{"title":"Tools","description":"","products":[{"product_id":"heatset-insert-tool-guide-by-ldo","title":"Heatset Insert Tool Guide by LDO","description":"\u003cp\u003e\u003cstrong\u003eLDO’s brass M3 heatset insert tool makes insert installation cleaner and easier.\u003c\/strong\u003e It replaces a compatible soldering-iron tip so you can press M3 heat-set inserts into printed parts with better alignment and heat transfer than a bare iron tip.\u003c\/p\u003e\n\u003ch3\u003eWhy use the LDO insert tool\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePurpose-built for M3 inserts:\u003c\/strong\u003e LDO documents this tool for M3 brass inserts used in printed parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable depth setup:\u003c\/strong\u003e the threaded tongue can be set to roughly match insert height, helping keep heat on the insert instead of the printed part.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCommon soldering-iron fit:\u003c\/strong\u003e LDO specifies compatibility with typical sleeved irons using \u003cstrong\u003e900M-T-style tips\u003c\/strong\u003e, including many Hakko FX888D-style Chinese soldering irons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: \u003cstrong\u003eLDO Motors\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eUse: installing \u003cstrong\u003eM3 brass heat-set inserts\u003c\/strong\u003e in 3D-printed plastic parts\u003c\/li\u003e\n  \u003cli\u003eTool style: brass heatset insert soldering-iron tip \/ insert guide\u003c\/li\u003e\n  \u003cli\u003eSoldering-iron compatibility: \u003cstrong\u003e900M-T-style sleeved tips\u003c\/strong\u003e per LDO documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs well with\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/black-nickel-coated-threaded-heat-set-inserts\"\u003eBlack Nickel Coated Threaded Heat Set Inserts\u003c\/a\u003e for M3 insert stock.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/digital-smart-electric-soldering-iron\"\u003eDigital Smart Electric Soldering Iron\u003c\/a\u003e if you need a temperature-controlled iron.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/stealth-press-zero\"\u003eStealth Press Zero\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/iconic-fab-stealth-press-complete-kit\"\u003eIconic Fab Stealth Press Complete Kit\u003c\/a\u003e for a more controlled heat-set workflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is for \u003cstrong\u003eM3 inserts\u003c\/strong\u003e; it is not a universal insert-size kit.\u003c\/li\u003e\n  \u003cli\u003eIt is not a soldering iron and does not replace temperature control or careful setup.\u003c\/li\u003e\n  \u003cli\u003eCheck your iron before ordering: LDO calls out 900M-T-style sleeved tip compatibility, not TS100-style cartridge tips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReference: \u003ca href=\"https:\/\/docs.ldomotors.com\/guides\/heatset_insert_tool_guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLDO Heatset Insert Tool Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cblockquote\u003e“This little tool… fit as well nor work as well as this does.”\u003c\/blockquote\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":43395880976606,"sku":"8347520897","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/heatsettoolcomponents.jpg?v=1663132683"},{"product_id":"polyformer-kit-by-reiten966","title":"Polyformer Kit by Reiten966","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFind more information on \u003ca href=\"https:\/\/github.com\/Reiten966\/Polyformer\" title=\"polyformer github\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e, \u003ca href=\"https:\/\/github.com\/sponsors\/Reiten966\/sponsorships?sponsor=Reiten966\u0026amp;tier_id=199363\u0026amp;preview=false\" title=\"polyformer discord signup\" target=\"_blank\"\u003eDiscord\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.reiten.design\/polyformer\" title=\"Polyformer\" target=\"_blank\"\u003eproject site\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003ePolyformer is a 3D printed, open-source machine that recycles PET bottles (90% of plastic water bottles are made from PET) into filaments for 3D printers. Polyformer is designed to be built with mostly 3D printed parts and easily obtainable components commonly found on 3D printers. Most makers can build it themselves. The modular architecture allows users to easily swap out parts and modify the machine to their liking. The unique vertical L shape allows the users to easily interact with the machine and also minimizes the amount of space that the machine takes.