{"title":"Phaetus","description":"","products":[{"product_id":"phaetus-dragonfly-bmo","title":"Phaetus Dragonfly BMO","description":"\u003cp\u003e\u003cstrong\u003ePhaetus Dragonfly BMO is an all-metal, V6-interface hotend for 1.75 mm filament.\u003c\/strong\u003e It uses a copper-alloy thermal core, a conical bi-metal heatbreak, and a plated copper V6-style nozzle to make high-temperature materials practical without giving up clean filament control.\u003c\/p\u003e\n\u003ch3\u003eWhy this over a basic V6 hotend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher-temperature material range:\u003c\/strong\u003e the Dragonfly BMO is specified for operation up to \u003cstrong\u003e500°C\u003c\/strong\u003e when paired with the correct heater cartridge and sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter heat control:\u003c\/strong\u003e the conical heatbreak\/heatsink interface improves thermal isolation and helps reduce heat creep compared with conventional hotends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV6-style fit:\u003c\/strong\u003e BMO is the V6-interface Dragonfly model, intended for printers and toolheads built around a V6 hotend mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament path quality:\u003c\/strong\u003e the internal bore is specified at \u003cstrong\u003e≤ Ra0.3\u003c\/strong\u003e roughness for steadier filament flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Phaetus Dragonfly Hotend BMO, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament:\u003c\/strong\u003e \u003cstrong\u003e1.75 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle interface:\u003c\/strong\u003e V6-style \u003cstrong\u003eM6\u003c\/strong\u003e nozzle; supplied configuration is commonly listed with a \u003cstrong\u003e0.4 mm plated copper nozzle\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend size:\u003c\/strong\u003e \u003cstrong\u003e62.35 mm × 21.7 mm × 18 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e aluminum heatsink, copper-alloy heatbreak\/heatblock, titanium-alloy support screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer no.:\u003c\/strong\u003e \u003cstrong\u003eA189-01A-15-3\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and use\u003c\/h3\u003e\n\u003cp\u003eUse the Dragonfly BMO where you need a V6-style all-metal hotend for Prusa MK3\/MK3S-style setups, Titan\/BMG-style extruder mounts, or Voron-style toolheads that are designed around a V6 interface. Pair it with a suitable heater cartridge, temperature sensor, and V6 nozzle for your material.\u003c\/p\u003e\n\u003cp\u003eFor spares and tuning, see our \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-dragonfly-sock\"\u003ePhaetus Dragonfly Sock\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-copper-plated-v6-style-1-75mm-nozzle\"\u003ePhaetus copper-plated V6 nozzles\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6 nozzles\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/heater-cartridge-24v-40w\"\u003e24V 40W heater cartridge\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/thermistor-cartridge\"\u003eRunice high-temperature thermistor cartridge\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eMaterial guide\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGood fit for PLA, PETG, ABS, ASA, TPU, Nylon, PC, PEI, PEEK, and other high-temperature thermoplastics when the rest of the toolhead is built for those temperatures.\u003c\/li\u003e\n\u003cli\u003eFor carbon-fiber, glass-fiber, glow, metal-fill, wood-fill, and other abrasive filaments, use a hardened or otherwise abrasion-resistant V6 nozzle instead of a standard plated copper nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot a Creality-style BMS\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eBMO\u003c\/strong\u003e version for V6-style mounting. If your printer expects the Creality-style Dragonfly BMS heatsink geometry, this is not the drop-in version.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":41053958865065,"sku":"2405842394","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/BMO_1.jpg?v=1696739009"},{"product_id":"v6-threaded-bi-metal-heatbreak","title":"Phaetus V6 Threaded Bi-Metal Heatbreak","description":"\u003cul\u003e\n\u003cli\u003e450℃-rated Bi-Metal Heatbreak melts filament faster and conducts 60% less heatacross the Break Zone than competing Heatbreaks\u003c\/li\u003e\n\u003cli\u003eIt has two components with different thermal conductivity. It is composed of 3 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged\u003c\/li\u003e\n\u003cli\u003eBi-Metal Heatbreak Compatible with E3D Heatsink, E3D Volcano Heat Block, E3D PT100 Volcano Heat Block\u003c\/li\u003e\n\u003cli\u003eCompatible with E3D V6 Heat Block and E3D PT100 V6 Heat Block\u003c\/li\u003e\n\u003cli\u003eCompatible with Prusa I3 MK3\/MK3S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":41265167335593,"sku":"5115055767","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/5115055767.png?v=1696708348"},{"product_id":"phaetus-brass-v6-style-1-75mm-nozzle","title":"Phaetus Brass V6 Style 1.75mm Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGenuine Phaetus brass PS\/V6 nozzle for everyday 1.75 mm printing.\u003c\/strong\u003e This is the standard M6-thread, V6\/RepRap-style brass nozzle for clean PLA, PETG, ABS, ASA, TPU, Nylon, HIPS, PVA, PC and other non-abrasive filament work.\u003c\/p\u003e\n\n\u003ch3\u003eWhy use brass here?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast, stable heat transfer:\u003c\/strong\u003e Phaetus rates the brass nozzle at \u003cstrong\u003e105 W\/m·K\u003c\/strong\u003e thermal conductivity, which keeps normal filament profiles predictable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClean extrusion path:\u003c\/strong\u003e Phaetus specifies inner-hole roughness of \u003cstrong\u003e≤Ra0.4 µm\u003c\/strong\u003e, \u003cstrong\u003e±0.01 mm\u003c\/strong\u003e orifice tolerance, and \u003cstrong\u003e≤0.02 mm\u003c\/strong\u003e concentricity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRight tool for normal plastics:\u003c\/strong\u003e use brass for standard filaments; step up to a \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6 nozzle\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC hardened steel V6 nozzle\u003c\/a\u003e for carbon, glass, glow, metal, wood, or other abrasive-filled materials.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGood inexpensive refresh:\u003c\/strong\u003e a worn nozzle can cause stringing, poor first layers, inconsistent extrusion, and oversized lines. Replacing it is cheaper than chasing slicer settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phaetus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel \/ family:\u003c\/strong\u003e PS (V6), M6 RepRap\/V6 style\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilament diameter:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNozzle sizes:\u003c\/strong\u003e 0.4, 0.5, 0.6, and 0.8 mm variants\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e brass, Mohs hardness \u003cstrong\u003e3\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum printing temperature:\u003c\/strong\u003e \u003cstrong\u003e300 °C\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermal conductivity:\u003c\/strong\u003e \u003cstrong\u003e105 W\/m·K\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner-hole roughness:\u003c\/strong\u003e \u003cstrong\u003e≤Ra0.4 µm\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrifice tolerance:\u003c\/strong\u003e \u003cstrong\u003e±0.01 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcentricity:\u003c\/strong\u003e \u003cstrong\u003e≤0.02 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUse this with V6-style hotends and heater blocks that take a standard M6 RepRap\/V6 nozzle, including Phaetus Dragon\/Dragonfly-class hotends, E3D V6-style blocks, and compatible Mosquito\/Copperhead-style setups. It pairs cleanly with the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-dragonfly-bmo\"\u003ePhaetus Dragonfly BMO\u003c\/a\u003e and the \u003ca href=\"https:\/\/dfh.fm\/products\/v6-threaded-bi-metal-heatbreak\"\u003ePhaetus V6 threaded bi-metal heatbreak\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich size should I pick?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.4 mm:\u003c\/strong\u003e default everyday nozzle size for balanced detail, speed, and profile compatibility.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.5 mm:\u003c\/strong\u003e a small flow bump without jumping all the way to chunky lines.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.6 mm:\u003c\/strong\u003e faster functional prints, stronger walls, and better throughput with common 0.24–0.32 mm layer heights.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.8 mm:\u003c\/strong\u003e large parts, draft work, vase mode, and maximum throughput when fine detail is not the priority.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNot for abrasive-filled filament. Use hardened steel, DLC hardened steel, tungsten carbide, or similar wear-resistant nozzles for carbon\/glass\/glow\/wood\/metal-filled materials.\u003c\/li\u003e\n  \u003cli\u003eNot a Revo nozzle and not a Volcano\/Rapido UHF-length nozzle. Check your hotend thread and nozzle length before ordering.\u003c\/li\u003e\n  \u003cli\u003eInstall and hot-tighten according to your hotend manufacturer’s instructions to avoid leaks between the nozzle and heatbreak.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"0.4","offer_id":42123636900062,"sku":"2440308727","price":6.99,"currency_code":"USD","in_stock":false},{"title":"0.5","offer_id":43287147872478,"sku":"1475834587","price":6.99,"currency_code":"USD","in_stock":true},{"title":"0.6","offer_id":42123636932830,"sku":"2486046798","price":6.99,"currency_code":"USD","in_stock":true},{"title":"0.8","offer_id":42123636965598,"sku":"v3276106658","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/iu_d0273d6c-3fb7-4fac-a642-a9305222d9a1.png?v=1696736874"},{"product_id":"phaetus-copper-plated-v6-style-1-75mm-nozzle","title":"Phaetus Copper Plated V6 Style 1.75mm Nozzle","description":"\u003cp\u003e\u003cstrong\u003ePhaetus plated-copper V6-style nozzle for 1.75 mm filament.\u003c\/strong\u003e A high-conductivity M6 nozzle for V6-style hotends, built for stable extrusion and higher-temperature materials where ordinary brass runs out of thermal headroom.\u003c\/p\u003e\n\u003ch3\u003eWhy pick plated copper over brass?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500°C maximum printing temperature\u003c\/strong\u003e for high-temperature polymers such as PEEK, PEKK, PEI, PSU and PPSU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e330 W\/m·K thermal conductivity\u003c\/strong\u003e helps keep the nozzle tip evenly heated during fast or high-flow printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNickel-plated copper alloy\u003c\/strong\u003e improves smoothness and reduces plastic sticking compared with bare brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRa \u0026lt; 0.4 internal roughness\u003c\/strong\u003e helps keep extrusion consistent through the filament path.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: \u003cstrong\u003ePhaetus\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStyle: \u003cstrong\u003eV6 \/ PS M6\u003c\/strong\u003e nozzle\u003c\/li\u003e\n\u003cli\u003eFilament diameter: \u003cstrong\u003e1.75 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThread: \u003cstrong\u003eM6\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: \u003cstrong\u003eplated copper alloy\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardness: \u003cstrong\u003eMohs 6\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermal conductivity: \u003cstrong\u003e330 W\/m·K\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpansion coefficient: \u003cstrong\u003e16.7 μm\/m·°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum printing temperature: \u003cstrong\u003e500°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUse this anywhere you need a standard V6-style 1.75 mm M6 nozzle, including compatible Phaetus hotends such as the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-dragonfly-bmo\"\u003ePhaetus Dragonfly BMO\u003c\/a\u003e. If you are refreshing a V6 toolhead, pair it with a clean \u003ca href=\"https:\/\/dfh.fm\/products\/v6-threaded-bi-metal-heatbreak\"\u003ePhaetus V6 threaded bi-metal heatbreak\u003c\/a\u003e while the hotend is apart.\u003c\/p\u003e\n\u003ch3\u003eHow to choose\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4 mm\u003c\/strong\u003e is the everyday baseline for PLA, PETG, ABS and ASA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6 mm\u003c\/strong\u003e and \u003cstrong\u003e0.8 mm\u003c\/strong\u003e trade fine detail for higher flow, stronger walls and faster functional prints.\u003c\/li\u003e\n\u003cli\u003eFor ordinary non-abrasive work where cost matters more than temperature headroom, see the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-brass-v6-style-1-75mm-nozzle\"\u003ePhaetus brass V6-style nozzle\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor carbon fiber, glass fiber, glow or other abrasive blends, use a hardened option like the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC hardened steel V6-style nozzle\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cp\u003eThis is not a Volcano-length nozzle and it is not a hardened abrasive-filament nozzle. It is the standard V6 \/ PS M6 plated-copper nozzle for 1.75 mm filament.