c\/li\u003e\n\u003cli\u003eUses the project’s wire-wrapped pin method; the wire and screw contact form the normally-closed switch circuit while the magnet provides spring force.\u003c\/li\u003e\n\u003cli\u003eUseful when you already have a \u003ca href=\"https:\/\/dfh.fm\/products\/klicky-probe-kit\"\u003eKlicky Probe Kit\u003c\/a\u003e and want to build the Unklicky 3x2mm variant instead of a microswitch-based probe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e200mm FEP wire\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 × 3x2mm round magnet\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and requirements\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor the original Unklicky \/ Klicky-body 3x2mm probe design by Dustinspeed \/ majarspeed.\u003c\/li\u003e\n\u003cli\u003eIntended for Voron-style Klicky probe builds, including V2.4, Trident, and V1.8 setups that already use Klicky-compatible mounts.\u003c\/li\u003e\n\u003cli\u003eBuild documentation and printed-part files are maintained in the \u003ca href=\"https:\/\/github.com\/majarspeed\/Unklicky\" target=\"_blank\" rel=\"noopener\"\u003eofficial Unklicky GitHub repository\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a complete probe kit. Printed parts, screws, dock\/mount hardware, wiring harnesses, and the rest of the Klicky hardware are not included.\u003c\/li\u003e\n\u003cli\u003eIf you are starting from zero, use the \u003ca href=\"https:\/\/dfh.fm\/products\/unklicky-full-kit-by-dustinspeed\"\u003eUnklicky Full Kit\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42614637232350,"sku":"7683891908","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/ScreenShot2022-03-27at8.54.19PM_eb387299-ebfd-4542-a95f-6b01b1cb2fa4.png?v=1648436438"},{"product_id":"unklicky-full-kit-by-dustinspeed","title":"Unklicky Full Kit - by Dustinspeed","description":"\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/github.com\/majarspeed\/Unklicky\"\u003eUnklicky\u003c\/a\u003e\u003c\/span\u003e is an offshoot of \u003ca href=\"https:\/\/github.com\/jlas1\/Klicky-Probe\"\u003e\u003cspan\u003eKlicky Probe\u003c\/span\u003e\u003c\/a\u003e, which uses magnets instead of an endstop.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is a full Unklicky kit. No extra purchase required. Should you want to try, both, Klicky and Unklicky, you may purchase required Klicky endstops \u003ca title=\"link to switches\" href=\"https:\/\/deepfriedhero.in\/products\/omron-d2f5-l-micoswitch\" target=\"_blank\"\u003ehere\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKit includes:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProbe:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1x 3x2mm round magnet\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x M2x10 self tapping (unnecessary, but leaving them in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4x 6x3 magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAB mount:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3x 6x3 magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProbe Dock:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1x 6x3 magnets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x M3x20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFixed Dock Mount:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x M3 threaded insert M3x5x4\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x M5x10\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x M5 t-nut or equivalent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVariable Dock Mount:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10x M3 threaded insert M3x5x4\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e8x M3x8\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x M5x10\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x M5 t-nut or equivalent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMisc:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e200mm FEP wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42614842097886,"sku":"9016108378","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/ScreenShot2022-03-27at8.54.19PM.png?v=1648437657"},{"product_id":"v2-magnetic-panels-kit-by-bobbleheed","title":"V2 Magnetic Panels Kit - by bobbleheed","description":"\u003cp\u003eFrom \u003ca href=\"https:\/\/github.com\/VoronDesign\/VoronUsers\/tree\/master\/printer_mods\/bobbleheed\/Magnetic_Panels\" target=\"_blank\" title=\"link to GitHub repo for mod\" rel=\"noopener noreferrer\"\u003ethe repo\u003c\/a\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis mod allows for the\u003c\/span\u003e\u003cspan\u003e removal of the panels on a V2, ideal for switching between ABS and PLA printing. This mod assumes a panel depth of 6mm, either from a 6mm panel or a 3mm panel + 3mm foam tape. It will not hold the panels against the frame without this thickness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e72 x 6x3mm Round Magnets\u003c\/li\u003e\n\u003cli\u003e24 x M3x8 SHCS\u003c\/li\u003e\n\u003cli\u003e24 x M3 Roll-In or Hammerhead T-Nuts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42615112564958,"sku":"5130249925","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/B3F1D3A3-7B2C-498A-BEA7-FC2965EBE820.png?v=1648444729"},{"product_id":"ultra-lightweight-aluminum-pins-kit","title":"Ultra Lightweight Aluminum Voron V2 and Trident Pins Kit","description":"\u003cp\u003e\u003cstrong\u003eBlack anodized 5 mm aluminum pin kit for Hartk’s Voron V2.4 and Trident pins mod.\u003c\/strong\u003e This 14-piece kit replaces M5 screw shafts at idler, pulley, and bearing locations with smooth lightweight pins: \u003cstrong\u003e43 mm x2, 40 mm x4, 30 mm x2, and 28 mm x6\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy use pins instead of M5 screws?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth bearing surface:\u003c\/strong\u003e the Hartk\/Voron pins mod replaces screw threads where bearings, pulleys, and idlers ride on the shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower moving weight:\u003c\/strong\u003e aluminum pins are the ultra-light option; West3D lists its equivalent aluminum kit at about \u003cstrong\u003e63% weight savings\u003c\/strong\u003e versus the standard steel pin set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrect BOM for the mod:\u003c\/strong\u003e matches the published Voron2.4 and Trident Pins Mod hardware list: 30 mm x2, 28 mm x6, 40 mm x4, 43 mm x2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5 mm pins \/ shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e lightweight aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded lengths:\u003c\/strong\u003e 43 mm x2, 40 mm x4, 30 mm x2, 28 mm x6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMod reference:\u003c\/strong\u003e Hartk1213 Voron2.4 and Trident Pins Mod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor Voron V2.4 and Voron Trident builds using the Hartk pins mod printed parts. It is a hardware pin kit only; print the pinned A\/B drive, front idler, XY joint, and V2 Z idler parts from the mod before installation.