\u003c\/p\u003e\n\u003cp\u003eBy using a slicing tool built with stacked bearings to cut the water bottle into a long and consistent ribbon, the user can then feed the ribbon into the repurposed 3D printer hotend which thermoforms the ribbon into a 1.75mm filament as it goes through the brass nozzle with corresponding hole size. The user can then mount one end of the filament on the red motorized spool to automize the process. The spool can be easily taken off to be transferred and used on a 3D printer. The outer shell can be easily opened thanks to the geared mechanism, it can be closed the same way to keep the user away from touching the hotend. The entire machine was printed using recycled PET bottles which gives a nice translucent look to it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinted parts not included.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eBOM Qty\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFEP Wire 18awg (red, green, white)\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e0.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFEP Wire 18awg black\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFemale Spade Connectors\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForked Spade Connectors\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e623 Bearings 3x10x4mm\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e608 Bearing 8mm x 22mm x 7mm\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.6mm drill bit\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless steel 12mmx300mm Tubing or Rod \u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePTFE Lubricant (spray for US orders, semi-solid for rest of word)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2mm allen key - 80mm length\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBig tree tech EBB42 (or EBB36)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6020 24v Fan\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.3\" or 0.96\" display with connectors\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003edfh.fm x ldo Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC14 Panel Mount Plug\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMean Well LRS-100-24\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolcano Heater Block\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e24v 40W Heater Cartridge\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Screw Thermistor 104NT\u003c\/td\u003e\n\u003ctd\u003e1\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolcano Nozzle - 1.75mm x 1.20mm\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6mmx3mm Neodymium magnets\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHCS M3x6mm\u003c\/td\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003ctd\u003e47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHCS M3x8mm\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHCS M3x12mm\u003c\/td\u003e\n\u003ctd\u003e58\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHCS M3x20mm\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless Steel BHCS M3x30mm\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3 Nuts\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlloy steel M3 Washer\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM3x5x4mm Heatset Insert\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003ctd\u003e130 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"dfh.fm","offers":[{"title":"Copper Heat Block \/ Copper Nozzle (Recommended)","offer_id":44185836683486,"sku":"6217680386","price":89.99,"currency_code":"USD","in_stock":false},{"title":"Copper Heat Block \/ Brass Nozzle (BOM Version)","offer_id":44185836650718,"sku":"6217680387","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Aluminum Heat Block \/ Brass Nozzle (Classic Version)","offer_id":44185836617950,"sku":"6217680388","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/Componence_Shot.jpg?v=1663931167"},{"product_id":"ball-head-hex-keys","title":"Ball Head Hex Keys","description":"\u003cp\u003eBall-end hex (Allen) keys for assembling and maintaining 3D printers. The ball tip lets you engage a socket-head cap screw at an angle - up to around 25 degrees off-axis - so you can reach fasteners buried behind the gantry, in extrusion channels, or under the toolhead where a straight key simply won't line up.