\u003c\/p\u003e\n\u003cblockquote\u003e“Good nozzles — these are my daily drivers… Copper plated means it’s got great conductivity.”\u003c\/blockquote\u003e","brand":"Phaetus","offers":[{"title":"0.4","offer_id":42123641553118,"sku":"7394235247","price":12.99,"currency_code":"USD","in_stock":true},{"title":"0.05","offer_id":44747815616734,"sku":"4665637331","price":12.99,"currency_code":"USD","in_stock":true},{"title":"0.6","offer_id":42123641585886,"sku":"6184044223","price":12.99,"currency_code":"USD","in_stock":true},{"title":"0.8","offer_id":42123641618654,"sku":"4938091458","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/iu_ec1b12c4-9cca-4df6-a76a-3d484ce870ca.png?v=1696737014"},{"product_id":"phaetus-hardened-steel-v6-style-1-75mm-nozzle","title":"Phaetus Hardened Steel V6 Style 1.75mm Nozzle","description":"\u003cp\u003e\u003cstrong\u003ePhaetus PS (V6) hardened steel nozzle for 1.75 mm filament.\u003c\/strong\u003e A drop-in M6\/V6-style wear-resistant nozzle for abrasive composites like carbon-fiber, glass-fiber, wood-fill, glow, and other filled materials.\u003c\/p\u003e\n\u003ch3\u003eWhy use hardened steel here?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened tool steel\u003c\/strong\u003e resists bore wear from abrasive filaments that quickly enlarge a brass nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e450℃ maximum printing temperature\u003c\/strong\u003e covers common engineering and composite filament use cases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e≤Ra0.4 μm inner-hole roughness\u003c\/strong\u003e and \u003cstrong\u003e≤0.02 mm concentricity\u003c\/strong\u003e help keep extrusion consistent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand \/ series: \u003cstrong\u003ePhaetus PS (V6) Hardened Steel Nozzle\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFilament diameter: \u003cstrong\u003e1.75 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle thread\/style: \u003cstrong\u003eM6 V6-style \/ PS\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAvailable orifice sizes here: \u003cstrong\u003e0.4, 0.5, 0.6, 0.8, and 1.0 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardness: \u003cstrong\u003eover HRC60\u003c\/strong\u003e \/ Mohs \u003cstrong\u003e7.8\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum printing temperature: \u003cstrong\u003e450℃\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermal conductivity: \u003cstrong\u003e22 W\/m·K\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufacturer family \/ adaptation model: \u003cstrong\u003e1100-PS-HS\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and use\u003c\/h3\u003e\n\u003cp\u003eUse this on hotends that take standard V6-style M6 nozzles, including Phaetus Dragon\/Dragonfly-style V6 setups and other compatible E3D V6 ecosystem heater blocks. It is the practical upgrade when printing abrasive materials like PET-CF, PA-CF, ABS-GF, ASA-GF, wood-fill, glow, or metal-filled filament.\u003c\/p\u003e\n\u003ch3\u003eChoosing the size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4 mm\u003c\/strong\u003e: general-purpose replacement when you need abrasion resistance without changing your normal profile much.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.5–0.6 mm\u003c\/strong\u003e: better flow and stronger parts for filled engineering materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8–1.0 mm\u003c\/strong\u003e: faster, heavier extrusion for large functional parts and abrasive filaments that dislike tiny bores.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated options\u003c\/h3\u003e\n\u003cp\u003eFor non-abrasive everyday filament, use the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-brass-v6-style-1-75mm-nozzle\"\u003ePhaetus Brass V6 Style 1.75 mm Nozzle\u003c\/a\u003e. For higher thermal conductivity, step to the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-copper-plated-v6-style-1-75mm-nozzle\"\u003ePhaetus Copper Plated V6 Style 1.75 mm Nozzle\u003c\/a\u003e. For a longer-life coated wear nozzle, compare the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC Hardened Steel V6 Style 1.75 mm Nozzle\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel conducts heat less efficiently than brass, so abrasive-material profiles may need a small temperature or flow tune.\u003c\/li\u003e\n\u003cli\u003eThis is \u003cstrong\u003enot\u003c\/strong\u003e a Volcano\/PH-length nozzle and is \u003cstrong\u003enot\u003c\/strong\u003e for Revo hotends.\u003c\/li\u003e\n\u003cli\u003eMatch the orifice size to your slicer profile before printing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"0.4","offer_id":42123658559710,"sku":"4102866795","price":12.99,"currency_code":"USD","in_stock":true},{"title":"0.5","offer_id":44129365164254,"sku":"1781991749","price":12.99,"currency_code":"USD","in_stock":true},{"title":"0.6","offer_id":42123658592478,"sku":"4591652232","price":12.99,"currency_code":"USD","in_stock":true},{"title":"0.8","offer_id":42123658625246,"sku":"8760075792","price":12.99,"currency_code":"USD","in_stock":true},{"title":"1","offer_id":44747815583966,"sku":"6955789013","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/iu_b6826796-fcdc-4056-93cc-6b232f43e0da.png?v=1696739341"},{"product_id":"phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle","title":"Phaetus DLC Hardened Steel V6 Style 1.75mm Nozzle","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIn 3D printing filaments, composite consumables containing abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten and phosphorescent pigments are often very hard.The use of ordinary nozzle printing, will soon wear holes and inner diameter, destroying the original performance of the nozzle.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAnd Mohs type hardness of the hardened steel nozzle is 7.8, the highest printing temperature is 450℃, with high wear resistance, high temperature resistance. The hardened steel nozzle is the user's first choice for printing high strength filaments!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eHardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials;\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTemperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK;\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole;\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eInner hole roughness lower than Ra0.4; Higher smoothness and less adhesion;\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMin. diameter of hole 0.1mm\/±0.01mm in experimental level application, making sure high accuracy printing;\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHigh quality imported die steel material ensures the stability of performance.\u003c\/span\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"0.4","offer_id":42123681136862,"sku":"1267663720","price":29.99,"currency_code":"USD","in_stock":true},{"title":"0.5","offer_id":44130219196638,"sku":"3457709875","price":29.99,"currency_code":"USD","in_stock":true},{"title":"0.6","offer_id":42123681169630,"sku":"4555684610","price":26.99,"currency_code":"USD","in_stock":true},{"title":"0.8","offer_id":42123681202398,"sku":"5006088094","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/iu_84f73636-cf51-4cf0-b84a-a6b8e7c3046b.png?v=1696737652"},{"product_id":"phaetus-dragonfly-sock","title":"Phaetus Dragonfly Sock","description":"\u003cp\u003e\u003cstrong\u003eReplacement silicone sock for the Phaetus Dragonfly BMS\/BMO heater block.\u003c\/strong\u003e This black Phaetus sock insulates the hotend block, helps stabilize temperature, and keeps melted filament off the block during normal printing.\u003c\/p\u003e\n\u003ch3\u003eWhy use it\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCleaner hotend maintenance:\u003c\/strong\u003e the non-stick silicone cover helps keep plastic buildup off the heater block.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMore stable heat:\u003c\/strong\u003e insulating the block reduces heat loss and helps the hotend hold temperature more consistently.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop-in spare:\u003c\/strong\u003e shaped for Phaetus Dragonfly BMS and BMO heater blocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phaetus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e PH-3035-01A-00-0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e high-temperature silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum listed sock temperature:\u003c\/strong\u003e 280°C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Phaetus Dragonfly BMS and \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-dragonfly-bmo\"\u003ePhaetus Dragonfly BMO\u003c\/a\u003e hotends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse this for the standard Dragonfly BMS\/BMO block shape.\u003c\/li\u003e\n  \u003cli\u003eFor higher-temperature Dragonfly service, see the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-dragonfly-high-temperature-sock\"\u003ePhaetus Dragonfly High Temperature Sock\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eNot for Phaetus Dragon, Rapido, or other hotend block shapes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":42126343045342,"sku":"5532332462","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/CD499814-CAE3-4A37-A4FA-875810C8BA71_b9fecfc0-de1e-40ee-9e06-337dc2e078b4.png?v=1696739277"},{"product_id":"phaetus-rapido-high-temperature-sock","title":"Phaetus Rapido High Temperature Sock","description":"\u003cp\u003e\u003cstrong\u003eReplacement high-temperature silicone sock for original Phaetus Rapido HF and UHF hotends.\u003c\/strong\u003e Choose the HF or UHF variant to match your Rapido 1 heatblock; the sock insulates the heater block, helps keep melted filament off the metal, and steadies temperature when part cooling is blowing across the nozzle.\u003c\/p\u003e\n\u003ch3\u003eWhy use a Rapido sock?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKeeps the heatblock cleaner:\u003c\/strong\u003e non-stick silicone helps reduce burnt or blackened plastic buildup around the block and nozzle area.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproves thermal stability:\u003c\/strong\u003e the sock keeps heat in the hotend instead of letting part-cooling airflow pull it away from the block.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduces heat radiating into the print:\u003c\/strong\u003e useful for overhangs, bridges, and sticky materials such as co-polyesters or filled composites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phaetus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e original Phaetus Rapido \/ Rapido 1 hotends, HF or UHF depending on selected option\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e HF sock or UHF sock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e heat-resistant, non-stick silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGTIN\/EAN:\u003c\/strong\u003e HF 6973090162221; UHF 6973090162238\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePick the right version\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHF:\u003c\/strong\u003e for the shorter Rapido HF heatblock.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF:\u003c\/strong\u003e for the longer Rapido UHF heatblock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot for Rapido 2\u003c\/h3\u003e\n\u003cp\u003eThis listing is for the original Rapido 1-style HF\/UHF sock. Rapido 1 and Rapido 2 socks are different; if you need the Rapido 2 UHF version, use the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2-high-temp-silicone-sock-uhf\"\u003ePhaetus Rapido 2 High Temp Silicone Sock UHF\u003c\/a\u003e.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"HF","offer_id":43679633309918,"sku":"7999115617","price":10.0,"currency_code":"USD","in_stock":true},{"title":"UHF","offer_id":43679633342686,"sku":"7999115616","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0779.png?v=1643784150"},{"product_id":"phaetus-dragon-high-temperature-sock","title":"Phaetus Dragon High Temperature Sock","description":"\u003cp\u003e\u003cstrong\u003eReplacement high-temperature silicone sock for the Phaetus Dragon SF\/HF heater block.\u003c\/strong\u003e This black heater-block cover insulates the hotend, helps keep nozzle temperature steadier, and reduces melted-filament buildup on compatible Dragon hotends.\u003c\/p\u003e\n\u003ch3\u003eWhy use it\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCleaner hotend maintenance:\u003c\/strong\u003e silicone helps keep stray filament off the heater block and nozzle area.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMore stable heat:\u003c\/strong\u003e insulating the block reduces heat loss so the hotend can hold temperature more consistently.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop-in spare:\u003c\/strong\u003e shaped for Phaetus Dragon SF\/HF-style heater blocks; keep one on hand before the original sock tears or carbonizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phaetus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Dragon silicone heater-block sock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Phaetus Dragon SF\/HF hotends\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e high-temperature silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 sock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse this for the standard Dragon SF\/HF block shape, not Dragonfly, Rapido, UHF, or other hotend blocks.