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is not a full printed-parts kit and does not include bearings, pulleys, screws, or printed parts.\u003c\/li\u003e\n\u003cli\u003eThe 30 mm positions may be built with smooth pins in place of threaded pins if you do not need to remove the pins without removing the stepper, matching the mod author’s note.\u003c\/li\u003e\n\u003cli\u003eFor nearby Voron motion upgrades, see \u003ca href=\"https:\/\/dfh.fm\/products\/ultra-lightweight-aluminum-ramas-front-idlers-for-voron-v2\"\u003eRama’s Front Idlers\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/voron-bfci-kit-by-clee-ultra-lightweight-aluminum-edition\"\u003eclee BFCI front idlers\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/voron-bfzi-beefy-z-idlers-kit-by-clee-ultra-lightweight-aluminum-edition\"\u003eclee BFZI Z idlers\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Even the ends are black. High class.”\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42623272222942,"sku":"9585966877","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_1179.png?v=1648641614"},{"product_id":"voron-v0-rgb-side-panels","title":"Voron V0 RGB Side Panels","description":"\u003ch4\u003eVoron V0 RGB Side Panels*\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003ePackage includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e36 WS2812B-B SMD LED's\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/chemcast.com.mx\/optik.html\" alt=\"Chemcast LED panels\"\u003eChemcast Black and LED Panels\u003c\/a\u003e, left and right\u003c\/li\u003e\n\u003cli\u003ePCB LED panels, left and right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csmall\u003e* By \u003ca href=\"https:\/\/github.com\/timmit99\/Voron_Zero_RGB_Side_Panels\" alt=\"timmit rgb panel github\" taarget=\"_blank\"\u003etimmit\u003c\/a\u003e, to whom I will be donating 5% of the profit from the panels.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly 25 sets \u003c\/strong\u003e\u003cb\u003eavailable. \u003c\/b\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42724310286558,"sku":"2751722534","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/1E88199E-A505-4986-BB09-F7239206A971_1_105_c.jpg?v=1650626207"},{"product_id":"voron-trident-kinematic-bed-mount-by-whoppingpochard","title":"Voron Trident Kinematic Bed Mount - by Lightweight Labware","description":"\u003cp\u003e\u003cstrong\u003eLaser-cut kinematic bed mounts for Voron Trident.\u003c\/strong\u003e This Lightweight Labware \/ Whoppingpochard kit replaces rigid Trident bed mounting with a Maxwell-style three-point kinematic support so the aluminum bed can expand as it heats instead of being over-constrained.\u003c\/p\u003e\n\u003ch3\u003eWhy use a kinematic bed mount?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces heat-induced bed stress:\u003c\/strong\u003e the design is intended to limit the “taco effect” caused by constraining an aluminum build plate at fixed mounting points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built for Voron Trident:\u003c\/strong\u003e this is the Trident version of Lightweight Labware’s kinematic bed mount system, not the V2.4 kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware-ready upgrade:\u003c\/strong\u003e vendor listings describe the kit as including the fasteners needed for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigner \/ manufacturer:\u003c\/strong\u003e Lightweight Labware, also known as Whoppingpochard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Voron Trident aluminum bed mounting system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e laser-cut black anodized aluminum mount plates with blued spring-steel kinematic leaves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e LWL-KIN-TRI-ALU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference documentation:\u003c\/strong\u003e \u003ca href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/kinematic_bed\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLightweight Labware kinematic bed mount GitHub\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003eUse this on a Voron Trident build where you want the bed to locate repeatably while still allowing thermal expansion. Pair it with a flat aluminum bed such as the \u003ca href=\"https:\/\/dfh.fm\/products\/black-anodized-ultra-flat-aluminum-bed\"\u003eBlack Anodized Ultra-Flat Aluminum Bed\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/ultra-flat-aluminum-bed\"\u003eUltra-Flat Aluminum Bed by Lightweight Labware\u003c\/a\u003e, and add the correct \u003ca href=\"https:\/\/dfh.fm\/products\/silicone-heating-pad\"\u003eUniversal Silicone Heating Pad\u003c\/a\u003e for your bed size.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot the Voron V2.4 kinematic bed mount kit.\u003c\/li\u003e\n\u003cli\u003eNot a replacement for bed leveling, probing, or a flat build plate.\u003c\/li\u003e\n\u003cli\u003eSpring-steel leaves can show surface oxidation over time; vendor guidance is to lightly oil them periodically in humid environments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lightweight Labware","offers":[{"title":"Default Title","offer_id":42799454552286,"sku":"9278535906","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled15_36674fa2-e82b-4e90-897b-4ed267f1c437.jpg?v=1652225701"},{"product_id":"unklicky-sexbolt","title":"Unklicky Sexbolt","description":"\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6x3MM Magnet x 2\u003c\/li\u003e\n\u003cli\u003e18 mm M3 screw x 1\u003c\/li\u003e\n\u003cli\u003e18 awg wire x 1m\u003c\/li\u003e\n\u003cli\u003eMicrofit 2 wire Male connector x 1\u003c\/li\u003e\n\u003cli\u003eMicrofit 2 wire Female connector x 1\u003c\/li\u003e\n\u003cli\u003eMicrofit 2 wire Male pins x 2\u003c\/li\u003e\n\u003cli\u003eMicrofit 2 wire Female Pins x 2\u003c\/li\u003e\n\u003cli\u003eM3 heatset inserts x 3\u003c\/li\u003e\n\u003cli\u003eM3 6 mm screws x 2\u003c\/li\u003e\n\u003cli\u003eM4 threaded rod 10mm (currently m4x12 flat grub screw) x 1\u003c\/li\u003e\n\u003cli\u003eM5 bearing sleeve x 1\u003c\/li\u003e\n\u003cli\u003e695 unflanged bearing x 1\u003c\/li\u003e\n\u003cli\u003eM5 sexbolt\/Chicago screw 12 mm for standard height x 1\u003c\/li\u003e\n\u003cli\u003eM5 sexbolt\/Chicago screw 20mm for kinematic x 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit by @Dustinspeed#6423. More information available \u003ca href=\"https:\/\/github.com\/majarspeed\/Unklicky\/tree\/main\/Unklicky_Endstops\/Unklicky_SexBolt\/Readme.md\" title=\"link to unklicky sexbolt\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAs always, creator wlll receive a (small) portion of sales.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42944364970206,"sku":"6513999391","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Untitled51.png?v=1655067856"},{"product_id":"ultra-lightweight-aluminum-micron-pins-mod-kit","title":"Ultra Lightweight Aluminum Micron Pins Mod Kit","description":"\u003cp\u003e\u003cstrong\u003eUltralight aluminum pin set for Hartk’s Micron Pin Mod.