\u003c\/p\u003e\u003cp\u003eThe plain end of each key gives full torque for final tightening. A core tool for Voron and other CoreXY builds, where bolts are often tucked into awkward corners. Metric sizes.\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"M2","offer_id":43499577737438,"sku":"1556220158","price":0.69,"currency_code":"USD","in_stock":true},{"title":"M2.5","offer_id":43499577770206,"sku":"4716623368","price":0.79,"currency_code":"USD","in_stock":true},{"title":"M3","offer_id":43499577802974,"sku":"7389534856","price":0.79,"currency_code":"USD","in_stock":true},{"title":"M4","offer_id":43499577835742,"sku":"1719587452","price":0.89,"currency_code":"USD","in_stock":true},{"title":"M5","offer_id":43499577868510,"sku":"7485316865","price":0.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/lllll.jpg?v=1665186175"},{"product_id":"keychain-bottle-opener-nozzle-spinner-thing","title":"Keychain Bottle Opener Nozzle Spinner Thing","description":"\u003cp\u003e\u003cstrong\u003eA pocketable Salad Fork shop tool with real utility.\u003c\/strong\u003e Black steel keychain-style bottle opener with three hex cutouts for spinning 3D-printer nozzles during hotend service.\u003c\/p\u003e\n\u003ch3\u003eWhy keep one on the bench\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCombines a bottle opener, nozzle-spinner cutouts, and Salad Fork fork-logo swag in one flat steel piece.\u003c\/li\u003e\n\u003cli\u003eSmall enough for a key ring, tool drawer, or printer-side maintenance kit.\u003c\/li\u003e\n\u003cli\u003eGood match for V6-style nozzle work where you want a quick spinner, not a full wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\/finish:\u003c\/strong\u003e black steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Salad Fork variant with fork-logo cutout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctions:\u003c\/strong\u003e bottle opener, keychain carry, and three hex nozzle-spinner cutouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore SKU:\u003c\/strong\u003e 1496363577.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits the bench\u003c\/h3\u003e\n\u003cp\u003eUse it as printer-shop swag that still earns its spot next to hotend consumables like \u003ca href=\"https:\/\/dfh.fm\/products\/phaetus-brass-v6-style-1-75mm-nozzle\"\u003ePhaetus V6-style nozzles\u003c\/a\u003e. For matching maker swag, see the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-loco-keychains\"\u003eTitanium Voron, Micron \u0026amp; Salad Fork keychains\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a calibrated torque wrench; use proper hotend service procedure for final tightening.\u003c\/li\u003e\n\u003cli\u003eDo not use it to break loose a seized nozzle cold. Heat the hotend and support the heater block correctly.\u003c\/li\u003e\n\u003cli\u003eThis is a flat metal utility keychain\/tool, not a printer component.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Salad Fork \/ Black Steel","offer_id":44125615259870,"sku":"1496363577","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_4374.jpg?v=1680547669"},{"product_id":"iconic-fab-stealth-press-complete-kit","title":"Iconic Fab Stealth Press Complete Kit","description":"\u003ch4\u003eAbout Stealth Press\u003c\/h4\u003e\n\u003cp\u003eStealth Press is a highly precise, mostly printed DIY heat set insert tool for generic, TS100\/101, and Pinecil soldering irons.\u003c\/p\u003e\n\u003cp\u003eThere are multiple projects like this available for free download and build. Most of them rely on Misumi standard 2020 or 4020 extrusions to provide precision which adds extra cost, time, and complexity to the build.\u003c\/p\u003e\n\u003cp\u003eStealth Press build relies on precision provided by 300mm MGN12H linear rail instead which provides a stable spine to build every other component around it.\u003c\/p\u003e\n\u003cp\u003eIntegrated, printable build plate adds another critical element for precision and easiness with which to work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIN STOCK.