\u003c\/li\u003e\n  \u003cli\u003ePairs with compatible V6-style nozzles such as the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-brass-v6-style-1-75mm-nozzle\"\u003ePhaetus Brass V6 Style Nozzle\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-copper-plated-v6-style-1-75mm-nozzle\"\u003ePhaetus Copper Plated V6 Style Nozzle\u003c\/a\u003e, and \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus Hardened Steel V6 Style Nozzle\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eDo not rely on the sock to make an incorrectly assembled hotend safe; verify heater, thermistor, and PID tuning after replacement.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":42420237828318,"sku":"9547174127","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/2AABD45C-1509-462E-BAD8-D63274A6DD39_066baea1-ba63-42a6-893b-cf93598ad1df.png?v=1696738252"},{"product_id":"high-temperature-heater-cartridge","title":"50w High Temperature Heater Cartridge","description":"\u003ch4\u003eRunice heater cartrige.\u003c\/h4\u003e\n\u003cp\u003eReinforced fiberglass outer layer, embedded into the heating element, unlike lesser quality heaters which break away the sleeve from the heater after some amount of use.\u003c\/p\u003e\n\u003cp\u003eOne meter long. Ends terminated into ferrules.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":42857902866654,"sku":"1419713996","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_1811.png?v=1653335547"},{"product_id":"phaetus-dragonfly-high-temperature-sock","title":"Phaetus Dragonfly High Temperature Sock","description":"\u003cp\u003eGood up to 370c\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":43360763150558,"sku":"3848690839","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/CD499814-CAE3-4A37-A4FA-875810C8BA71_50d4f23d-4c69-45d8-a928-b39db7efcb51.png?v=1696739195"},{"product_id":"nozzles-for-phaetus-dropeffect-xg-hotend","title":"Nozzles for Phaetus\/DropEffect XG hotend","description":"\u003cp\u003e\u003cstrong\u003eReplacement M4 nozzles for the Phaetus\/DropEffect XG hotend\u003c\/strong\u003e in 1.75 mm filament sizes. Choose brass for everyday materials, hardened steel for abrasive blends, or plated copper when you want better heat transfer and a cleaner exterior surface.\u003c\/p\u003e\n\u003ch3\u003eWhy this over a standard V6 nozzle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe DropEffect XG uses an \u003cstrong\u003eM4 threaded nozzle\u003c\/strong\u003e; standard V6\/M6 nozzles are not the right fit.\u003c\/li\u003e\n\u003cli\u003eAvailable here in the common XG sizes: \u003cstrong\u003e0.4 mm\u003c\/strong\u003e, \u003cstrong\u003e0.6 mm\u003c\/strong\u003e, and \u003cstrong\u003e0.8 mm\u003c\/strong\u003e for \u003cstrong\u003e1.75 mm\u003c\/strong\u003e filament.\u003c\/li\u003e\n\u003cli\u003eMaterial choices match the job: brass for PLA\/PETG\/ABS\/ASA\/TPU, hardened steel for carbon- or glass-filled abrasive filament, plated copper for higher thermal response and reduced plastic buildup versus bare brass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ ecosystem:\u003c\/strong\u003e Phaetus \/ DropEffect XG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameters:\u003c\/strong\u003e 0.4 mm, 0.6 mm, 0.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e brass, hardened steel, plated copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e replacement nozzle for DropEffect XG hotend installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to pick\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrass:\u003c\/strong\u003e best default for non-abrasive filament and normal print temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel:\u003c\/strong\u003e use for PA-CF, PET-CF, glow, glass-filled, and other abrasive blends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlated copper:\u003c\/strong\u003e use when you want stronger heat transfer than hardened steel and an easier-to-clean plated surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4 mm:\u003c\/strong\u003e detail\/default; \u003cstrong\u003e0.6 mm:\u003c\/strong\u003e faster everyday printing; \u003cstrong\u003e0.8 mm:\u003c\/strong\u003e coarse, high-throughput prints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and related parts\u003c\/h3\u003e\n\u003cp\u003eThese nozzles are for the Phaetus\/DropEffect XG hotend ecosystem. If you are refreshing the whole hotend, the live companion part in the shop is the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-dropeffect-high-temperature-m4-threaded-thermistor\"\u003ePhaetus\/DropEffect high-temperature M4 threaded thermistor\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a V6\/M6 nozzle. Do not buy this for Dragon, Dragonfly, Rapido, or other standard V6-style hotends unless your setup specifically uses the DropEffect XG M4 nozzle format.\u003c\/li\u003e\n\u003cli\u003eMatch nozzle material to filament: brass wears quickly with abrasive filled filaments.\u003c\/li\u003e\n\u003cli\u003eInstall hot and torque gently according to your hotend service routine; small M4 nozzles are easier to over-tighten than larger V6-style nozzles.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"XG M4 Threaded Brass Nozzle 0.4\/1.75mm","offer_id":43380588609758,"sku":"8320589597","price":7.99,"currency_code":"USD","in_stock":false},{"title":"XG M4 Threaded Brass Nozzle 0.6\/1.75mm","offer_id":43380588642526,"sku":"1931609937","price":7.99,"currency_code":"USD","in_stock":false},{"title":"XG M4 Threaded Brass Nozzle 0.8\/1.75mm","offer_id":43380588675294,"sku":"3191122147","price":7.99,"currency_code":"USD","in_stock":false},{"title":"XG M4 Threaded Hardened Steel Nozzle 0.4\/1.75mm","offer_id":43380588708062,"sku":"9528272413","price":7.99,"currency_code":"USD","in_stock":false},{"title":"XG M4 Threaded Hardened Steel Nozzle 0.6\/1.75mm","offer_id":43380588740830,"sku":"2838444954","price":7.99,"currency_code":"USD","in_stock":false},{"title":"XG M4 Threaded Hardened Steel Nozzle 0.8\/1.75mm","offer_id":43380588773598,"sku":"9641778176","price":7.99,"currency_code":"USD","in_stock":true},{"title":"XG M4 Threaded Plated Copper Nozzle 0.4\/1.75mm","offer_id":43380588806366,"sku":"9838094817","price":7.99,"currency_code":"USD","in_stock":true},{"title":"XG M4 Threaded Plated CopperNozzle 0.6\/1.75mm","offer_id":43380588839134,"sku":"9738292614","price":7.99,"currency_code":"USD","in_stock":true},{"title":"XG M4 Threaded Plated Copper Nozzle 0.8\/1.75mm","offer_id":43380588871902,"sku":"9664953204","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/ScreenShot2022-09-09at1.12.29PM.png?v=1696798837"},{"product_id":"60w-high-temperature-heater-cartridge","title":"60w High Temperature Heater Cartridge","description":"\u003ch4\u003eRunice heater cartrige.\u003c\/h4\u003e\n\u003cp\u003eReinforced fiberglass outer layer, embedded into the heating element, unlike lesser quality heaters which break away the sleeve from the heater after some amount of use.\u003c\/p\u003e\n\u003cp\u003eOne meter long. Ends terminated into ferrules.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":43499839422686,"sku":"1401313540","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_1811_2d2b402d-32bb-4e4f-9b64-01d298567f98.png?v=1665195908"},{"product_id":"2510-axial-fan-by-phaetus","title":"2510 Axial Fan by Phaetus","description":"\u003cp\u003e24V 25x25x10mm axial fan. This is the fan that ships with the Phaetus\/DropEffect XG hotend, and it's also used with the Corvidbuilds XOL2 toolhead. Useful as a direct replacement on either, or wherever a 2510 24V axial fan is needed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 25 x 25 x 10mm (2510)\u003c\/li\u003e\n\u003cli\u003eVoltage: 24V DC\u003c\/li\u003e\n\u003cli\u003eType: axial fan\u003c\/li\u003e\n\u003cli\u003eStock fan for the Phaetus \/ DropEffect XG hotend\u003c\/li\u003e\n\u003cli\u003eAlso used on the Corvidbuilds XOL2 toolhead\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":43502513422558,"sku":"3107670600","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_3150.jpg?v=1665286709"},{"product_id":"phaetus-aeforce-pet-gf-filament","title":"Phaetus aeForce™ PET-GF Filament 1kg Spool","description":"\u003cp\u003e1kg spool of \u003cstrong\u003e15% glass-filled PET\u003c\/strong\u003e (1.75mm) — an engineering-grade step up from ordinary PETG. The chopped glass fiber adds stiffness, creep resistance and dimensional stability, and it \u003cstrong\u003eanneals without warping\u003c\/strong\u003e for parts that need that extra strength. PET also runs hotter and tougher than PETG while still printing fine in open air.\u003c\/p\u003e\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cp\u003eFunctional parts: brackets, jigs, fixtures, motor\/sensor mounts, mechanical components that see moderate heat and load. Low moisture-pickup-rate, good chemical resistance, low warp\/shrink. Not a cosmetic filament — glass fill gives a matte, slightly rough finish.\u003c\/p\u003e\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA hardened nozzle is mandatory.\u003c\/strong\u003e Glass-filled material is abrasive and will chew through plated copper or brass in mere meters. Run a hardened steel, DLC-coated, tungsten-carbide, or ruby nozzle. If you don't have one, add one to the cart now — this is not optional with GF filament.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e280-320℃ — hardened\/DLC\/tungsten-carbide\/ruby required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60-80℃ — PEI with a release agent (see \u003ca href=\"https:\/\/dfh.fm\/products\/goo-by-frank-af\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egoo.by.frank.af\u003c\/a\u003e; helps your bed survive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot required — prints open air. Ventilate the room; GF\/PET can release VOCs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30-90 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry before use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePET is thirsty. If the spool has sat open, dry it (~70-80℃ for several hours) before printing — wet PET-GF prints stringy and weak.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eLiquidation stock — priced to move. Engineering filament has a shelf life once it picks up moisture; if you've got a use for tough glass-filled PET, grab it.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":43711476662494,"sku":"5378994134","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":43711476695262,"sku":"1884797130","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":44035869671646,"sku":"6107118823","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":44035869704414,"sku":"8390093854","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":44035869737182,"sku":"9242950565","price":41.24,"currency_code":"USD","in_stock":false},{"title":"Beige","offer_id":44515192766686,"sku":"5417307346","price":41.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Screenshot2022-12-01at1.25.17PM.jpg?v=1669931381"},{"product_id":"phaetus-aeworthy™-abs-gf-filament","title":"Phaetus aeWorthy™ ABS-GF Filament 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeWorthy ABS-GF\u003c\/strong\u003e is an ABS engineering filament reinforced with \u003cstrong\u003e10% chopped glass fiber\u003c\/strong\u003e. The glass loading raises stiffness and dimensional stability and cuts the warping you fight with plain ABS, while keeping ABS's toughness and chemical resistance. It also runs with noticeably lower odor than typical ABS. Good fit for functional parts, brackets, jigs, fixtures, enclosures, and printer components that need to stay flat and hold tolerance in a heated chamber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec (Phaetus TDS):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase polymer: ABS + 10% glass fiber\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm  |  Spool: 1kg\u003c\/li\u003e\n\u003cli\u003eNozzle temp: 250-270°C\u003c\/li\u003e\n\u003cli\u003eBed temp: 100-110°C\u003c\/li\u003e\n\u003cli\u003eDensity: 1.10 g\/cm³ (ISO 1183)\u003c\/li\u003e\n\u003cli\u003eGlass transition: 101°C  |  Vicat softening: 106°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware you need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened nozzle required.\u003c\/strong\u003e Glass fiber is abrasive and will chew through a brass nozzle in a few hundred grams. Run a hardened steel, DLC-coated, tungsten carbide, or ruby nozzle. A 0.4mm or larger hardened nozzle is the safe default. (See our hardened \/ tungsten-carbide nozzles to pair with this spool.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosed printer.\u003c\/strong\u003e ABS-GF warps and delaminates in a cold draft, and printing ABS plus glass fiber releases VOCs\/particulates — print enclosed, in a ventilated room, ideally with filtration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry before use.\u003c\/strong\u003e ABS-GF is hygroscopic; absorbed moisture shows up as stringing, surface fuzz, and weak layer bonding. If the spool has been open or sitting, dry it (roughly 70-80°C for 4-6 hours) and print from a dry box for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a real engineering material, not a decorative filament — expect a matte, slightly textured finish and parts that are stiffer and more stable than standard ABS.