\u003c\/strong\u003e This kit replaces the mod’s 3mm pin hardware with lightweight aluminum pins cut for the Micron AB drives, XY joints, front idler, and Z idler.\u003c\/p\u003e\n\u003ch3\u003eWhy use aluminum pins here\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for \u003ca href=\"https:\/\/github.com\/PrintersForAnts\/Micron\/tree\/main\/Mods\/hartk1213\/Pin_Mod\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHartk’s Micron Pin Mod\u003c\/a\u003e, which documents the required pin lengths for the Micron motion assemblies.\u003c\/li\u003e\n\u003cli\u003eLower moving mass than steel pins; West3D’s matching ultralight Micron pin-mod listing states approximately \u003cstrong\u003e63% weight savings\u003c\/strong\u003e versus traditional steel pins.\u003c\/li\u003e\n\u003cli\u003eSized as a drop-in hardware kit for Micron builders who already have the printed Pin Mod parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded pins\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eM3 × 25mm\u003c\/strong\u003e pins × \u003cstrong\u003e4\u003c\/strong\u003e for AB drives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM3 × 25mm\u003c\/strong\u003e pins × \u003cstrong\u003e4\u003c\/strong\u003e for XY joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM3 × 35mm\u003c\/strong\u003e pins × \u003cstrong\u003e2\u003c\/strong\u003e for the front idler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM3 × 20mm\u003c\/strong\u003e pins × \u003cstrong\u003e4\u003c\/strong\u003e for the Z idler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor Printers for Ants \/ Hartk Micron builds using the Micron Pin Mod. If you are building around the stock Micron motion hardware, check the mod documentation before ordering so the printed parts and pin layout match your build.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the pin hardware only; printed parts, bearings, pulleys, and the printer kit are not included.\u003c\/li\u003e\n\u003cli\u003eFor adjacent Micron build hardware, see the live \u003ca href=\"https:\/\/dfh.fm\/products\/micron-frame\"\u003eMicron Classic Frame\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/makerbeam-xl-t-nut\"\u003eMakerBeam XL T-Nut\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/shim-washers\"\u003eShim Washers\u003c\/a\u003e listings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43036558065886,"sku":"8744739009","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_2219.png?v=1656551018"},{"product_id":"ultra-lightweight-aluminum-salad-fork-pins-mod-kit","title":"Ultra Lightweight Aluminum Salad Fork Pins Mod Kit","description":"\u003cp\u003e\u003cstrong\u003eAluminum 3 mm captive pin kit for the Salad Fork pin mod.\u003c\/strong\u003e This kit replaces the threaded M3 idler screw axles with smooth, lightweight aluminum pins for the older Salad Fork pin-mod layout.\u003c\/p\u003e\n\u003ch3\u003eWhy use pins instead of screws?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoother idler axle surface:\u003c\/strong\u003e the official Salad Fork captive-pins mod notes that screws are slightly undersized and rough because of their threads, while 3 mm pins are smooth and closer to true diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower moving mass:\u003c\/strong\u003e aluminum pins cut weight compared with steel pin or screw hardware in the gantry\/idler stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner captured assembly:\u003c\/strong\u003e captive pins are intended to stay retained in the printed pin-mod parts instead of walking out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × 3 mm x 22 mm\u003c\/strong\u003e aluminum pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 × 3 mm x 18 mm\u003c\/strong\u003e aluminum pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor Salad Fork \/ Printers for Ants builds using the older Salad Fork pin-mod hardware set. Pair it with the \u003ca href=\"https:\/\/dfh.fm\/products\/salad-fork-motion-kit\"\u003eSalad Fork Motion Kit\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/salad-fork-fastener-kit\"\u003eSalad Fork Fasteners Kit\u003c\/a\u003e when refreshing the gantry hardware.\u003c\/p\u003e\n\u003ch3\u003eCheck before you build\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot a full motion kit:\u003c\/strong\u003e bearings, printed pin-mod parts, belts, pulleys, and fasteners are not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSalad Fork v1.1 note:\u003c\/strong\u003e the current official captive-pins BOM calls for 6 × 18 mm, 2 × 22 mm, and 2 × 14 mm pins. This older-style kit does not include 14 mm pins; cut two 18 mm pins down or source 14 mm pins separately if your printed parts require the v1.1 lengths.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43036833251550,"sku":"8103241100","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/65B59AB4-5826-44A1-8AA1-7B17CC5B2EBB.png?v=1656552341"},{"product_id":"ntc-thermistor-with-lug-nut-adapter","title":"NTC Thermistor With Lug Nut Adapter","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eNTC Thermistors 10K 2% UL Recognized Mini Lug w\/connector\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eModel NTCALUG03A103GC\u003c\/p\u003e\n\u003cdiv title=\"Page 1\" class=\"page\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e \u003ccol\u003e \u003ccol\u003e \u003ccol\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eQUICK REFERENCE DATA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003ePARAMETER\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eVALUE\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eUNIT\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eResistance value at 25 °C\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e10K to 47K\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eΩ\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eTolerance on \u003c\/span\u003e\u003cspan\u003eR\u003c\/span\u003e\u003cspan\u003e25\u003c\/span\u003e\u003cspan\u003e-value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e± 2 to ± 3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eB\u003c\/span\u003e\u003cspan\u003e25\/85\u003c\/span\u003e\u003cspan\u003e-value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e3740 to 3984\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eTolerance on B\u003c\/span\u003e\u003cspan\u003e25\/85\u003c\/span\u003e\u003cspan\u003e-value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e± 0.5 to ± 1.5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating temperature range: At zero dissipation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e-40 to +125\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e°C\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eResponse time\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e≈ \u003c\/span\u003e\u003cspan\u003e3.5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003es\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eThermal time constant \u003c\/span\u003e\u003cspan\u003eτ\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e≈\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003es\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eDissipation factor \u003c\/span\u003e\u003cspan\u003eδ\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e10\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003emW\/K\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eMin. dielectric withstanding voltage between terminals and lug\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e1000\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eV\u003c\/span\u003e\u003cspan\u003eAC\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eClimatic category (LCT \/ UCT \/ days)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e40 \/ 125 \/ 56\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e-\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eWeight\u003cbr\u003ewithout connector with connector\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003e~ 0.5 ~ 0.6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cspan\u003eg g\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Vishay BCcomponents","offers":[{"title":"Default Title","offer_id":43094765011166,"sku":"9657001991","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/NTCCALUG03-1.jpg?v=1657601979"},{"product_id":"micron-120-titanium-backers-and-nut-bars-set","title":"Micron 120 Titanium Backers and Nut Bars Set","description":"\u003cp\u003e\u003cstrong\u003eTitanium gantry backers and nut bars for the 120mm Printers for Ants Micron.\u003c\/strong\u003e This set packages the Micron 120 backer plates and rail\/nut bars for a cleaner small-format gantry build on 1515 extrusion.\u003c\/p\u003e\n\u003ch3\u003eWhy this set\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt around the 120mm Micron \/ Micron Classic size, not the larger 180mm Micron+ hardware set.\u003c\/li\u003e\n\u003cli\u003eTitanium backers follow the Lightweight Labware \/ whoppingpochard backer concept: add a matching metal strip opposite the linear rail to reduce gantry movement from thermal expansion mismatch between rail and extrusion.\u003c\/li\u003e\n\u003cli\u003eCombines the backers and nut bars in one checkout line instead of making you piece the small hardware rails together separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded parts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × 208mm\u003c\/strong\u003e nut bar with \u003cstrong\u003eM3\u003c\/strong\u003e threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 × 190mm\u003c\/strong\u003e nut bars with \u003cstrong\u003eM2\u003c\/strong\u003e threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × X\u003c\/strong\u003e titanium backers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional 1 × Y\u003c\/strong\u003e titanium backer — choose the “Yep” variant if you want the Y backer included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor the \u003ca href=\"https:\/\/dfh.fm\/products\/micron-frame\"\u003eMicron Classic \/ 120mm Micron frame\u003c\/a\u003e and compatible Printers for Ants Micron 120 builds.\u003c\/li\u003e\n\u003cli\u003eUse with the official Micron 120-style 1515 extrusion frame; the official BOM lists 120mm Micron as the smaller build with 160mm-class rails.\u003c\/li\u003e\n\u003cli\u003ePairs with the \u003ca href=\"https:\/\/dfh.fm\/products\/backers-screw-set\"\u003eBackers Screw Set\u003c\/a\u003e if you need dedicated backer screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is not a full frame kit, rail kit, or screw kit.\u003c\/li\u003e\n\u003cli\u003eDo not use this for 180mm Micron+ unless you have separately verified the lengths you need.\u003c\/li\u003e\n\u003cli\u003eBackers work by being installed opposite the relevant linear rail; check the Micron docs and backer documentation before tightening everything down.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lightweight Labware","offers":[{"title":"Yep","offer_id":43287518839006,"sku":"9257259672","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Nope","offer_id":43287518871774,"sku":"8846117595","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_2738.jpg?v=1660802306"},{"product_id":"kirigami-beds","title":"Kirigami Beds by Christoph Mueller","description":"\u003cp\u003e\u003cstrong\u003eLightweight, stiff Kirigami bed carriage for Voron V0 builds.\u003c\/strong\u003e Christoph Mueller’s open-source Kirigami design replaces the stock multi-piece V0 bed support with a laser-cut and bent single-piece sheet-metal carriage, while keeping the bed mounting screws accessible for service and adjustment.\u003c\/p\u003e\n\u003ch3\u003eWhy use the Kirigami bed?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiffer bed support with less mass:\u003c\/strong\u003e the Kirigami structure is designed as a lightweight single-piece carriage instead of a stack of separate bed-support parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter service access:\u003c\/strong\u003e the design leaves full access to the mounting screws, so bed work is less painful after the printer is assembled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUseful version changes:\u003c\/strong\u003e V2 adds the thermal-fuse cutout; V3 changes the bed-spring holes to slots for about \u003cstrong\u003e3 mm\u003c\/strong\u003e of Y-offset adjustment, supporting V0.0 fitment and the Sherpa Mini mod.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications and fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProject:\u003c\/strong\u003e Christoph Mueller’s \u003ca href=\"https:\/\/github.com\/christophmuellerorg\/voron_0_kirigami_bed\" target=\"_blank\" rel=\"noopener\"\u003evoron_0_kirigami_bed\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinter family:\u003c\/strong\u003e Voron V0-family builds and retrofits using the Kirigami bed mod, including common V0.1 and V0.2 conversions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e laser-cut, bent, single-piece sheet-metal bed carriage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersions:\u003c\/strong\u003e V2 with thermal-fuse cutout; V3 with slotted bed-spring mounts for Y-offset adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProject BOM hardware:\u003c\/strong\u003e 8× M2x4 screws for the bed-to-carriage mounts, plus M3 heat-set inserts and M3x6 screws for the lead-screw mount, chain mount, and wire guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose V3\u003c\/strong\u003e for most new builds, especially if you want the slotted Y-offset adjustment or are accounting for a Sherpa Mini-style setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose V2\u003c\/strong\u003e only when matching an existing V2 build or older printed-part set. The project notes that V2 can be modified into V3 with some work, but V3 is the cleaner starting point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat else you may need\u003c\/h3\u003e\n\u003cp\u003eThis listing is the Kirigami metal bed carriage, not a complete heated-bed, wiring, or hardware kit. Print the Kirigami-specific plastic parts from the project files and check the GitHub BOM against your build. If you are refreshing hardware, we also stock \u003ca href=\"https:\/\/dfh.fm\/products\/black-nickel-coated-threaded-heat-set-inserts\"\u003eM3 heat-set inserts\u003c\/a\u003e and a \u003ca href=\"https:\/\/dfh.fm\/products\/voron-v0-fasteners-kit\"\u003eVoron V0 fasteners kit\u003c\/a\u003e; verify the exact screw lengths before ordering.