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncluded in the Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eM3x8 SHCS * 40\u003c\/li\u003e\n\u003cli\u003eM5x25 SCHS * 2\u003c\/li\u003e\n\u003cli\u003eF695-2RS Bearings * 4\u003c\/li\u003e\n\u003cli\u003eM3 Threaded Inserts * 30\u003c\/li\u003e\n\u003cli\u003eMGN12H Linear Rail (Z0 preload, per Iconic Fab) *1\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/dfh.fm\/products\/not-a-key-bak%C2%AE\" title=\"Definitely Not a Key-Bak\" rel=\"noopener\" target=\"_blank\"\u003eRetractable Device\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/dfh.fm\/products\/digital-smart-electric-soldering-iron\" title=\"Digital Smart Soldering Iron\" rel=\"noopener\" target=\"_blank\"\u003eDigital Smart Electric Soldering Iron\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/dfh.fm\/products\/heat-press-soldering-iron-tips-for-generic-soldering-iron\" title=\"Heat Press Tips\" rel=\"noopener\" target=\"_blank\"\u003eSoldering Iron Heat Insert Tips (M2-M8)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info: \u003ca title=\"link to printables iconic fab stealth press kit\" href=\"https:\/\/www.printables.com\/model\/609644-stealth-press-heat-set-insert-press\" data-mce-href=\"https:\/\/www.printables.com\/model\/609644-stealth-press-heat-set-insert-press\" target=\"_blank\"\u003ePrintables\u003c\/a\u003e.\u003c\/h5\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44520074805470,"sku":"6769444829","price":45.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/sp_kit.jpg?v=1708775480"},{"product_id":"key-bak®-super48-keychain-36-13-oz-super-duty","title":"Key-Bak® SUPER48 Keychain 36\"\/13 OZ Super Duty","description":"\u003ch4\u003ePRODUCT DESCRIPTION\u003c\/h4\u003e\n\u003cp\u003eThe SUPER48 Heavy Duty Retractable Keychain was built for rugged use and hard work. The durable black polycarbonate case is impact resistant, and the retractable cord made with DuPont™ Kevlar® fiber is guaranteed to outlast any other retractable key holders on the market. Attach your keys or small tools to the oversized split ring and secure the clip to your belt. When you need your keys just pull them out, when your done let them go and the built-in tether retracts back into place, secure the ball-joint lock until you need them again. When you need a heavy duty key holder to secure a large number of keys, the SUPER48 Heavy Duty Retractable Keychain your best choice.\u003c\/p\u003e\n\u003ch4\u003eFeatures and Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA with globally sourced materials.\u003c\/li\u003e\n\u003cli\u003eKEY-BAK ECO-REELS produce 90% less waste than disposable reels, keychains, and tethers\u003c\/li\u003e\n\u003cli\u003eHeavy Duty aramid fiber cord with an 80 lb. minimum breaking strength\u003c\/li\u003e\n\u003cli\u003e2-1\/4\" diameter black, lightweight, shatter resistant polycarbonate case\u003c\/li\u003e\n\u003cli\u003ePatented ball-joint lock prevents snagging and allows for overloading\u003c\/li\u003e\n\u003cli\u003eBelt clip options fits belts up to 1.8\" and locks with the included pin\u003c\/li\u003e\n\u003cli\u003eOversized 1.5\" black split-ring\u003c\/li\u003e\n\u003cli\u003eHeavy Duty retraction force holds up to 8 oz. and has a 48\" reach\u003c\/li\u003e\n\u003cli\u003eStandard Duty retraction force holds up to 13 oz. and has a 36\" reach\u003c\/li\u003e\n\u003cli\u003eXtreme Duty retraction force holds up to 20 oz. and has a 28\" reach\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Key-Bak®","offers":[{"title":"Default Title","offer_id":44539170783454,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/super48-clip-splitring-black-keybak-extended-2000px_1800x1800_prev_ui.png?v=1700599928"},{"product_id":"loctite-290-threadlocker-medium-strength-high-temp-6-ml-tube","title":"Loctite 290 Threadlocker: Medium-Strength, High-Temp - 6 ml Tube","description":"\u003cp\u003eA threadlocker with a thin, low-viscosity formulation, adept at penetrating narrow gaps and fissures, thus perfectly suitable for securing preassembled fasteners.\u003c\/p\u003e\n\u003cp\u003eThis product, LOCTITE® 290, presents as a green adhesive with medium to high strength, specifically developed for locking and sealing threaded fasteners. Its low viscosity allows it to seep into engaged threads through capillary action, obviating the necessity for dismantling before application. This characteristic also renders it effective for sealing pores in welded joints, castings, and components made from powdered metal. The product is an anaerobic adhesive that hardens when confined in air-free environments between tightly fitting metal surfaces, thereby safeguarding against loosening and leakage caused by shocks and vibrations.\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003ePrevents fastener loosening on vibrating assemblies, e.g., pumps, gear boxes, or presses.\u003c\/li\u003e\n    \u003cli\u003eIdeal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors, and set screws.