{"title":"Voron Stealthburner","description":"","products":[{"product_id":"voron-stealthburner-fastener-and-led-kit","title":"Voron Stealthburner Fastener and LED Kit","description":"\u003cp\u003e\u003cstrong\u003eSmall Stealthburner hardware-and-lighting pack for finishing the Voron toolhead.\u003c\/strong\u003e This kit bundles the long M3 fasteners, LED buttons, heat-set inserts, magnet, and fine FEP wire used around the Voron Stealthburner face and lighting area.\u003c\/p\u003e\n\u003ch3\u003eWhy this kit exists\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePulls the easy-to-miss Stealthburner lighting and face hardware into one bag instead of forcing a separate fastener and LED hunt.\u003c\/li\u003e\n\u003cli\u003eIncludes \u003cstrong\u003e3 RGBW LED buttons\u003c\/strong\u003e for Stealthburner illumination plus \u003cstrong\u003e30 AWG FEP wire\u003c\/strong\u003e for the low-current LED run.\u003c\/li\u003e\n\u003cli\u003ePairs with printed Stealthburner light parts such as the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-clear-led-cover\"\u003eclear LED cover\u003c\/a\u003e and \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-led-diffuser-mask\"\u003eLED diffuser mask\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3× M3x50 SHCS\u003c\/strong\u003e, fully threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2× M3x25 SHCS\u003c\/strong\u003e, fully threaded\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2× M3x6 FHCS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2× M3 threaded inserts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1× 6 mm × 3 mm round magnet\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3× RGBW LED buttons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e915 mm\u003c\/strong\u003e of \u003cstrong\u003e30 AWG FEP wire\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor Voron Stealthburner toolhead builds and refreshes. Voron’s official Stealthburner sourcing guide lists the underlying part families used here, including M3 socket-head and flat-head fasteners, NeoPixel RGBW mini button PCBs, a 6×3 mm magnet, and 30 AWG PTFE\/FEP-style wiring.\u003c\/p\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is not a full Stealthburner kit, Clockwork 2 extruder kit, hotend kit, fan kit, or printed-parts set.\u003c\/li\u003e\n\u003cli\u003eFor the Rainbow Barf logo PCB bundle, use the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit-rainbow-barf-edition\"\u003eRainbow Barf Edition\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":42380311560414,"sku":"4763763661","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0704.png?v=1642908965"},{"product_id":"rainbow-barf-led-pcb-by-whoppingpochard-and-vinnycordeiro","title":"Rainbow Barf LED PCB by Lightweight Labware and vinnycordeiro","description":"\u003cp\u003e\u003cstrong\u003eAddressable Voron logo lighting for StealthBurner.\u003c\/strong\u003e The Rainbow Barf Logo LED is a compact PCB from Lightweight Labware \/ whoppingpochard and vinnycordeiro with \u003cstrong\u003eeight WS2812B-2020 protocol-compatible RGB LEDs\u003c\/strong\u003e arranged to line up with the Voron StealthBurner logo cutout.\u003c\/p\u003e\n\u003ch3\u003eWhy use Rainbow Barf instead of a single logo LED?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight independently addressable LEDs\u003c\/strong\u003e let each section of the logo animate separately instead of glowing as one block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStealthBurner-specific layout\u003c\/strong\u003e matches the Voron logo window and fits the special printed carrier\/diffuser from the project files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKlipper-friendly\u003c\/strong\u003e: the official project points to Klipper LED Effect examples for logo animations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProject: \u003ca href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/LEDs\/Rainbow_Barf_Logo_LED\"\u003eRainbow Barf Logo LED for StealthBurner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLEDs: \u003cstrong\u003e8× WS2812B-2020\u003c\/strong\u003e addressable RGB LEDs, LCSC C965555\u003c\/li\u003e\n\u003cli\u003ePassive parts from the official BOM: \u003cstrong\u003e100 nF 0402 capacitor\u003c\/strong\u003e and \u003cstrong\u003e470 Ω 0402 resistor\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for the Voron \u003cstrong\u003eStealthBurner\u003c\/strong\u003e logo diffuser\/carrier assembly\u003c\/li\u003e\n\u003cli\u003eApproximate board class: about the size of a single 5050 WS2812 NeoPixel PCB, per the project documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and installation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse with a Voron StealthBurner toolhead and the project’s printed carrier and diffuser.