\u003c\/p\u003e\n\u003ch3\u003eNot included \/ gotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a heated bed, heater pad, magnetic base, PEI spring-steel sheet, or complete LDO-style electronics kit.\u003c\/li\u003e\n\u003cli\u003ePrinted plastic parts are not included.\u003c\/li\u003e\n\u003cli\u003eOn V3, set the Y offset in the slotted spring mounts, then tighten the bed securely so the carriage cannot creep.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DFH","offers":[{"title":"v2 \/ Black","offer_id":43382871556318,"sku":"2427858416","price":11.99,"currency_code":"USD","in_stock":false},{"title":"v2 \/ Raw Hematite","offer_id":43382871654622,"sku":"2427858419","price":11.99,"currency_code":"USD","in_stock":false},{"title":"v2 \/ Rose Gold","offer_id":43382871687390,"sku":"2427858418","price":11.99,"currency_code":"USD","in_stock":true},{"title":"v2 \/ Red","offer_id":43382871720158,"sku":"4960995316","price":11.99,"currency_code":"USD","in_stock":false},{"title":"v2 \/ White","offer_id":43382871785694,"sku":"2427858417","price":11.99,"currency_code":"USD","in_stock":false},{"title":"v2 \/ Splatter Neon","offer_id":43382871818462,"sku":"5593920648","price":29.99,"currency_code":"USD","in_stock":true},{"title":"v2 \/ Splatter Earth","offer_id":43382871851230,"sku":"8674602013","price":29.99,"currency_code":"USD","in_stock":true},{"title":"V3 \/ Space Blue","offer_id":43382871883998,"sku":"6620205817","price":16.99,"currency_code":"USD","in_stock":true},{"title":"V3 \/ Sky Blue","offer_id":43382871916766,"sku":"7749272392","price":16.99,"currency_code":"USD","in_stock":true},{"title":"V3 \/ Forest Green","offer_id":43382871949534,"sku":"4130850097","price":16.99,"currency_code":"USD","in_stock":true},{"title":"V3 \/ Cloud White","offer_id":43382871982302,"sku":"3517199807","price":16.99,"currency_code":"USD","in_stock":true},{"title":"V3 \/ Black","offer_id":43382872015070,"sku":"5982221727","price":16.99,"currency_code":"USD","in_stock":true},{"title":"V3 \/ Gunmetal","offer_id":43382872047838,"sku":"9102984002","price":16.99,"currency_code":"USD","in_stock":true},{"title":"V3 \/ Pink","offer_id":43382872080606,"sku":"7633997277","price":16.99,"currency_code":"USD","in_stock":true},{"title":"V3 \/ Purple","offer_id":43382872211678,"sku":"6557982152","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/black2.jpg?v=1662874730"},{"product_id":"micron-frame-doom-upgrade","title":"Micron Frame DOOM Upgrade","description":"\u003cp\u003e\u003cstrong\u003eConvert a Micron frame toward the DOOM layout with the extra door and vertical extrusion pieces.\u003c\/strong\u003e This upgrade is for Micron 120mm and 180mm builds and is offered in matching anodized colors: satin hot pink, satin purple, satin black, satin space grey, and gloss white.\u003c\/p\u003e\n\u003ch3\u003eWhat this upgrade adds\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor extrusion plus the vertical extrusion needed for the Micron DOOM-style frame conversion.\u003c\/li\u003e\n  \u003cli\u003eColor-matched extrusion options for existing \u003ca href=\"https:\/\/dfh.fm\/products\/micron-frame\"\u003eMicron Classic Frame\u003c\/a\u003e builds.\u003c\/li\u003e\n  \u003cli\u003e120mm and 180mm build-size variants so you can match the frame size you already have.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and project context\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMade for Printers for Ants Micron builds being converted toward a Micron DOOM \/ DoomCube-style layout.\u003c\/li\u003e\n  \u003cli\u003eThe community DooMicron files describe the 180mm version as modifications that turn a Micron 180 into a Doom Cube variant and call out DFH rounded-corner extrusions.\u003c\/li\u003e\n  \u003cli\u003eFor 180mm panel coverage, pair this frame upgrade with \u003ca href=\"https:\/\/dfh.fm\/products\/micron-doom-panels-180mm-by-kevinakasam\"\u003eMicron Doom Panels 180mm by kevinakasam\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose the right variant\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e120mm\u003c\/strong\u003e: choose this if your Micron frame\/build volume is the 120mm size.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e180mm\u003c\/strong\u003e: choose this for Micron 180 \/ Micron+ DOOM-style conversions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhite is gloss\u003c\/strong\u003e; all other listed colors are satin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNot a complete Micron frame kit.\u003c\/li\u003e\n  \u003cli\u003eDoes not include acrylic\/ACM panels, printed parts, latch hardware, or the base Micron printer\/frame.\u003c\/li\u003e\n  \u003cli\u003eConfirm your printed mod files and build size before ordering; the DOOM conversion has multiple community variants.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"120mm \/ Hot Pink","offer_id":43521937506526,"sku":"6958539684","price":49.99,"currency_code":"USD","in_stock":true},{"title":"120mm \/ Purple","offer_id":43521937539294,"sku":"6797147632","price":49.99,"currency_code":"USD","in_stock":true},{"title":"120mm \/ Black","offer_id":43521937473758,"sku":"1114306565","price":49.99,"currency_code":"USD","in_stock":false},{"title":"120mm \/ Space Grey","offer_id":43521937440990,"sku":"3471686221","price":49.99,"currency_code":"USD","in_stock":true},{"title":"120mm \/ White","offer_id":43521937408222,"sku":"7144560039","price":49.99,"currency_code":"USD","in_stock":true},{"title":"180mm \/ Hot Pink","offer_id":43521937670366,"sku":"3468704606","price":69.99,"currency_code":"USD","in_stock":true},{"title":"180mm \/ Purple","offer_id":43521937703134,"sku":"6773165265","price":69.99,"currency_code":"USD","in_stock":false},{"title":"180mm \/ Black","offer_id":43521937637598,"sku":"9592966928","price":69.99,"currency_code":"USD","in_stock":false},{"title":"180mm \/ Space Grey","offer_id":43521937604830,"sku":"7466034102","price":69.99,"currency_code":"USD","in_stock":false},{"title":"180mm \/ White","offer_id":43521937572062,"sku":"7752235466","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/pi.jpg?v=1665648768"},{"product_id":"5015-clear-fan-rear-housing-by-jake","title":"5015 Clear Fan Rear Housing by Jake","description":"\u003cp\u003e\u003cstrong\u003eClear PETG rear housing for the 5015 Stealthburner fan mod.\u003c\/strong\u003e This printed Jake design re-houses a GDSTime-style 5015 blower fan so Stealthburner LEDs can shine through the rear of the fan.\u003c\/p\u003e\n\u003ch3\u003eWhy use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the \u003cstrong\u003e5015 Clear Fan Rear Housing\u003c\/strong\u003e Printables model by Jake \/ AllAboutJake.