\u003c\/li\u003e\n    \u003cli\u003eSeals porosities in welds, castings, and powdered metal parts.\u003c\/li\u003e\n    \u003cli\u003eRequires heat for disassembly.\u003c\/li\u003e\n    \u003cli\u003eMeets Mil-S-46163A Type III Grade R.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication method\u003c\/td\u003e\n\u003ctd\u003ePost Applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e-55.0 - 150.0 °C (-65.0 - 300.0 °F )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eFor Pre-Assembled Fasteners, Porosity Sealing, Threadlocking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque, M10 Steel Nuts\/Bolts\u003c\/td\u003e\n\u003ctd\u003e10.0 N·m (90.0 in.\/lb. )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure type\u003c\/td\u003e\n\u003ctd\u003eAnaerobic Cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e20.0 min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey characteristics\u003c\/td\u003e\n\u003ctd\u003eDisassembly: Disassembly with Heat, Fluorescent, Strength: Medium to High Strength, Viscosity: Low Viscosity, Wicking\/Penetrating Grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical form\u003c\/td\u003e\n\u003ctd\u003eLiquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevail torque, M10 Steel Nuts\/Bolts\u003c\/td\u003e\n\u003ctd\u003e29.0 N·m (260.0 in.\/lb. )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended for use with\u003c\/td\u003e\n\u003ctd\u003eMetal: Brass, Metal: Steel, Metal: Steel - Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity, Speed 20 RPM\u003c\/td\u003e\n\u003ctd\u003e40.0 mPa·s (cP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Henkel North America","offers":[{"title":"Default Title","offer_id":44640578961630,"sku":"7239823310","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/51Pr2OauEcL._AC_SL1200.png?v=1704446381"},{"product_id":"loctite-242-threadlocker-medium-strength-high-temp-6-ml-tube","title":"Loctite 242 Threadlocker: Medium-Strength, High-Temp - 6 ml Tube","description":"\u003cp\u003eA medium strength, medium viscosity thixotropic threadlocking adhesive for metal thread sizes up to M36.\u003c\/p\u003e\n\u003cp\u003eLOCTITE® 242 is a medium strength, medium viscosity, anaerobic-curing threadlocking adhesive offering general purpose qualities. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMedium strength\u003c\/li\u003e\n\u003cli\u003eMedium viscosity\u003c\/li\u003e\n\u003cli\u003eQuick fixture time\u003c\/li\u003e\n\u003cli\u003eThixotropic to reduce adhesive migration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ccaption\u003eTechnical Information\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical basis \/ base\u003c\/td\u003e\n\u003ctd\u003eMethacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e5.0 - 20.0 min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey characteristics\u003c\/td\u003e\n\u003ctd\u003eThixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended for use with\u003c\/td\u003e\n\u003ctd\u003eMetal: Brass, Metal: Steel, Metal: Steel - Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity, Brookfield - RVF, @ 25.0 °C Spindle 3, speed 20 rpm, Helipath\u003c\/td\u003e\n\u003ctd\u003e800.0 - 1600.0 mPa·s (cP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Henkel North America","offers":[{"title":"Default Title","offer_id":44640578994398,"sku":"1265736893","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/Image_d792d8e6-5420-4712-9853-af725c859bdc.png?v=1704445979"},{"product_id":"loctite-242-threadlocker-medium-strength-glue-6-ml-tube","title":"Loctite 242 Threadlocker: Medium-Strength Glue - 6 ml Tube","description":"\u003cp\u003eA threadlocker with a thin, low-viscosity formulation, adept at penetrating narrow gaps and fissures, thus perfectly suitable for securing preassembled fasteners.\u003c\/p\u003e\n\u003cp\u003eThis product, LOCTITE® 290, presents as a green adhesive with medium to high strength, specifically developed for locking and sealing threaded fasteners. Its low viscosity allows it to seep into engaged threads through capillary action, obviating the necessity for dismantling before application. This characteristic also renders it effective for sealing pores in welded joints, castings, and components made from powdered metal. The product is an anaerobic adhesive that hardens when confined in air-free environments between tightly fitting metal surfaces, thereby safeguarding against loosening and leakage caused by shocks and vibrations.