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44035779494110,"sku":"8130764865","price":21.99,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":44035779526878,"sku":"5538077090","price":21.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":44035794010334,"sku":"5258720071","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":44035794043102,"sku":"4235589566","price":21.99,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":44200562262238,"sku":"2075573280","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":44319777226974,"sku":"4918086245","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/phaetus_filament_box_86526fdf-7ee2-4114-b767-714b4ca86bfe.png?v=1696737335"},{"product_id":"phaetus-aeworthy™-asa-gf-filament","title":"Phaetus aeWorthy™ ASA-GF Filament 1kg Spool","description":"\u003ch3\u003ePhaetus aeWorthy ASA-GF — glass-fiber reinforced ASA, 1.75mm, 1kg\u003c\/h3\u003e\n\u003cp\u003eASA reinforced with 10% chopped glass fiber. You get ASA's real strengths — UV stability and weather resistance for parts that live outdoors — plus the stiffness, dimensional stability and low-warp behavior the glass fiber adds. Phaetus also tunes this for lower odor than standard ASA, which is welcome on long prints. The finish is a matte, slightly textured \"carbon-fiber-look\" surface that hides layer lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it prints well:\u003c\/strong\u003e functional outdoor parts, automotive trim and brackets, enclosures, jigs, and larger models where plain ASA would warp. It is not a cosmetic high-gloss material — it is an engineering filament that trades shine for stiffness and stability.\u003c\/p\u003e\n\u003ch4\u003ePrint settings (Phaetus)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 250-270°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 100-110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e required. ASA cracks and delaminates in a draft, and it releases styrene VOCs — run it in an enclosure in a ventilated room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHardware you need\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis filament is abrasive — a hardened nozzle is required.\u003c\/strong\u003e Glass fiber will wear out a standard brass nozzle in a few spools and your dimensional accuracy goes with it. Run a hardened steel, DLC-coated, tungsten carbide, or ruby nozzle. If you do not already have one, add a hardened nozzle to your order before you load this — it is not optional with GF filament.\u003c\/p\u003e\n\u003ch4\u003eDrying\u003c\/h4\u003e\n\u003cp\u003eASA absorbs moisture over time. If the spool has been open, or you see stringing, steam, or popping at the nozzle, dry it (roughly 70-80°C for 4-6 hours in a filament dryer) before printing. Store it sealed with desiccant between uses.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: one reseller lists the glass-fiber content as 15-20%; Phaetus's own spec states 10%. We list it as Phaetus states it.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44035837362398,"sku":"9965777866","price":26.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":44200560197854,"sku":"3067069719","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":44200560230622,"sku":"6412854764","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/asa-gf-square.jpg?v=1679137355"},{"product_id":"phaetus-rapido-titanium-screw-m1-6-11","title":"Phaetus Rapido Titanium Screw M1.6*11","description":"\u003cp\u003e\u003cstrong\u003eGenuine Phaetus Rapido titanium replacement screw\u003c\/strong\u003e for Rapido hotend service work, sized \u003cstrong\u003eM1.6x11\u003c\/strong\u003e and sold individually.\u003c\/p\u003e\n\u003ch3\u003eWhy this over a generic screw\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium hardware\u003c\/strong\u003e keeps heat transfer lower than ordinary steel in hotend assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrect small-format size:\u003c\/strong\u003e M1.6x11 for Rapido replacement use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBagged Phaetus spare\u003c\/strong\u003e with Rapido labeling, not loose mixed-bin hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: \u003cstrong\u003ePhaetus\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct: \u003cstrong\u003eRapido Titanium Screw\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: \u003cstrong\u003eM1.6x11\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: \u003cstrong\u003etitanium\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuantity: \u003cstrong\u003e1 screw\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and use\u003c\/h3\u003e\n\u003cp\u003eUse this when servicing a Phaetus Rapido-family hotend that needs the M1.6x11 titanium screw. It pairs with the live \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2\"\u003ePhaetus Rapido 2\u003c\/a\u003e lineup and Rapido hotend spare parts.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is \u003cstrong\u003eone replacement screw only\u003c\/strong\u003e, not a full hotend, heat block, sock, or screw kit.\u003c\/li\u003e\n\u003cli\u003eMatch the screw location and length on your hotend before installing; tiny hotend screws are easy to mix up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Important to get titanium.”\u003c\/blockquote\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44106609950942,"sku":"9034674945","price":2.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_43342.png?v=1696708919"},{"product_id":"phaetus-dragon-titanium-screw-m1-4-10-5-2-3","title":"Phaetus Dragon Titanium Screw M1.4*10.5*2.3","description":"\u003cp\u003e\u003cstrong\u003eReplacement titanium support screw for the Phaetus Dragon UHF hotend.\u003c\/strong\u003e This is the Phaetus Dragon UHF titanium screw in \u003cstrong\u003eM1.4 × 10.5 × 2.3 mm\u003c\/strong\u003e, used as a low-thermal-conductivity support fastener in the Dragon UHF hotend assembly.\u003c\/p\u003e\n\u003ch3\u003eWhy titanium here\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow heat transfer:\u003c\/strong\u003e Phaetus documents the Dragon UHF with titanium alloy support screws to reduce conduction between the hot side and cold side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-style spare:\u003c\/strong\u003e for replacing a damaged or missing Dragon UHF support screw rather than improvising with a generic steel fastener.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDragon UHF fit:\u003c\/strong\u003e sold as a Dragon UHF spare; it is not the Rapido screw size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: \u003cstrong\u003ePhaetus\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePart: \u003cstrong\u003eDragon UHF titanium support screw\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: \u003cstrong\u003eM1.4 × 10.5 × 2.3 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: \u003cstrong\u003etitanium alloy\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse: replacement support screw for the \u003cstrong\u003ePhaetus Dragon UHF hotend\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and related parts\u003c\/h3\u003e\n\u003cp\u003eUse this when servicing a Dragon UHF hotend. If you are refreshing the hotend at the same time, pair it with a compatible \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-brass-v6-style-1-75mm-nozzle\"\u003ePhaetus V6-style 1.75 mm nozzle\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eNot for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRapido hotends — use the Rapido titanium screw size instead.\u003c\/li\u003e\n\u003cli\u003eGeneric M1.4 hardware applications where head style, shoulder, or length is different.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44106679943390,"sku":"3429660360","price":2.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_43352.png?v=1696738483"},{"product_id":"phaetus-aecoating™-nexabs-gf25","title":"Phaetus aeCoating™ NexABS-GF25","description":"\u003ch3\u003ePhaetus aeCoating NexABS-GF25 — 25% glass-fiber ABS, 1kg \/ 1.75mm\u003c\/h3\u003e\n\u003cp\u003eA glass-fiber-reinforced ABS engineering filament. What makes the aeCoating line different is its \u003cstrong\u003eco-extrusion \"skin-core\" structure\u003c\/strong\u003e: the core is ABS loaded with 25% chopped glass fiber for stiffness and dimensional stability, and it's wrapped in a skin of unfilled ABS. The practical result is the warp resistance and rigidity you want from a GF-filled material, but with the \u003cstrong\u003einterlayer bonding restored\u003c\/strong\u003e by the unfilled skin — and a clean matte finish with no fiber strands floating on the surface.\u003c\/p\u003e\n\u003cp\u003eUse it where plain ABS isn't stiff enough or warps too much: brackets, jigs and fixtures, motor mounts, enclosures, and functional parts that see heat and load.\u003c\/p\u003e\n\u003ch4\u003ePrint settings (Phaetus published)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle \/ print temp:\u003c\/strong\u003e 250–270°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temp:\u003c\/strong\u003e 100–110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild surface:\u003c\/strong\u003e PEI or PC film, smooth or textured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e recommended — this is an ABS-based resin, so an enclosed\/draft-free chamber prevents warping and layer cracking on larger parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter \/ weight:\u003c\/strong\u003e 1.75mm, 1kg spool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHardware you need\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis filament is abrasive.\u003c\/strong\u003e The 25% glass fiber will chew through a brass nozzle quickly. Phaetus and resellers specify a \u003cstrong\u003ehardened steel, DLC-coated, tungsten-carbide, or ruby nozzle\u003c\/strong\u003e — run one or your nozzle geometry (and print quality) degrades within a spool. A 0.4mm or larger hardened nozzle is the safe default.\u003c\/p\u003e\n\u003ch4\u003eDrying\u003c\/h4\u003e\n\u003cp\u003eGlass-fiber ABS absorbs moisture. If the spool has been open or sitting, \u003cstrong\u003edry it before printing\u003c\/strong\u003e (roughly 60–70°C for several hours in a filament dryer) — wet GF-ABS prints rough, weak, and stringy.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHonest note:\u003c\/em\u003e this is a stiff, heat-tolerant engineering material, not a beginner filament. Plan for an enclosure, a hardened nozzle, and dry storage and it rewards you with strong, low-warp functional parts.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44200562589918,"sku":"4861693496","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":44200562622686,"sku":"3802902632","price":29.99,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":44200562688222,"sku":"9399083561","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":44200562720990,"sku":"9717219184","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":44317415342302,"sku":"3555508129","price":29.99,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":44317417111774,"sku":"8148114697","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/phaetus_filament_box_2c12be10-55c7-42c5-8584-a9c342e33e50.png?v=1696712313"},{"product_id":"phaetus-aeforce™-paht-cf","title":"Phaetus aeForce™ PAHT-CF","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeForce PAHT-CF\u003c\/strong\u003e is a high-temperature nylon reinforced with 15% chopped carbon fiber. It is an engineering filament for functional parts that need to stay stiff and dimensionally stable when they get hot or take load — gears, brackets, mounts, tooling, drone and RC parts, end-use mechanical components. This is the high-temp grade: it runs hotter and resists more heat than the common PA12-based \"PAHT-CF\" you see at hobby prices.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat it prints well:\u003c\/strong\u003e rigid, low-warp parts with a matte carbon finish. The carbon fiber forms a mesh skeleton through the matrix, so prints come off the bed with good dimensional stability and minimal warpage for a nylon. The base resin is a modified high-temp nylon with low moisture sensitivity (saturated absorption ~1.37%, roughly a tenth of plain PA6), so mechanical properties hold up far better than standard nylon once parts are in service.\u003c\/p\u003e\n\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened nozzle, non-negotiable.\u003c\/strong\u003e Carbon fiber is abrasive and will chew a brass nozzle in a few hundred grams. Run a hardened-steel, DLC-coated, tungsten-carbide, or ruby nozzle. Phaetus specs hardened steel or above, with a heating block of at least 12mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temp all-metal hotend.\u003c\/strong\u003e Nozzle temperature is \u003cstrong\u003e300-320°C\u003c\/strong\u003e — above what many stock hotends and PTFE-lined setups can handle. Plan for an all-metal hotend rated to these temps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure recommended.