\u003c\/li\u003e\n\u003cli\u003eClear PETG construction keeps the fan body translucent for RGB \/ NeoPixel lighting effects.\u003c\/li\u003e\n\u003cli\u003ePairs with Stealthburner LED setups such as the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit\"\u003eVoron Stealthburner Fastener and LED Kit\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/rainbow-barf-led-pcb-by-whoppingpochard-and-vinnycordeiro\"\u003eRainbow Barf LED PCB\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and install notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntended for Voron Stealthburner builds using a \u003cstrong\u003e5015 blower fan\u003c\/strong\u003e; see the source model and instructions on \u003ca href=\"https:\/\/www.printables.com\/model\/273994-5015-clear-fan-rear-housing\"\u003ePrintables model 273994\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eThe source instructions require cutting a GDSTime 5015 fan down to the PCB, then gluing the PCB into this rear housing.\u003c\/li\u003e\n\u003cli\u003eAuthor note: the mod is experimental and should be installed carefully to avoid damaging the fan motor or axle clip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a complete fan assembly, PCB, LED board, or Stealthburner kit.\u003c\/li\u003e\n\u003cli\u003eNot a drop-in fan swap; it is a printed mod for builders comfortable disassembling a 5015 blower.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Worked perfectly with disassembled 5015 fan and a little gorilla glue.”\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43539421364446,"sku":"4467794724","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/46D7CB4D-4485-42DB-8976-28516478A59F.jpg?v=1666067948"},{"product_id":"double-folded-ascender-extruder-kit","title":"Double Folded Ascender Extruder Kit","description":"\u003cp\u003eDouble Folded Ascender is a take on the \"popular\" worm direct-driven extruder system. It is available in a 20:1 variant.\u003c\/p\u003e\n\u003cp\u003eThe original concept was originally developed by Trails and RentableSocks back in ~March 2019, it has since evolved many times and RentableSocks has now taken over development on this extruder full time.\u003c\/p\u003e\n\u003cp\u003eMore info \u003ca title=\"assbutt github\" href=\"https:\/\/github.com\/Annex-Engineering\/Folded_Ascender-Extruder\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eReference image includes optional XOL.\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003ctable\u003e\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003eitem\u003c\/td\u003e\n\u003ctd\u003erequired\u003c\/td\u003e\n\u003ctd\u003eincluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x35 SHCS A2 \u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x25 SHCS A2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x12 SHCS A2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x20 SHCS A2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Washer Steel\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7x5x0.5mm Shim A2\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Heatset Brass with Black Nickel Coating\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM4 Grub Screw\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eDFH\u003c\/strong\u003e 5x45mm G6 Shaft w\/ D Flat Bearing Steel\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eRunice\u003c\/strong\u003e RNC Coated BMG Clone Gear Set (needle bearings included)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eRunice\u003c\/strong\u003e 3x20 Shaft G6 Bearing Steel\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eRunice\u003c\/strong\u003e MR85-2RS\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eKHK\u003c\/strong\u003e DG0.5-40R1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eKHK\u003c\/strong\u003e SW0.5-R2\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eLDO\u003c\/strong\u003e LDO-36STH17-1004AH Stepper Motor (optional)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eMolex\u003c\/strong\u003e Micro-Fit 3.0 Male Pins\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eMolex\u003c\/strong\u003e Micro-Fit 3.0 Female Pins\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eMolex\u003c\/strong\u003e Micro-Fit 3.0 Male 4 Pin Single Row\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eMolex\u003c\/strong\u003e Micro-Fit 3.0 Female 4 Pin Single Row\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eJST\u003c\/strong\u003e PH Pins\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eJST\u003c\/strong\u003e PH 4 Pin Connector\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eJST\u003c\/strong\u003e XH Pins\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eJST\u003c\/strong\u003e XH 4 Pin Connector\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"dfh.fm","offers":[{"title":"Black Oxide Coated Steel \/ With Motor","offer_id":44345588515038,"sku":"7614498245","price":74.99,"currency_code":"USD","in_stock":false},{"title":"Black Oxide Coated Steel \/ Kit Only","offer_id":44345588547806,"sku":"9226850151","price":54.99,"currency_code":"USD","in_stock":false},{"title":"Stainless Steel \/ With Motor","offer_id":44345588580574,"sku":"7060071168","price":74.99,"currency_code":"USD","in_stock":false},{"title":"Stainless Steel \/ Kit Only","offer_id":44345588613342,"sku":"7128815113","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/unknown_44206e1b-4544-4228-9115-c60ebee75317.jpg?v=1666408189"},{"product_id":"dfh-doomcube-upgrade-kit","title":"DFH Doomcube Upgrade Kit","description":"\u003cp\u003eIt's like the other kit out there, but with, you know, a door.\u003c\/p\u003e\n\u003cp\u003eThe rounded upgrade verticals also ship with no visible through hole, for a much cleaner look.\u003c\/p\u003e\n\u003cp\u003eAll standard Voron v2 sizes available: 250, 300, 350.\u003c\/p\u003e\n\u003cp\u003eShips in Empire White, Definitely Not Space Grey, Hot Fucking Pink, That's a Fee Purple and Slightly Darker Black.\u003c\/p\u003e\n\u003cp\u003eAll but Empire White have an amazing satin finish. Empire White is shiny AF.