\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003ePrevents fastener loosening on vibrating assemblies, e.g., pumps, gear boxes, or presses.\u003c\/li\u003e\n    \u003cli\u003eIdeal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors, and set screws.\u003c\/li\u003e\n    \u003cli\u003eSeals porosities in welds, castings, and powdered metal parts.\u003c\/li\u003e\n    \u003cli\u003eRequires heat for disassembly.\u003c\/li\u003e\n    \u003cli\u003eMeets Mil-S-46163A Type III Grade R.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication method\u003c\/td\u003e\n\u003ctd\u003ePost Applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e-55.0 - 150.0 °C (-65.0 - 300.0 °F )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eFor Pre-Assembled Fasteners, Porosity Sealing, Threadlocking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreakaway torque, M10 Steel Nuts\/Bolts\u003c\/td\u003e\n\u003ctd\u003e10.0 N·m (90.0 in.\/lb. )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure type\u003c\/td\u003e\n\u003ctd\u003eAnaerobic Cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd\u003e20.0 min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey characteristics\u003c\/td\u003e\n\u003ctd\u003eDisassembly: Disassembly with Heat, Fluorescent, Strength: Medium to High Strength, Viscosity: Low Viscosity, Wicking\/Penetrating Grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical form\u003c\/td\u003e\n\u003ctd\u003eLiquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevail torque, M10 Steel Nuts\/Bolts\u003c\/td\u003e\n\u003ctd\u003e29.0 N·m (260.0 in.\/lb. )\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended for use with\u003c\/td\u003e\n\u003ctd\u003eMetal: Brass, Metal: Steel, Metal: Steel - Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity, Speed 20 RPM\u003c\/td\u003e\n\u003ctd\u003e40.0 mPa·s (cP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Henkel North America","offers":[{"title":"Default Title","offer_id":44640582467806,"sku":"5085892852","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/710dYyD5mTL._SL1500.png?v=1704445817"},{"product_id":"heat-press-soldering-iron-tips-for-generic-soldering-iron","title":"Heat Press Soldering Iron Tips for Generic Soldering Iron","description":"\u003cp\u003e\u003cstrong\u003eGeneric heat-set insert tips for 3D printed parts.\u003c\/strong\u003e This brass tip set fits generic 900M\/T18-style soldering irons and covers M2\/M2.5, M3, M4, M5, M6 (1\/4 in), and M8 threaded heat-set inserts.\u003c\/p\u003e\n\u003ch3\u003eWhy use insert tips instead of a bare soldering tip?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat, size-matched faces help press inserts straight instead of rocking them into the plastic.\u003c\/li\u003e\n\u003cli\u003eKnurled brass tips transfer heat into the insert while keeping the shoulder controlled at the part surface.\u003c\/li\u003e\n\u003cli\u003eOne kit covers the common threaded insert sizes used across 3D-printer printed parts, jigs, fixtures, and electronics enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded sizes:\u003c\/strong\u003e M2\/M2.5, M3, M4, M5, M6 \/ 1\/4 in, and M8.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip style:\u003c\/strong\u003e generic soldering-iron heat-set insert adapter\/tip set; sold as tips only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e brass tips with knurled grip surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse case:\u003c\/strong\u003e installing brass threaded inserts into printed plastic parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUseful with heat-set insert presses such as \u003ca href=\"https:\/\/dfh.fm\/products\/stealth-press-zero\"\u003eStealth Press Zero\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePair with a compatible generic soldering iron such as the \u003ca href=\"https:\/\/dfh.fm\/products\/digital-smart-electric-soldering-iron\"\u003eDigital Smart Electric Soldering Iron\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eIf you are using a TS100\/TS101\/Pinecil-style iron, use the \u003ca href=\"https:\/\/dfh.fm\/products\/ts100-compatible-tips-for-threaded-inserts\"\u003eTS100-compatible tips for threaded inserts\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a soldering iron, insert press, or threaded insert assortment.\u003c\/li\u003e\n\u003cli\u003eNot the TS100\/TS101\/Pinecil tip version.