\u003c\/strong\u003e Helps with warp control at these temperatures and contains fumes — print in a well-ventilated space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrint settings (from Phaetus's TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle: 300-320°C\u003c\/li\u003e\n\u003cli\u003eBed: 70-90°C, PEI sheet or a coat of PVP glue stick\u003c\/li\u003e\n\u003cli\u003ePart cooling fan: OFF\u003c\/li\u003e\n\u003cli\u003ePrint speed: 30-120 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity 1.20 g\/cm3; melt point 237°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDrying — read this before you print\u003c\/h3\u003e\n\u003cp\u003eNylon absorbs water from the air. Wet filament prints with stringing, popping\/bubbling extrusion, and a rough surface. Dry the spool at \u003cstrong\u003e80-100°C for 4-6 hours\u003c\/strong\u003e and feed it straight from a dry box held below 15% RH. Reseal unused filament in its foil bag. Even though this grade is low-moisture for a nylon, it still needs dry handling for clean prints.\u003c\/p\u003e\n\n\u003ch3\u003eOptional: annealing\u003c\/h3\u003e\n\u003cp\u003eAnnealing finished parts at 80-100°C for 4-8 hours (then cooling naturally) further raises strength and heat resistance — HDT climbs from ~82°C as-printed toward ~190°C annealed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eSpool: 1kg net, 1.75mm, black. Pairs with a hardened nozzle and a filament dryer\/dry box — see related items.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44200721973470,"sku":"1640167404","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/phaetus_filament_box_305e28d7-5fd0-4f84-aff5-84dc700b8a37.png?v=1696737177"},{"product_id":"phaetus-rapido-2","title":"Phaetus Rapido 2","description":"\u003cp\u003e\u003cstrong\u003ePhaetus Rapido 2 is a compact, fast-heating hotend family for high-flow 1.75 mm printing.\u003c\/strong\u003e This black 24V listing covers HF and UHF builds, with standard Rapido Hotend 2 280 °C variants and Rapido Plus Hotend 2 350 °C PT1000 variants.\u003c\/p\u003e\n\u003ch3\u003eWhy choose Rapido 2?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTitanium heatbreak\u003c\/strong\u003e for thermal isolation and less heat creep than the original stainless heatbreak design.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum heatsink + plated-copper extended heatblock\u003c\/strong\u003e for a longer melt zone and fast temperature response.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHF and UHF options\u003c\/strong\u003e let you choose a shorter high-flow setup or the longer ultra-high-flow configuration when your toolhead clearance allows it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable temperature sensor\u003c\/strong\u003e makes service simpler: 104NT on the 280 °C Rapido Hotend 2, PT1000 on the 350 °C Rapido Plus Hotend 2.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne-handed nozzle-change design\u003c\/strong\u003e with titanium alloy support screws to keep the heater block rigid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phaetus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilament:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow options:\u003c\/strong\u003e HF \/ UHF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature options:\u003c\/strong\u003e Rapido Hotend 2 280 °C with 104NT sensor; Rapido Plus Hotend 2 350 °C with PT1000 sensor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e aluminum heatsink, titanium heatbreak, plated-copper heatblock, titanium alloy support screws\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNozzle ecosystem:\u003c\/strong\u003e V6-style nozzle compatible; pair with \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-copper-plated-v6-style-1-75mm-nozzle\"\u003ePhaetus plated-copper V6 nozzles\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened-steel V6 nozzles\u003c\/a\u003e for spares.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachine fitment and use\u003c\/h3\u003e\n\u003cp\u003eRapido 2 is a strong fit for high-speed CoreXY builds and Voron-style toolheads where a Phaetus\/Rapido mount is supported. It is commonly chosen for Voron V2.4, Trident, Switchwire, custom Klipper printers, and other machines that need more melt capacity without moving to a full toolhead swap. Keep a matching spare sock on hand: \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2-high-temp-silicone-sock-hf\"\u003eRapido 2 HF silicone sock\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2-high-temp-silicone-sock-uhf\"\u003eRapido 2 UHF silicone sock\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow to choose\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHF:\u003c\/strong\u003e choose this for a compact high-flow hotend when you want the simplest fit and do not need the longest melt zone.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF:\u003c\/strong\u003e choose this when you are chasing higher volumetric flow and your toolhead has room for the longer setup.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e280 °C \/ 104NT:\u003c\/strong\u003e choose standard Rapido Hotend 2 for common engineering plastics within its temperature range.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e350 °C \/ PT1000 Plus:\u003c\/strong\u003e choose Rapido Plus Hotend 2 for higher-temperature materials and PT1000 sensor support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a hotend, not a complete toolhead or extruder kit.\u003c\/li\u003e\n  \u003cli\u003eConfirm your printed mount, fan duct, wiring length, and firmware sensor type before installing.\u003c\/li\u003e\n  \u003cli\u003eRun PID tuning after installation, then re-check retraction and pressure advance.\u003c\/li\u003e\n  \u003cli\u003eFor abrasive filaments, use a hardened or wear-resistant nozzle rather than the basic plated-copper nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Black \/ Rapido Hotend 2 280° HF","offer_id":44243213746398,"sku":"4536149660","price":99.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Rapido Hotend 2 280° UHF","offer_id":44243221119198,"sku":"8162336967","price":109.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Rapido Plus Hotend 2 350° HF","offer_id":44243221151966,"sku":"7939321660","price":109.99,"currency_code":"USD","in_stock":false},{"title":"Black \/ Rapido Plus Hotend 2 350° UHF","offer_id":44243221184734,"sku":"2743054383","price":119.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/Screenshot2023-06-24at8.34.51AM.png?v=1696710903"},{"product_id":"phaetus-rapido-plus-hotend-2_280-uhf-magenta_limited","title":"Phaetus Rapido Hotend 2_280° UHF Magenta_Limited","description":"\u003cp\u003e\u003cstrong\u003eLimited magenta Rapido Hotend 2 UHF for fast 1.75 mm printing.\u003c\/strong\u003e This is the 280°C \/ 104NT Rapido 2 UHF configuration: an aluminum heatsink, titanium heatbreak, plated-copper extended melt zone, planar ceramic heater, and UHF hardware for higher-flow printing.\u003c\/p\u003e\n\u003ch3\u003eWhy this over a standard HF hotend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF melt path:\u003c\/strong\u003e the extended heatblock gives more melt length for high-speed extrusion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServiceable sensor:\u003c\/strong\u003e removable \u003cstrong\u003e104NT\u003c\/strong\u003e temperature sensor, matching the 280°C Rapido 2 configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat control:\u003c\/strong\u003e titanium heatbreak and aluminum heatsink help keep heat where it belongs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited finish:\u003c\/strong\u003e magenta heatsink body instead of the usual blue or black Rapido 2 colorway.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Phaetus Rapido Hotend 2 UHF, magenta limited edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature sensor:\u003c\/strong\u003e 104NT removable sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e 280°C configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend format:\u003c\/strong\u003e UHF \/ Ultra High Flow with extended melt zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle ecosystem:\u003c\/strong\u003e V6-style M6 nozzles; pair with \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-copper-plated-v6-style-1-75mm-nozzle\"\u003ePhaetus copper-plated V6 nozzles\u003c\/a\u003e, \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus hardened steel V6 nozzles\u003c\/a\u003e, or \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-v2-hardened-steel-v6-style-1-75mm-nozzle\"\u003ePhaetus DLC hardened steel V6 nozzles\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse this for high-speed FDM printers that need a compact, high-flow hotend for PLA, PETG, ABS\/ASA, and other 1.75 mm materials within the 280°C sensor configuration.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the \u003cstrong\u003e280°C \/ 104NT\u003c\/strong\u003e Rapido 2 version, not the 350°C PT1000 “Plus” configuration.\u003c\/li\u003e\n\u003cli\u003eFor abrasive filaments, use hardened or DLC hardened nozzles rather than brass.\u003c\/li\u003e\n\u003cli\u003eConfirm your firmware thermistor setting before heating the hotend.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44316736848094,"sku":"7020489349","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/copy.jpg?v=1696709229"},{"product_id":"rapido-plus-hotend-2_350-uhf-magenta_limited","title":"Rapido Plus Hotend 2_350° UHF Magenta_Limited","description":"\u003cp\u003e\u003cstrong\u003ePhaetus Rapido Plus Hotend 2 UHF in limited magenta\u003c\/strong\u003e — a 24V, 350°C, PT1000-equipped all-metal hotend for high-speed and high-temperature 1.75mm printing.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the Plus 2 UHF\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e350°C rating with PT1000 sensing\u003c\/strong\u003e for engineering materials that need more headroom than standard hotends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapido 2 titanium heatbreak\u003c\/strong\u003e and planar ceramic heater design improve heat control and reduce the clog\/deformation risk versus the earlier Rapido layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF configuration\u003c\/strong\u003e adds the extended melt-zone hardware buyers want for high-flow builds and Volcano-style nozzle setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-handed nozzle-change design\u003c\/strong\u003e uses the rigid Rapido 2 block and titanium screw structure to make maintenance less annoying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Phaetus Rapido Plus Hotend 2 UHF, limited magenta heatsink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum temperature:\u003c\/strong\u003e 350°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature sensor:\u003c\/strong\u003e removable PT1000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater:\u003c\/strong\u003e planar ceramic heater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle ecosystem:\u003c\/strong\u003e V6-compatible by default; UHF setup is intended for extended\/Volcano-style high-flow use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Phaetus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and use\u003c\/h3\u003e\n\u003cp\u003eUse this when you are building a high-flow toolhead for Voron-style, VzBot, RatRig, Annex, or other open-frame CoreXY printers that can actually use the extra melt capacity. Pair it with a \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2-high-temp-silicone-sock-uhf\"\u003eRapido 2 UHF silicone sock\u003c\/a\u003e, spare \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-copper-plated-v6-style-1-75mm-nozzle\"\u003ePhaetus V6 copper-plated nozzles\u003c\/a\u003e, or a replacement \u003ca href=\"https:\/\/dfh.fm\/products\/pt1000-temperature-sensor\"\u003ePT1000 temperature sensor\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the \u003cstrong\u003ePlus\u003c\/strong\u003e version with a PT1000 sensor and 350°C rating. Set the correct sensor type in firmware before heating it.\u003c\/li\u003e\n\u003cli\u003eRapido Plus Hotend and Rapido Plus Hotend 2 parts are not fully interchangeable even when the outside dimensions look similar.\u003c\/li\u003e\n\u003cli\u003eIt is magenta, not pink. That matters enough that a verified buyer said it out loud.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“It's NOT pink. It's magenta.”\u003c\/blockquote\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44316736913630,"sku":"3670750007","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/Rapido2magenta2copy_e04c462c-0d35-4887-8686-7b2e09835117.jpg?v=1692439706"},{"product_id":"phaetus-rapido-2-high-temp-silicone-sock-hf","title":"Phaetus Rapido 2 High Temp Silicone Sock HF","description":"\u003cp\u003e\u003cstrong\u003eReplacement high-temp silicone sock for the Phaetus Rapido 2 HF hotend.\u003c\/strong\u003e This black silicone cover wraps the Rapido 2 HF heater block\/nozzle area to reduce plastic buildup and help keep the hotend thermally stable under part-cooling airflow.\u003c\/p\u003e\n\u003ch3\u003eWhy use the fitted Rapido 2 HF sock?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner hotend:\u003c\/strong\u003e the non-stick silicone surface helps keep molten filament from baking onto the heater block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore stable heat:\u003c\/strong\u003e the sock insulates the hot zone so fan wash has less effect on nozzle temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrect Rapido 2 HF fit:\u003c\/strong\u003e this is the HF-size sock; Rapido 2 HF and UHF socks are different.