\u003c\/p\u003e","brand":"Decent","offers":[{"title":"250mm \/ Empire White","offer_id":43626985586910,"sku":"2235371007","price":79.99,"currency_code":"USD","in_stock":true},{"title":"250mm \/ Definitely Not Space Grey","offer_id":43626985619678,"sku":"9551331266","price":79.99,"currency_code":"USD","in_stock":true},{"title":"250mm \/ Hot Fucking Pink","offer_id":43626985652446,"sku":"5598516163","price":79.99,"currency_code":"USD","in_stock":false},{"title":"250mm \/ That's a Fee Purple","offer_id":43626985685214,"sku":"7980040657","price":79.99,"currency_code":"USD","in_stock":true},{"title":"250mm \/ Matte Black","offer_id":43626985717982,"sku":"8364718020","price":79.99,"currency_code":"USD","in_stock":true},{"title":"300mm \/ Empire White","offer_id":43627006001374,"sku":"7766351758","price":89.99,"currency_code":"USD","in_stock":true},{"title":"300mm \/ Definitely Not Space Grey","offer_id":43627006034142,"sku":"9716323626","price":89.99,"currency_code":"USD","in_stock":true},{"title":"300mm \/ Hot Fucking Pink","offer_id":43627006066910,"sku":"8273372626","price":89.99,"currency_code":"USD","in_stock":true},{"title":"300mm \/ That's a Fee Purple","offer_id":43627006099678,"sku":"2961195628","price":89.99,"currency_code":"USD","in_stock":true},{"title":"300mm \/ Matte Black","offer_id":43627006132446,"sku":"1651969139","price":89.99,"currency_code":"USD","in_stock":false},{"title":"350mm \/ Empire White","offer_id":43627006165214,"sku":"4867012069","price":99.99,"currency_code":"USD","in_stock":true},{"title":"350mm \/ Definitely Not Space Grey","offer_id":43627006197982,"sku":"5384257560","price":99.99,"currency_code":"USD","in_stock":false},{"title":"350mm \/ Hot Fucking Pink","offer_id":43627006230750,"sku":"5482566935","price":99.99,"currency_code":"USD","in_stock":false},{"title":"350mm \/ That's a Fee Purple","offer_id":43627006263518,"sku":"6108938843","price":99.99,"currency_code":"USD","in_stock":true},{"title":"350mm \/ Matte Black","offer_id":43627006296286,"sku":"3349877451","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_3395.jpg?v=1667735668"},{"product_id":"zeroclick-by-zruncho3d-probe-kit","title":"ZeroClick by zruncho3d Probe Kit","description":"\u003cp\u003eMore info available on the \u003ca title=\"Voron Zero Zeroclick by zruncho3d\" href=\"https:\/\/github.com\/zruncho3d\/ZeroClick\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/zruncho3d\/ZeroClick\"\u003eZeroClick GitHub page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eKit Includes:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eM2x10 Self Tapping Screws x 2\u003c\/li\u003e\n    \u003cli\u003eM3x6 BHCS x 3\u003c\/li\u003e\n    \u003cli\u003e3x5x4mm Threaded Inserts x 5\u003c\/li\u003e\n    \u003cli\u003e6x3mm Round Neodymium Magnets x 5\u003c\/li\u003e\n    \u003cli\u003eOmron D2F Endstop\u003c\/li\u003e\n  \u003c\/ul\u003e\n    ","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43738184876254,"sku":"6465264752","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/zeroclick_probe_kit.jpg?v=1670736802"},{"product_id":"ultra-lightweight-aluminum-ramas-front-idlers-for-voron-v2","title":"Ultra-Lightweight Aluminum Rama's Front Idlers","description":"\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x M3x30 SHCS (Full threaded) or M3x40 SHCS (Full threaded)\u003c\/li\u003e\n\u003cli\u003e2x M3x8 or M3x10 SHCS\u003c\/li\u003e\n\u003cli\u003e4x M3 Washer\u003c\/li\u003e\n\u003cli\u003e4x M5 Washer\u003c\/li\u003e\n\u003cli\u003e4x M3-Inserts\u003c\/li\u003e\n\u003cli\u003e4x F695-2RS Bearings\u003c\/li\u003e\n\u003cli\u003e2x Black 5x18 Pin (g6) Ultra-Ligthtweight Aluminum Pins\u003c\/li\u003e\n\u003cli\u003e4x 6x3 Round Magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInformation is available on \u003ca href=\"https:\/\/github.com\/Ramalama2\/Voron-2-Mods\/tree\/main\/Front_Idlers\" title=\"rama idler git\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43922425905374,"sku":"4854290781","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/5427A599-2755-4A8F-9D2F-C1B8F6CDF1B7_1_105_c_60f24d99-1db9-4224-aed9-d2cff364a67e.jpg?v=1674445138"},{"product_id":"klackender-probe-by-kevinakasam","title":"KlackEnder Probe by kevinakasam","description":"\u003cp\u003eFrom the \u003ca title=\"KlackEnder-Probe GitHub\" href=\"https:\/\/github.com\/kevinakasam\/KlackEnder-Probe\" target=\"_blank\"\u003erepo\u003c\/a\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat is This About?\u003c\/h3\u003e\n\u003cp\u003eAdaptation of the \u003ca title=\"Klicky-Probe github link\" href=\"https:\/\/github.com\/jlas1\/Klicky-Probe\" target=\"_blank\"\u003eKlicky\u003c\/a\u003e\/\u003ca title=\"Quickdraw_Probe github link\" href=\"https:\/\/github.com\/Annex-Engineering\/Quickdraw_Probe\" target=\"_blank\"\u003eQuickdraw\u003c\/a\u003e Probe for the Ender 3 and comparable Creality printers. The probe is compatible with all printers that use the X plate of the Ender 3 and cost of the probe is \u0026lt;10€, of which the switch is the most expensive part. The probe is compatible with Marlin and Klipper. Both firmwares work with the G29 command, the docking is done automatically by the printer, it couldn't be easier! Both firmwares add a KlackEnder menu to the display that can be used to dock and undock the Probe. The Bed-Mesh can be created via the custom menu, via the default firmware settings or with G29.\u003c\/p\u003e\n\u003cp\u003eMore info may be found in the \u003ca title=\"KlackEnder-Probe GitHub\" href=\"https:\/\/github.com\/kevinakasam\/KlackEnder-Probe\" target=\"_blank\"\u003erepo\u003c\/a\u003e and extremely well documented on \u003ca title=\"kevinakasam.com\" href=\"https:\/\/kevinakasam.com\" target=\"_blank\"\u003ekevinakasam.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Kit?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eJST-XH 2 Pin Housing x 1\u003c\/li\u003e\n\u003cli\u003eJST-XH 3 Pin Housing x 1\u003c\/li\u003e\n\u003cli\u003eJST-XH Female Pins x 6\u003c\/li\u003e\n\u003cli\u003eM5 T-Nut x 2\u003c\/li\u003e\n\u003cli\u003eM2x10 Self Tapping Screws for Plastic x 2\u003c\/li\u003e\n\u003cli\u003eM2x12 \u003cspan data-mce-fragment=\"1\"\u003eSelf Tapping Screws for Plastic x 2\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOmron D2F-x Microswitch\u003c\/li\u003e\n\u003cli\u003e1.5m 24AWG FEP Wire\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eZip-Tie 2x100mm x 3\u003c\/li\u003e\n\u003cli\u003eM3x10 BHCS x 1\u003c\/li\u003e\n\u003cli\u003eM3x12-16 BHCS x 1\u003c\/li\u003e\n\u003cli\u003eM5x8 BHCS x 2\u003c\/li\u003e\n\u003cli\u003eM6x3mm Round magnets x 6\u003c\/li\u003e\n\u003cli\u003eM5x45 SHCS x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Black Oxide Coated Steel","offer_id":44802377679070,"sku":"6547110744","price":8.99,"currency_code":"USD","in_stock":false},{"title":"Black Nickel Coated Stainless Steel","offer_id":44802377711838,"sku":"6547110745","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel","offer_id":44802377744606,"sku":"6547110746","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/ender_klicky_klack.jpg?v=1675420014"},{"product_id":"beltdrivenender3-kit-by-kevinakasam","title":"BeltDrivenEnder3 Kit by kevinakasam","description":"\u003cp\u003e\u003cstrong\u003eWhat comes in the kit\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eSingle Z:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20T 8mm bore 6mm width pulley by \u003cstrong\u003eRunice\u003c\/strong\u003e x 3\u003c\/li\u003e\n\u003cli\u003e16T 5mm bore 6mm width pulley by \u003cstrong\u003eRunice\u003c\/strong\u003e x 1\u003c\/li\u003e\n\u003cli\u003eLL-2GT-6 RF belt by \u003cstrong\u003eGates\u003c\/strong\u003e x 2m\u003c\/li\u003e\n\u003cli\u003e188mm RF belt Loop by \u003cstrong\u003eGates\u003c\/strong\u003e x 1\u003c\/li\u003e\n\u003cli\u003eF623-RS bearing by \u003cstrong\u003eRS\u003c\/strong\u003e x 4\u003c\/li\u003e\n\u003cli\u003e608 bearing by \u003cstrong\u003eRS\u003c\/strong\u003e x 5\u003c\/li\u003e\n\u003cli\u003eG6 