\u003c\/li\u003e\n\u003cli\u003eConfirm your iron accepts this generic tip style before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44658169938142,"sku":"9479049151","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_5338_59c90420-5dd3-4623-aaa6-b15f57ffec49.png?v=1704868419"},{"product_id":"grid-box-17-4cm-9-8cm-2-2cm","title":"Grid Box 17.4cm * 9.8cm * 2.2cm","description":"\u003cp\u003e\u003cstrong\u003eCompact 15-compartment organizer for terminals, screws, nozzles, and other small bench parts.\u003c\/strong\u003e This clear plastic grid box measures \u003cstrong\u003e17.4 cm × 9.8 cm × 2.2 cm\u003c\/strong\u003e and uses removable divider walls so you can combine cells when a part needs more room.\u003c\/p\u003e\n\u003ch3\u003eWhy this box works on a printer bench\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e15 small compartments\u003c\/strong\u003e sized around \u003cstrong\u003e3.3 cm × 3.0 cm\u003c\/strong\u003e for connector housings, crimps, fasteners, beads, washers, nozzles, and labels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear lid and body\u003c\/strong\u003e make it easy to see what is inside without opening every tray.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable internal dividers\u003c\/strong\u003e let you make wider horizontal compartments for longer parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow 2.2 cm profile\u003c\/strong\u003e stacks cleanly in a drawer or project bin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood fit for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSorting terminals and housings from the \u003ca href=\"https:\/\/dfh.fm\/products\/jst-xh-2-54-230pc-kit\"\u003eJST-XH 2.54 230pc Kit\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eKeeping spare screws, heat-set inserts, ferrules, crimps, nozzles, and small electronics parts separated during a Voron, ERCF, or general 3D-printer build.\u003c\/li\u003e\n  \u003cli\u003eTraveling with a small repair kit without dumping tiny parts into one bag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOutside size: \u003cstrong\u003e17.4 cm L × 9.8 cm W × 2.2 cm H\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eLayout: \u003cstrong\u003e15 compartments\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eApproximate cell size shown by supplier image: \u003cstrong\u003e3.3 cm × 3.0 cm\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaterial\/finish: translucent clear plastic with blue latch\u003c\/li\u003e\n  \u003cli\u003eConfiguration: removable divider walls; fixed outer shell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a small-parts organizer, not a sealed waterproof case.\u003c\/li\u003e\n  \u003cli\u003eBest for loose bench hardware and components; very tall connectors or bulky tools need the \u003ca href=\"https:\/\/dfh.fm\/products\/grid-box-27-5cm-17-5cm-4-2cm\"\u003elarger 27.5 cm grid box\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Exactly what I needed… I like the removable walls that let you make the compartments bigger.”\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44800100171998,"sku":"4802779778","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/2251697022458_.pic.jpg?v=1708507759"},{"product_id":"grid-box-27-5cm-17-5cm-4-2cm","title":"Grid Box 27.5cm * 17.5cm * 4.2cm","description":"\u003cp\u003e\u003cstrong\u003eLarge 36-compartment organizer for fasteners, terminals, nozzles, and other bench parts.\u003c\/strong\u003e This clear plastic grid box measures \u003cstrong\u003e27.5 cm × 17.5 cm × 4.2 cm\u003c\/strong\u003e and uses removable divider walls so you can keep tiny parts separated or open up wider cells when a part needs more room.\u003c\/p\u003e\n\u003ch3\u003eWhy this box works on a printer bench\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e36 compartments\u003c\/strong\u003e give you enough separation for screw sizes, heat-set inserts, crimps, ferrules, jumpers, nozzles, beads, and labels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear lid and body\u003c\/strong\u003e make it easy to see what is inside without opening every tray.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable internal dividers\u003c\/strong\u003e let you combine adjacent cells for longer connectors or mixed repair-kit parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow 4.2 cm profile\u003c\/strong\u003e stacks cleanly in a drawer, project bin, or on a workbench shelf.