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phaetus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e Rapido 2 HF silicone protective sock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer\/reference code:\u003c\/strong\u003e 19560122\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage:\u003c\/strong\u003e 1 silicone sock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Phaetus Rapido Hotend 2 \/ Rapido 2 Plus HF-style heater block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003eUse this with the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2\"\u003ePhaetus Rapido 2\u003c\/a\u003e HF setup. If you are running the longer UHF melt zone, use the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2-high-temp-silicone-sock-uhf\"\u003eRapido 2 UHF silicone sock\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a complete hotend, heater, thermistor, nozzle, or heat block.\u003c\/li\u003e\n\u003cli\u003eNot interchangeable with Rapido 1 socks or the Rapido 2 UHF sock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“It is genuine and works.”\u003c\/blockquote\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44316744646878,"sku":"2687899139","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_5054.png?v=1696710205"},{"product_id":"phaetus-rapido-2-high-temp-silicone-sock-uhf","title":"Phaetus Rapido 2 High Temp Silicone Sock UHF","description":"\u003cp\u003e\u003cstrong\u003eReplacement high-temperature silicone sock for the Phaetus Rapido 2 UHF hotend.\u003c\/strong\u003e This black Phaetus sock wraps the UHF heater block to help hold temperature steady and keep melted filament from baking onto the block during printing.\u003c\/p\u003e\n\u003ch3\u003eWhy use a fresh sock\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInsulates the Rapido 2 UHF heat block so the hotend recovers faster under part cooling.\u003c\/li\u003e\n\u003cli\u003eHelps keep PLA, PETG, ABS, ASA, and other residue off the heater block and nozzle area.\u003c\/li\u003e\n\u003cli\u003eRestores a worn, torn, or plastic-coated sock without replacing the whole hotend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade for the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2\"\u003ePhaetus Rapido 2\u003c\/a\u003e UHF-style hotend package.\u003c\/li\u003e\n\u003cli\u003eUse this UHF version when your Rapido 2 heater block\/packaging is marked \u003cstrong\u003eUHF\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNeed the shorter HF sock instead? Use the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2-high-temp-silicone-sock-hf\"\u003ePhaetus Rapido 2 High Temp Silicone Sock HF\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1x\u003c\/strong\u003e Phaetus Rapido 2 UHF black silicone sock.\u003c\/li\u003e\n\u003cli\u003eFactory bagged replacement part; hotend, heater, thermistor, and nozzle are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRapido 1 HF\/UHF hotends; use the \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-high-temperature-sock\"\u003ePhaetus Rapido High Temperature Sock\u003c\/a\u003e for original Rapido hotends.\u003c\/li\u003e\n\u003cli\u003eDragon, Dragonfly, or other Phaetus hotend families with different heater block shapes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44316744712414,"sku":"7570953498","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_5053.png?v=1696709952"},{"product_id":"phaetus-pla-aero-filament","title":"Phaetus aeWorthy™ PLA-AERO 1kg Spool","description":"\u003ch4\u003eLightweight active-foaming PLA — half the weight, matte finish\u003c\/h4\u003e\n\u003cp\u003ePhaetus aeWorthy PLA-AERO is a foaming PLA: as the nozzle gets hotter, the filament expands and the printed part gets lighter and less dense. You tune the foaming by temperature, so you can dial parts from denser\/stronger at the low end to very light at the high end — up to roughly 200% expansion and about half the weight of standard PLA at the same volume. The surface comes out matte, which hides layer lines and takes paint and primer well. Built for RC wings and planes, drones, ship and aircraft models, large display pieces, and cosplay where weight, not load-bearing strength, is the goal.\u003c\/p\u003e\n\n\u003ch5\u003ePrint settings (Phaetus)\u003c\/h5\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm  |  \u003cstrong\u003eSpool:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 200-240C — this is your foaming control. Lower = denser and stronger, higher = lighter and more foamed. Run a temperature tower to find your weight\/strength sweet spot.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 40-60C on glass, PC, or PEI film\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 30-90 mm\/s\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart-cooling fan:\u003c\/strong\u003e ON\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eTwo things that make or break foaming PLA\u003c\/h5\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDry it first.\u003c\/strong\u003e Foaming PLA is humidity-sensitive — damp filament foams unevenly and leaves a rough, blistered surface. Dry around 55C for 6-8 hours before printing, and again after the spool has been sitting. A filament dryer or dry box is strongly recommended for consistent results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduce your flow \/ tune extrusion multiplier.\u003c\/strong\u003e Because the material expands in the nozzle, most slicers over-extrude with foaming PLA out of the box. Drop flow (commonly to ~50-60% at the high-temp\/high-foam end) and re-tune per temperature. This is normal for the foaming-PLA class, not a defect.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eHardware\u003c\/h5\u003e\n\u003cp\u003eThis is unfilled PLA — no glass or carbon fiber — so a standard brass nozzle is fine; no hardened or DLC nozzle required. If you want maximum foaming throughput on large wings, a larger-diameter nozzle (0.6-0.8 mm) gives the material more room to expand.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e1 kg spool, 1.75 mm. Available in White, Grey, Red, and Yellow.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"White","offer_id":44319478055134,"sku":"5775516320","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":44319478087902,"sku":"3355488022","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":44319478120670,"sku":"6882183912","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":44319478153438,"sku":"4633072575","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeWorthy_PLA-Aero_1_png.webp?v=1692638345"},{"product_id":"phaetus-aeworthy™-asa-aero-1kg","title":"Phaetus aeWorthy™ ASA-AERO 1kg","description":"\u003ch2\u003ePhaetus aeWorthy ASA-AERO — Lightweight Foaming ASA, 1.75mm, 1kg\u003c\/h2\u003e\n\u003cp\u003eASA-AERO is a foaming ASA: a chemical blowing agent sits dormant in the filament and activates in the hotend, so you tune print weight straight from the nozzle temperature. Run it hotter and the material foams more and prints lighter — Phaetus rates up to a 250% foaming ratio, which can bring a finished part down to roughly 40-50% of the weight of the same part in standard ASA. It keeps ASA's UV-aging and heat resistance, so parts hold up outdoors.\u003c\/p\u003e\n\u003cp\u003eIt's built for weight-critical work: RC aircraft and foamies, ship models, drone parts, and anywhere you want stiffness-per-gram without going to foam board. The foamed surface comes out matte, which softens the look of layer lines.\u003c\/p\u003e\n\u003ch3\u003eWhat it prints like\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet weight with temperature.\u003c\/strong\u003e Nozzle 240-280C — lower end = denser\/stronger, higher end = lighter\/more foam. Dial it in on a test part before committing a build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn retraction OFF.\u003c\/strong\u003e The filament keeps expanding inside the nozzle, so stringing during travels is inherent and retraction tuning won't clear it. Phaetus recommends disabling retraction and cleaning up travels in slicer instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse an enclosure.\u003c\/strong\u003e Like all ASA, it wants a warm ambient (roughly 40-70C) to release internal stress and stop warping. Bed 80-110C on glass, PEI, or PVP glue stick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle size.\u003c\/strong\u003e \u0026gt;=0.4mm works; go \u0026gt;=0.6mm for thin single-wall models so foamed walls keep their strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate.\u003c\/strong\u003e ASA outgasses — run it in a ventilated room.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNo hardened nozzle needed.\u003c\/strong\u003e ASA-AERO is foamed chemically, not filled with glass or carbon fiber, so it is \u003cem\u003enot\u003c\/em\u003e abrasive — a standard brass or plated-copper nozzle is fine. (Don't confuse it with the fiber-filled aeWorthy line — ASA-GF and ABS-GF \u003cem\u003eare\u003c\/em\u003e abrasive and do need a hardened\/wear-resistant nozzle.)\u003c\/p\u003e\n\u003ch3\u003eKeep it dry\u003c\/h3\u003e\n\u003cp\u003eASA is hygroscopic and a foaming filament is especially fussy about moisture — wet filament foams inconsistently and can bubble or string worse. Dry before use (around 80C for ~8 hours is typical for ASA-Aero; Phaetus's TDS doesn't publish an exact schedule) and print from a dry box if you can. A filament dryer is the right pairing here.\u003c\/p\u003e\n\u003cp\u003eSpec: 1.75mm, 1kg net, Natural. Base filament density 1.03 g\/cm3. Nozzle 240-280C, bed 80-110C, enclosure recommended, retraction off, brass nozzle OK.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Natural","offer_id":44319763693790,"sku":"2163974101","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeWorthy_ASA-Aero_1_png.webp?v=1692654281"},{"product_id":"phaetus-aeworthy™-toughpetg-hs-1kg-spool","title":"Phaetus aeWorthy™ ToughPETG-HF 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeWorthy ToughPETG-HF\u003c\/strong\u003e is a toughness-modified, high-flow PETG built for fast, reliable printing. It keeps PETG's good chemical and heat resistance while adding meaningful impact strength over standard PETG, and it's tuned to stay dimensionally accurate at high print speeds. Good choice for functional parts, brackets, enclosures, and end-use components where you want durability without jumping to a fiber-reinforced engineering filament.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHeads up: this is listed under \"ToughPETG-HS\" but Phaetus's actual product name is ToughPETG-HF. Same spool — the \"HF\" stands for the high-flow\/high-speed formula.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003ePrint settings\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpool weight:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temp:\u003c\/strong\u003e 230-260 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temp:\u003c\/strong\u003e 70-80 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 30-250 mm\/s (Phaetus rates the formula up to ~400 mm\/s on capable hardware)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e low (0-50%), like most PETG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNozzle\u003c\/h4\u003e\n\u003cp\u003eThis is straight PETG — \u003cstrong\u003enot abrasive\u003c\/strong\u003e. A stock brass nozzle is perfectly fine; no hardened or DLC nozzle needed. (If you're also running glass- or carbon-filled filament, that's where a hardened nozzle matters — this one doesn't need it.)\u003c\/p\u003e\n\u003ch4\u003eDrying \u0026amp; storage\u003c\/h4\u003e\n\u003cp\u003ePETG absorbs moisture from the air. If the spool has been open or sat in humidity, dry it before printing (roughly 65 °C for 4-6 hours in a filament dryer) to avoid stringing and surface bubbling. Store sealed with desiccant between sessions.\u003c\/p\u003e\n\u003cp\u003e1.75 mm, 1 kg net. Sold by color.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"White","offer_id":44319768281310,"sku":"6487130639","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":44319771853022,"sku":"6186823084","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":44319771885790,"sku":"4011639760","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":44319771918558,"sku":"6183101894","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":44319771951326,"sku":"4480853583","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":44319771984094,"sku":"2460612398","price":11.49,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":44319772016862,"sku":"9886292081","price":11.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeWorthy_ToughPETG-HF_5_png.webp?v=1692654521"},{"product_id":"phaetus-aeworthy™-petg-cf-1kg-spool","title":"Phaetus aeWorthy™ PETG-CF 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeWorthy PETG-CF\u003c\/strong\u003e is PETG reinforced with chopped carbon fiber on a 1.75mm, 1kg spool (Black). It's the stiffness-and-finish upgrade over plain PETG: more rigid, more dimensionally stable, lower warp, with a matte black surface that hides layer lines. Good for functional parts that don't need the heat resistance of a nylon — jigs and fixtures, brackets, enclosures, drone\/RC frames, and cosmetic functional prints.\u003c\/p\u003e\n\u003ch3\u003ePrint settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 235-260°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 70-80°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 30-60 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e not required (PETG-class), but helps with consistency on larger parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware: you need a hardened nozzle\u003c\/h3\u003e\n\u003cp\u003eCarbon fiber is abrasive. It will wear out a standard brass nozzle quickly. Run a \u003cstrong\u003ehardened steel, DLC-coated, tungsten carbide, or ruby nozzle\u003c\/strong\u003e — Phaetus recommends these for their Dragon, Dragonfly, and Rapido hotends. If you don't already have one, add a hardened or DLC nozzle to your order before printing this.