stainless steel or black anodized aluminum M3x14mm pin by \u003cstrong\u003eDFH\u003c\/strong\u003e x 2\u003c\/li\u003e\n\u003cli\u003eG6\u003cmeta charset=\"UTF-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003estainless \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003es\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eteel\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e or \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eb\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003elack \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ea\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003enodized \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ea\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eluminum \u003c\/span\u003eM8x355mm Shaft by \u003cstrong\u003eDFH\u003c\/strong\u003e x 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDual Z:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20T 8mm bore 6mm width pulley by \u003cstrong\u003eRunice\u003c\/strong\u003e x 4\u003c\/li\u003e\n\u003cli\u003e16T 5mm bore 6mm width pulley by \u003cstrong\u003eRunice\u003c\/strong\u003e x 2\u003c\/li\u003e\n\u003cli\u003eLL-2GT-6 RF Belt by \u003cstrong\u003eGates\u003c\/strong\u003e x 2m\u003c\/li\u003e\n\u003cli\u003e188mm RF belt Loop by \u003cstrong\u003eGates\u003c\/strong\u003e x 2\u003c\/li\u003e\n\u003cli\u003eF623-RS bearing by \u003cstrong\u003eRS\u003c\/strong\u003e x 4\u003c\/li\u003e\n\u003cli\u003e608 bearing by \u003cstrong\u003eRS\u003c\/strong\u003e x 5\u003c\/li\u003e\n\u003cli\u003eG6\u003cmeta charset=\"UTF-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003estainless \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003es\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eteel\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e or \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eb\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003elack \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ea\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003enodized \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ea\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eluminum \u003c\/span\u003eM3x14mm pin by \u003cstrong\u003eDFH\u003c\/strong\u003e x 2\u003c\/li\u003e\n\u003cli\u003eG6\u003cmeta charset=\"UTF-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003estainless \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003es\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eteel\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e or \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eb\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003elack \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ea\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003enodized \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ea\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eluminum \u003c\/span\u003eM8x65mm Shaft by \u003cstrong\u003eDFH\u003c\/strong\u003e x 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore information may be found on \u003ca href=\"https:\/\/github.com\/kevinakasam\/BeltDrivenEnder3\" title=\"BeltDrivenEnder3 GitHub link\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e or, build yours, interactively, on \u003ca href=\"https:\/\/kevinakasam.com\" title=\"kevinakasam.com\" target=\"_blank\"\u003ekevinakasam.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eNote: Silver kits are currently shipping with black aluminum 3mm pins.\u003c\/small\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Single Z \/ Black","offer_id":43963792687326,"sku":"1983087836","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Single Z \/ Silver","offer_id":43967153144030,"sku":"2448127943","price":39.99,"currency_code":"USD","in_stock":false},{"title":"Dual Z \/ Black","offer_id":43963792785630,"sku":"3408514150","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Dual Z \/ Silver","offer_id":43967153209566,"sku":"9094330393","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/26DD65FB-FDE5-4A22-8D0B-8CB8B5A96CE6_1_201_a.jpg?v=1677744731"},{"product_id":"2-piece-z-tensioners-for-voron-v2-by-masturmynd","title":"2-Piece Z Tensioners for Voron v2 by MasturMynd","description":"\u003cp\u003e\u003cstrong\u003eHardware pack for MasturMynd’s 2-Piece Z Tensioners:\u003c\/strong\u003e four M3x25 button-head cap screws and four short M3x5x4 heat-set inserts for building the stronger two-piece Z belt tensioner mod for Voron V2\/V2.4 printers.\u003c\/p\u003e\n\u003ch3\u003eWhy this mod exists\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMasturMynd’s design reorients the printed tensioner parts so belt tension loads run perpendicular to the layer lines instead of trying to split them apart.\u003c\/li\u003e\n\u003cli\u003eThe result is a more durable replacement for cracked stock Voron V2 Z tensioners when used with the printed parts from the official project files.\u003c\/li\u003e\n\u003cli\u003eThis pack covers the small hardware called out in the project BOM, so you are not stuck hunting four odd-length M3 screws and matching inserts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded hardware\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × M3x25 BHCS\u003c\/strong\u003e for clamping the two-piece tensioner assemblies together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × short M3 brass heat-set inserts, M3x5x4\u003c\/strong\u003e, one per tensioner assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and build notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for MasturMynd’s \u003ca href=\"https:\/\/github.com\/MasturMynd\/2-Piece_Z_Tensioners\" target=\"_blank\" rel=\"noopener\"\u003e2-Piece Z Tensioners\u003c\/a\u003e mod for Voron V2\/V2.4 printers.\u003c\/li\u003e\n\u003cli\u003eThe official assembly also uses the printed tensioner parts, a GT2 20T idler, and either the BOM M5x30 BHCS setup or a 5x28mm pin. If you need the idlers, pair it with the \u003ca href=\"https:\/\/dfh.fm\/products\/20t-idler-bore-5mm-width-6mm-by-runice\"\u003e20T Idler Bore 5mm Width 6mm by Runice\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor spare inserts or broader printed-part work, see our \u003ca href=\"https:\/\/dfh.fm\/products\/black-nickel-coated-threaded-heat-set-inserts\"\u003eBlack Nickel Coated Threaded Heat Set Inserts\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a full Z-drive kit and not the printed tensioner parts.\u003c\/li\u003e\n\u003cli\u003eDoes not include GT2 idlers, M5x30 screws, 5x28mm pins, or M3x16 belt-tensioning screws.\u003c\/li\u003e\n\u003cli\u003eNot intended for Voron V0, Trident, Switchwire, or non-V2 Z tensioner layouts unless you have separately verified compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44041671377118,"sku":"2490321821","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/preview.jpg?v=1678066802"}],"url":"https:\/\/formosissima.myshopify.com\/collections\/mods.oembed?page=4","provider":"dfh.fm","version":"1.0","type":"link"}