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood fit for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSorting terminals and housings from the \u003ca href=\"https:\/\/dfh.fm\/products\/jst-xh-2-54-230pc-kit\"\u003eJST-XH 2.54 230pc Kit\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eKeeping spare screws, heat-set inserts, ferrules, crimps, nozzles, and small electronics parts separated during a Voron, ERCF, or general 3D-printer build.\u003c\/li\u003e\n  \u003cli\u003eBuilding a larger bench organizer when the \u003ca href=\"https:\/\/dfh.fm\/products\/grid-box-17-4cm-9-8cm-2-2cm\"\u003e15-compartment grid box\u003c\/a\u003e is too small.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOutside size: \u003cstrong\u003e27.5 cm L × 17.5 cm W × 4.2 cm H\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eLayout: \u003cstrong\u003e36 removable compartments\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaterial\/finish: translucent clear plastic with snap latches\u003c\/li\u003e\n  \u003cli\u003eConfiguration: removable divider walls; fixed outer shell\u003c\/li\u003e\n  \u003cli\u003eWeight on store record: \u003cstrong\u003e200 g\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a small-parts organizer, not a sealed waterproof case.\u003c\/li\u003e\n  \u003cli\u003eIt ships empty; the photo shows the organizer only, not a kit of parts.\u003c\/li\u003e\n  \u003cli\u003eFor a pocket-size connector or travel box, use the \u003ca href=\"https:\/\/dfh.fm\/products\/grid-box-17-4cm-9-8cm-2-2cm\"\u003esmaller 17.4 cm grid box\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44800102301918,"sku":"7800093470","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/2241697022457_.pic.jpg?v=1708507894"},{"product_id":"ts100-compatible-tips-for-threaded-inserts","title":"TS100 Compatible Tips for Threaded Inserts","description":"\u003cp\u003e\u003cstrong\u003eTS100-style heat-set insert tips for clean, repeatable threaded-insert installation.\u003c\/strong\u003e This set gives you brass insert tips and a TS100-style heating cartridge\/adapter for common M2-M8 threaded inserts used in 3D-printed parts.\u003c\/p\u003e\n\u003ch3\u003eWhy use insert tips instead of a normal soldering point?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat, size-matched faces\u003c\/strong\u003e help push inserts squarely instead of rocking them in at an angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrass tips\u003c\/strong\u003e spread heat into the insert body for more controlled plastic flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTS100 \/ TS101 \/ Pinecil fit\u003c\/strong\u003e makes it a compact setup for printers, printed jigs, and bench repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: installing heat-set \/ threaded inserts in plastic printed parts\u003c\/li\u003e\n\u003cli\u003eInsert range: common \u003cstrong\u003eM2-M8\u003c\/strong\u003e threaded-insert sizes\u003c\/li\u003e\n\u003cli\u003eIron compatibility: \u003cstrong\u003eTS100, TS101, Pinecil\u003c\/strong\u003e, and compatible TS-style irons\u003c\/li\u003e\n\u003cli\u003eTip material: brass insert tips with knurled bodies for handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse with a heat-set insert press such as the \u003ca href=\"https:\/\/dfh.fm\/products\/stealth-press-zero\"\u003eStealth Press Zero\u003c\/a\u003e for straighter, repeatable insert depth.\u003c\/li\u003e\n\u003cli\u003ePair with \u003ca href=\"https:\/\/dfh.fm\/products\/black-nickel-coated-threaded-heat-set-inserts\"\u003eblack nickel coated threaded heat-set inserts\u003c\/a\u003e for Voron and other printed builds.\u003c\/li\u003e\n\u003cli\u003eIf your iron uses 900M \/ T18-style tips instead of TS100-style cartridge tips, use the \u003ca href=\"https:\/\/dfh.fm\/products\/heat-press-soldering-iron-tips-for-generic-soldering-iron\"\u003egeneric soldering iron heat-set insert tips\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a complete soldering iron.\u003c\/li\u003e\n\u003cli\u003eNot a standard electronics soldering tip set.\u003c\/li\u003e\n\u003cli\u003eNot for cold-pressing inserts; heat and controlled pressure are still required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“fit and work nice” — verified buyer review\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":44808869675230,"sku":"4100338276","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/80369B9D-CDBA-4F51-A1EE-7B99134CC6FE_1_201_a.jpg?v=1708662131"}],"url":"https:\/\/formosissima.myshopify.com\/collections\/tools.oembed","provider":"dfh.fm","version":"1.0","type":"link"}