\u003c\/p\u003e\n\u003ch3\u003eDrying\u003c\/h3\u003e\n\u003cp\u003ePETG-CF is hygroscopic and carbon-fiber blends pull in moisture fast. \u003cstrong\u003eDry before use\u003c\/strong\u003e if the spool has been open or sitting — wet filament gives you stringing, popping, and a rough surface. A filament dryer or a low oven (follow your dryer's PETG profile) restores it. Store sealed with desiccant.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e1.75mm diameter, 1kg net weight. Exact carbon-fiber percentage and density are not published on Phaetus's data sheet; comparable PETG-CF filaments run roughly 10-15% chopped CF. This is an engineering filament — moisture-sensitive, so buy what you'll use.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319781322974,"sku":"9374787181","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeWorthy_PETG-CF_1_png.webp?v=1692655398"},{"product_id":"phaetus-aeflex™-tpu-85a-hf-filament-1kg-spool","title":"Phaetus aeFlex™ TPU-85A-HF Filament 1kg Spool","description":"\u003ch2\u003ePhaetus aeFlex TPU-85A-HF — soft 85A flexible, built for speed\u003c\/h2\u003e\n\u003cp\u003eA Shore \u003cstrong\u003e85A\u003c\/strong\u003e flexible TPU in Phaetus's \u003cstrong\u003ehigh-flow (HF)\u003c\/strong\u003e grade. It's noticeably softer and more rubbery than the 90A\/95A TPUs most people start with, but the HF formulation is tuned to keep flowing at speed — Phaetus rates it for \u003cstrong\u003eover 100 mm\/s\u003c\/strong\u003e when paired with a capable direct-drive extruder. Good for gaskets, seals, grommets, vibration dampers, protective cases, RC tires, and any squishy functional part.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSoft, grippy, high-elongation parts that need to bend and bounce back.\u003c\/li\u003e\n\u003cli\u003eFaster than typical soft TPU thanks to the high-flow grade — you don't have to crawl at 15 mm\/s.\u003c\/li\u003e\n\u003cli\u003eLayer bonding and surface finish are good in the 85A-HF class when dry and run at moderate retraction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-drive extruder strongly recommended.\u003c\/strong\u003e 85A is soft enough that it buckles and jams in most Bowden setups. A short, well-constrained filament path matters more than raw temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo hardened nozzle needed.\u003c\/strong\u003e This is unfilled TPU — no glass or carbon fiber — so a standard brass nozzle is fine. (Only our glass\/carbon-filled engineering lines need a hardened or DLC nozzle.)\u003c\/li\u003e\n\u003cli\u003eHeated bed helpful but gentle; smooth PEI or a glue stick gives clean release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTemperatures (start here, then dial in)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e ~200-225C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e ~20-50C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e ~1.16 g\/cm3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese are typical values for the 85A high-flow TPU class. Confirm against Phaetus's published TDS for this exact spool and tune in 5C steps.\u003c\/p\u003e\n\n\u003ch3\u003eDrying — do not skip this\u003c\/h3\u003e\n\u003cp\u003eTPU is hygroscopic and re-absorbs moisture fast. Wet filament prints stringy, rough, and weak. Dry before use: \u003cstrong\u003e~50-65C for 4-6h\u003c\/strong\u003e (or 70C for ~7h) in a filament dryer or oven, then print straight from a dry box or reseal with desiccant. If a spool has been open on the shelf, dry it first — every time.\u003c\/p\u003e\n\n\u003cp\u003eStock-clearance pricing. New, factory-sealed 1kg spool, Black, 1.75mm.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319785451742,"sku":"8006158198653","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeFlex_TPU-85A-HF_1_png.webp?v=1692655658"},{"product_id":"phaetus-aeforce™-pet-cf-filament-1kg-spool","title":"Phaetus aeForce™ PET-CF Filament 1kg Spool","description":"\u003ch2\u003ePhaetus aeForce PET-CF — 15% Carbon Fiber Reinforced PET, 1.75mm, 1kg\u003c\/h2\u003e\n\u003cp\u003eA carbon-fiber-reinforced PET engineering filament for functional, load-bearing parts. The PET base brings low moisture sensitivity (relative to nylon), high strength, creep resistance, good chemical resistance and high heat resistance; the 15% chopped carbon fiber adds stiffness and a matte finish while suppressing PET's tendency to warp. Phaetus's \"Smart Fiber Reinforced Technology\" forms a fiber mesh inside the material so prints stay dimensionally stable with minimal shrinkage. Prints fine on an open-frame machine — \u003cstrong\u003eno heated chamber required\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiff functional parts: brackets, mounts, jigs, fixtures, drone and RC frames, tooling.\u003c\/li\u003e\n\u003cli\u003eParts that see heat or humidity — PET-CF handles both better than PLA-CF and is less moisture-fussy than nylon-CF.\u003c\/li\u003e\n\u003cli\u003eMatte black finish that hides layer lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrint settings (from Phaetus's TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle \/ print temp:\u003c\/strong\u003e 280-320°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed \/ build plate:\u003c\/strong\u003e 60-80°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 30-90 mm\/s (45 mm\/s in the datasheet test)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling fan:\u003c\/strong\u003e low\/off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.30 g\/cm³ · \u003cstrong\u003eMelting temp:\u003c\/strong\u003e 251°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHardened nozzle required (abrasive)\u003c\/h3\u003e\n\u003cp\u003eCarbon fiber is abrasive — it will chew through a standard brass nozzle quickly. Run a \u003cstrong\u003ehardened steel, DLC-coated, tungsten carbide, or ruby nozzle\u003c\/strong\u003e. If you don't already have one, add a hardened nozzle to your order. A 0.4mm hardened nozzle is the baseline; 0.6mm+ feeds CF more reliably and is more wear-tolerant.\u003c\/p\u003e\n\n\u003ch3\u003eKeep it dry\u003c\/h3\u003e\n\u003cp\u003ePET's moisture absorption is low but it prints poorly when wet — expect stringing, popping\/bubbles in the extrusion, and a rough surface. \u003cstrong\u003eDry before printing: oven at 100-120°C for 4-6 hours\u003c\/strong\u003e, then print straight from a dry box held below 15% RH. A filament dryer or sealed dry box is strongly recommended for any CF-filled engineering material.\u003c\/p\u003e\n\n\u003ch3\u003eOptional: annealing\u003c\/h3\u003e\n\u003cp\u003eHeat deflection is ~87°C as printed. Anneal finished parts at 80-100°C for 4-8 hours (Phaetus tests at 100°C\/8h) to raise heat resistance toward ~175°C and increase strength. Let parts cool to room temperature naturally.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eSingle 1kg spool, 1.75mm, black. Sold as-is from inventory — verify your printer hotend can reach 300°C+ and has a hardened nozzle before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319787778270,"sku":"2994179635","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeForce_PET-CF_1_png.webp?v=1692656345"},{"product_id":"phaetus-aeforce™-paht-gf-filament-1kg-spool","title":"Phaetus aeForce™ PAHT-GF Filament 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeForce PAHT-GF\u003c\/strong\u003e is a high-temperature nylon (polyamide) reinforced with \u003cstrong\u003e15% chopped glass fiber\u003c\/strong\u003e. It's an engineering filament for functional parts that need stiffness, heat resistance, and dimensional stability — brackets, mounts, jigs, tooling, and machine or automotive components. Compared to plain nylon it warps and shrinks less, and the glass fill adds rigidity and wear resistance while keeping the toughness nylon is known for.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiff, heat-resistant functional parts (PAHT base handles far more heat than PLA\/PETG)\u003c\/li\u003e\n\u003cli\u003eLow warp and low shrinkage for a nylon, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eWear- and chemical-resistant components\u003c\/li\u003e\n\u003cli\u003ePairs with Phaetus aeSupport S-PAHT quick-remove support if you need clean overhangs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrint settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle \/ print temp:\u003c\/strong\u003e 300-320 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temp:\u003c\/strong\u003e 70-90 °C (use an adhesion aid)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e strongly recommended — this is a high-temp engineering nylon; an enclosed, draft-free chamber gives you the layer adhesion and warp control these materials need\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend:\u003c\/strong\u003e must reach and hold 320 °C reliably (Phaetus recommends their Dragon \/ Dragonfly series, but any all-metal high-temp hotend that hits 320 °C works)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHardware you need — read this\u003c\/h3\u003e\n\u003cp\u003eGlass fiber is \u003cstrong\u003eabrasive\u003c\/strong\u003e. A brass nozzle will wear out quickly and start under-extruding. \u003cstrong\u003eRun a hardened-steel, DLC-coated, or ruby nozzle.\u003c\/strong\u003e If you don't have one, add it to your cart — printing GF nylon through brass is a false economy. (We carry hardened and DLC nozzles; see related products.)\u003c\/p\u003e\n\n\u003ch3\u003eDrying — not optional\u003c\/h3\u003e\n\u003cp\u003eGlass-filled high-temp nylon is \u003cstrong\u003ehygroscopic\u003c\/strong\u003e — it pulls moisture from the air fast, and wet filament prints with popping, stringing, weak layers, and a rough surface. \u003cstrong\u003eDry it before printing\u003c\/strong\u003e and keep it in a dry box while you print. As a general nylon guideline, dry in a filament dryer or low oven until it runs clean; this spool may have absorbed moisture sitting on a shelf, so dry it first regardless of how it looks.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eClearance stock — sold as-is. Engineering nylon is moisture-sensitive; we recommend drying before first use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319798296798,"sku":"3165120304","price":59.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":44319798657246,"sku":"8215280664","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":44319800262878,"sku":"2203872751","price":59.99,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":44319800656094,"sku":"3142176675","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeForce_PAHT-GF_1_png.webp?v=1692656747"},{"product_id":"phaetus-aecoating™-nexpa-gf25-filament-1kg-spool","title":"Phaetus aeCoating™ NexPA-GF25 Filament","description":"\u003ch2\u003ePhaetus aeCoating NexPA-GF25 — 25% Glass-Fiber High-Temp Nylon\u003c\/h2\u003e\n\u003cp\u003eA high-temperature, glass-fiber-reinforced nylon for stiff, heat-stable functional parts. Phaetus builds it with a co-extrusion \u003cstrong\u003eskin-core\u003c\/strong\u003e structure: a pure-nylon outer skin wrapped around a core packed with 25% chopped glass fiber. The point of that design is two-fold — the skin gives you clean, pure-resin Z-layer bonding (so you don't lose interlayer strength the way plain GF nylon does), and it keeps most of the abrasive fiber off the nozzle wall.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it prints well\u003c\/h3\u003e\n\u003cp\u003eFunctional engineering parts that need to stay stiff and dimensionally stable when warm: brackets, mounts, jigs and fixtures, tooling, motion and drivetrain components, and thin-walled parts that still need real mechanical strength. As-printed tensile strength is ~97 MPa (X-Y), and heat-deflection temperature reaches ~195°C after annealing — well beyond what PETG or ABS will hold.\u003c\/p\u003e\n\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened or DLC nozzle — required.\u003c\/strong\u003e Glass fiber is abrasive. The skin-core layout reduces nozzle wear versus standard GF nylon, but a brass nozzle will still erode. Run hardened steel or DLC. (We sell hardened\/DLC nozzles — pair one with this spool.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temp hotend.\u003c\/strong\u003e Print at 300-340°C; you need an all-metal hotend rated to those temps, ideally with a heater block of 12mm or more for stable flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure recommended.\u003c\/strong\u003e Cooling fan OFF, bed 70-80°C on PEI (or a swipe of PVP glue stick). An enclosure helps with warp and consistency on a high-temp nylon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrint settings (from Phaetus's TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle: 300-340°C\u003c\/li\u003e\n\u003cli\u003eBed: 70-80°C, PEI or PVP glue\u003c\/li\u003e\n\u003cli\u003ePart cooling fan: OFF\u003c\/li\u003e\n\u003cli\u003ePrint speed: 30-120 mm\/s\u003c\/li\u003e\n\u003cli\u003eNozzle size: 0.4-1.0mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm  |  Density: 1.29 g\/cm³\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDrying — read this first\u003c\/h3\u003e\n\u003cp\u003eNylon is thirsty. Wet filament oozes, bubbles, and prints rough. Keep the spool in a dry box (humidity under 15%) \u003cem\u003ewhile you print\u003c\/em\u003e, and reseal it in the foil bag when you're done. If it has picked up moisture, dry at \u003cstrong\u003e80-100°C for 4-6 hours\u003c\/strong\u003e before printing. Optional: anneal finished parts at 80-100°C for 4-8h to push strength and heat resistance higher.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eEngineering filament, sold as liquidation stock — factory-sealed. Because it's hygroscopic, dry before use if the seal has been opened.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"500g \/ Black","offer_id":44319806226654,"sku":"7277428245","price":38.99,"currency_code":"USD","in_stock":false},{"title":"500g \/ Red","offer_id":44319806259422,"sku":"6032509287","price":38.99,"currency_code":"USD","in_stock":false},{"title":"500g \/ Blue","offer_id":44319806292190,"sku":"4329799983","price":38.99,"currency_code":"USD","in_stock":false},{"title":"500g \/ Orange","offer_id":44319806324958,"sku":"3447223590","price":38.99,"currency_code":"USD","in_stock":false},{"title":"1kg \/ Black","offer_id":44319803343070,"sku":"5640179320","price":69.99,"currency_code":"USD","in_stock":false},{"title":"1kg \/ Red","offer_id":44319803375838,"sku":"1814110038","price":69.99,"currency_code":"USD","in_stock":true},{"title":"1kg \/ Blue","offer_id":44319803408606,"sku":"9406816931","price":69.99,"currency_code":"USD","in_stock":true},{"title":"1kg \/ Orange","offer_id":44319803441374,"sku":"6147346054","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeCoating_NexPA-GF25_1_png.webp?v=1692657150"},{"product_id":"phaetus-aecoating™-nexpa-cf25-filament","title":"Phaetus aeCoating™ NexPA-CF25 Filament","description":"\u003ch2\u003ePhaetus aeCoating NexPA-CF25 — Co-Extrusion 25% Carbon Fiber PAHT Nylon\u003c\/h2\u003e\n\u003cp\u003eA high-temperature carbon-fiber nylon built for stiff, heat-resistant, dimensionally stable functional parts — engineering brackets, jigs and fixtures, RC\/drone frames, automotive and tooling components. The base is a high-temp PAHT (PPA-class) nylon reinforced with 25% chopped carbon fiber.\u003c\/p\u003e\n\u003ch3\u003eWhat makes it different: co-extrusion skin-core\u003c\/h3\u003e\n\u003cp\u003eUnlike conventional single-extrusion CF nylon, NexPA-CF25 is built with a skin-core structure: the abrasive carbon fiber sits in the core under a pure-resin outer skin. Two practical results — better Z-axis interlayer adhesion (the bond comes from fiber-free resin at the layer boundary), and reduced nozzle wear because less fiber contacts the nozzle wall on the way out. It is still an abrasive filament, but it is engineered to be gentler on hardware than typical CF nylon.\u003c\/p\u003e\n\u003ch3\u003eHardware you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened nozzle is mandatory.\u003c\/strong\u003e Carbon fiber is abrasive — a brass nozzle will be destroyed. Use a hardened-steel nozzle at minimum; tungsten carbide is ideal for long runs. Phaetus specs a heater block of at least 12mm to hold temp at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-metal hotend rated to 340°C.\u003c\/strong\u003e Print temp is 300-340°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo enclosure required.\u003c\/strong\u003e This grade prints open-frame; a heated chamber is not needed (good ventilation is still recommended — CF nylon can release fumes).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint settings (from Phaetus TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle \/ print temp: \u003cstrong\u003e300-340°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed: \u003cstrong\u003e70-80°C\u003c\/strong\u003e, PEI surface or a coat of PVP (glue stick)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter: 0.4-1.0mm\u003c\/li\u003e\n\u003cli\u003ePrint speed: 30-90 mm\/s\u003c\/li\u003e\n\u003cli\u003eRecommended support: S-PAHT quick-remove support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrying — read this first\u003c\/h3\u003e\n\u003cp\u003eNylon absorbs moisture fast. Load it into a dry box (below 15% RH) the moment you open the vacuum bag. If it has picked up moisture you'll see oozing, popping\/bubbles, and rough surfaces — dry at \u003cstrong\u003e80-100°C for 4-6 hours\u003c\/strong\u003e to recover. For maximum strength, parts can be annealed at 80-100°C for 4-8 hours and cooled naturally.\u003c\/p\u003e\n\u003ch3\u003eMechanical properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTensile strength (X-Y): 103 MPa  |  Young's modulus: ~8790 MPa\u003c\/li\u003e\n\u003cli\u003eBending strength: 170 MPa  |  Bending modulus: ~8570 MPa\u003c\/li\u003e\n\u003cli\u003eHeat deflection temp: 122.5°C @ 1.8 MPa (187.5°C @ 0.45 MPa)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.23 g\/cm³  |  Diameter: 1.75mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eEngineering filament — sold from clearance stock. Store sealed and dry; dry before printing for best results.\u003c\/em\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"500g \/ Black","offer_id":44319815434462,"sku":"4853508549","price":54.99,"currency_code":"USD","in_stock":false},{"title":"1kg \/ Black","offer_id":44319815565534,"sku":"7208950611","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeCoating_NexPA-CF25_1-1_png.webp?v=1692658103"},{"product_id":"phaetus-aeflex™-tpu-78d-1kg-spool","title":"Phaetus aeFlex™ TPU-78D 1kg Spool","description":"\u003cp\u003e\u003cstrong\u003ePhaetus aeFlex TPU-78D\u003c\/strong\u003e is a high-hardness, semi-rigid TPU filament. At Shore \u003cstrong\u003e78D\u003c\/strong\u003e it sits at the stiff end of the flexible spectrum - nothing like a soft 95A. The higher surface hardness and modulus mean it pushes through the extruder without buckling, so you get the success rate of a near-rigid material plus TPU's impact and abrasion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it prints well:\u003c\/strong\u003e durable functional parts that need toughness without floppiness - snap-fit enclosures, bumpers and protective housings, semi-flexible brackets and jigs, gaskets and seals that must hold their shape, and reinforced living hinges.\u003c\/p\u003e\n\u003ch3\u003ePrint settings (Phaetus TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle \/ print temp:\u003c\/strong\u003e 210-230 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temp:\u003c\/strong\u003e 50-70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild surface:\u003c\/strong\u003e glass, PEI film, or PC film\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 30-120 mm\/s. Direct-drive extruders handle ≥100 mm\/s comfortably; Bowden setups should stay 30-60 mm\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling fan:\u003c\/strong\u003e on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e standard brass or plated-copper. This is an \u003cem\u003eunfilled\u003c\/em\u003e TPU - no glass or carbon fiber - so it is \u003cstrong\u003enot abrasive\u003c\/strong\u003e and does \u003cstrong\u003enot\u003c\/strong\u003e require a hardened or DLC nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrying - read this\u003c\/h3\u003e\n\u003cp\u003eTPU is hygroscopic. Wet filament oozes, prints with bubbles, and finishes rough. Keep the spool in a dry box below 15% RH once the vacuum bag is opened, and reseal in the original foil bag when not printing. If it has picked up moisture, \u003cstrong\u003edry at 70-80 °C for 4-6 hours\u003c\/strong\u003e to restore print quality.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e TPU, Shore 78D (semi-rigid), unfilled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.28 g\/cm³ (ISO 1183)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile strength at break:\u003c\/strong\u003e 33.81 MPa · \u003cstrong\u003eElongation at break:\u003c\/strong\u003e ~237% · \u003cstrong\u003eFlexural modulus:\u003c\/strong\u003e ~1026 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e not required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phaetus","offers":[{"title":"Black","offer_id":44319822086366,"sku":"5265848906","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/aeFlex_TPU-78D_1_png.webp?v=1692658581"},{"product_id":"phaetus-rapido-2-leaf-spring-heater","title":"Phaetus Rapido 2 Leaf Spring - Heater","description":"\u003cp\u003e\u003cstrong\u003eOEM Phaetus heater leaf spring clip for Rapido 2.\u003c\/strong\u003e This is the small metal retainer spring used around the Rapido 2 heater block assembly; the package is marked \u003cstrong\u003e10.2 × 8.9 × 9 mm\u003c\/strong\u003e and 1 piece.\u003c\/p\u003e\n\u003ch3\u003eWhy this part matters\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores the heater-side spring clip\/retainer instead of replacing the whole hotend.\u003c\/li\u003e\n  \u003cli\u003eUseful after a blob cleanup, teardown, or lost spring during hotend service.\u003c\/li\u003e\n  \u003cli\u003eOEM Phaetus spare part for Rapido 2-family heater hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Phaetus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e Leaf Spring - Heater\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage size marking:\u003c\/strong\u003e 10.2 × 8.9 × 9 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e heater leaf spring \/ clip for Rapido v2 hotend hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Phaetus Rapido 2 hotends that use the M4 thermistor mount, including the non-plus Rapido 2 104NT model and the older Rapido 2 Plus PT1000 model.\u003c\/li\u003e\n  \u003cli\u003ePairs with the live \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-rapido-2\"\u003ePhaetus Rapido 2\u003c\/a\u003e listing and other Rapido 2 service parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot a heater cartridge\u003c\/h3\u003e\n\u003cp\u003eThis is the spring\/clip only. It is not a ceramic heater, thermistor, heat block, silicone sock, or complete hotend. If you are rebuilding the heater side, check the fit before ordering against your exact Rapido 2 version.\u003c\/p\u003e\n\u003cblockquote\u003e“It's a spring. It does what it does.”\u003c\/blockquote\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44519488487646,"sku":"2806874031","price":0.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_5643.png?v=1700040142"},{"product_id":"phaetus-cocoon-dryer-box","title":"Phaetus CoCoon Dryer Box","description":"\u003ctable style=\"width: 100%; height: 372.281px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 22.4862%; height: 19.5938px;\"\u003eParameter\u003c\/th\u003e\n\u003cth style=\"width: 74.6819%; height: 19.5938px;\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 39.1875px;\"\u003eProduct Dimensions\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 39.1875px;\"\u003e300mm (L) * 120mm (W) * 277mm (H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 39.1875px;\"\u003eLargest Spool Size\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 39.1875px;\"\u003eDiameter: Ø204mm, Width: 70mm, Suitable for 1KG filament spools, Compatible Filament Diameters: 1.75mm\/2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 39.1875px;\"\u003eNet Weight of the Product\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 39.1875px;\"\u003e1.43kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 39.1875px;\"\u003eOperating Environment\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 39.1875px;\"\u003e1) Recommended Operating Temperature: 10°C–35°C 2) Recommended Operating Humidity: ≤ 90% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 39.1875px;\"\u003eBattery Compatibility\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 39.1875px;\"\u003eAAA (Size 7) * 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 19.5938px;\"\u003ePower\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 19.5938px;\"\u003e≤ 1W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 39.1875px;\"\u003eWeight Sensor\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 39.1875px;\"\u003e1) Weighing Range: 0-300g 2) Weighing Accuracy: ±3g 3) Empty Spool Weight Setting Range: 0-990g (in 10g increments)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 39.1875px;\"\u003eTemperature Sensor\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 39.1875px;\"\u003e1) Temperature Range: -10°C to 45°C 2) Temperature Accuracy: ±1°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 19.5938px;\"\u003eHumidity Sensor\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 19.5938px;\"\u003e1) Humidity Range: 0-100% RH 2) Humidity Accuracy: ±3% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 22.4862%; height: 39.1875px;\"\u003eDisplay Screen Size \u0026amp; Type\u003c\/td\u003e\n\u003ctd style=\"width: 74.6819%; height: 39.1875px;\"\u003e54mm*34mm; LCD display screen (Segment code formula)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplicable Filaments\u003c\/td\u003e\n\u003ctd\u003eSuitable for 1kg filaments from mainstream manufacturers on the market\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLargest Compatible Filaments Spool\u003c\/td\u003e\n\u003ctd\u003eDiameter: Ø204mm, Width: 70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":44775859126494,"sku":"7219237714","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/PHAETUS-COCOON-DRYER-BOX-01.jpg?v=1707647931"}],"url":"https:\/\/formosissima.myshopify.com\/collections\/phaetus.oembed","provider":"dfh.fm","version":"1.0","type":"link"}