\u003c\/li\u003e\n\u003cli\u003eFor a bundled install path, see the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit-rainbow-barf-edition\"\u003eVoron StealthBurner Fastener and LED Kit: Rainbow Barf Edition\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor fine toolhead wiring, pair it with \u003ca href=\"https:\/\/dfh.fm\/products\/30awg-stranded-fep-wire-x-10m\"\u003e30AWG stranded FEP wire\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis listing is for the Rainbow Barf LED PCB only; printed carrier\/diffuser parts and wiring are not included unless explicitly shown in your order.\u003c\/li\u003e\n\u003cli\u003eIt is not a drop-in replacement for every StealthBurner LED setup without soldering and Klipper configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Many LED, such wow!”\u003c\/blockquote\u003e","brand":"Lightweight Labware","offers":[{"title":"Default Title","offer_id":42495893733598,"sku":"7956583636","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0931_a2f797b5-f7d8-42e4-8dba-7d97b9a07209.png?v=1645672301"},{"product_id":"voron-stealthburner-clear-led-cover","title":"Voron Stealthburner Clear LED Cover","description":"\u003cp\u003e\u003cstrong\u003eClear PETG Stealthburner LED diffuser for the front Voron logo.\u003c\/strong\u003e This is the clear printed cover\/diffuser for the standard Voron Stealthburner LED opening, grounded to the official Voron file \u003cstrong\u003e[c]_stealthburner_LED_diffuser.stl\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy use this piece\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear PETG\u003c\/strong\u003e lets the logo lighting show through while diffusing the LED hotspots.\u003c\/li\u003e\n  \u003cli\u003eMatches the official Voron Stealthburner printed-part geometry for the LED diffuser position.\u003c\/li\u003e\n  \u003cli\u003eUseful as a spare if your original diffuser is scratched, cloudy, or missing during a toolhead build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePart: Stealthburner LED diffuser \/ clear LED cover\u003c\/li\u003e\n  \u003cli\u003eMaterial: \u003cstrong\u003eclear PETG\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eOfficial Voron reference: \u003cstrong\u003e[c]_stealthburner_LED_diffuser.stl\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eQuantity: \u003cstrong\u003e1\u003c\/strong\u003e clear diffuser cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor Voron printers using the Stealthburner toolhead. Pair it with the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-led-diffuser-mask\"\u003eVoron Stealthburner LED Diffuser Mask\u003c\/a\u003e and a Stealthburner LED kit such as the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit\"\u003eVoron Stealthburner Fastener and LED Kit\u003c\/a\u003e when you are building the complete logo-light assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNot the LED carrier, diffuser mask, PCB, LEDs, screws, or wiring.\u003c\/li\u003e\n  \u003cli\u003eNot an SLA resin diffuser; this one is printed in clear PETG.\u003c\/li\u003e\n  \u003cli\u003eNot a complete Stealthburner toolhead kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Perfect drop in” — verified buyer review\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43089940578526,"sku":"7728948130","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/shot_20220710084116_5147ded5-04a1-48ed-a887-fb7850bd3548.jpg?v=1657515774"},{"product_id":"voron-stealthburner-fastener-and-led-kit-rainbow-barf-edition","title":"Voron Stealthburner Fastener and LED Kit: Rainbow Barf Edition","description":"\u003cul\u003e\n\u003cli\u003eVoron Stealthburner Fastener and LED Kit:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eM3x50 SHCS (fully threaded) x 3\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eM3x25 SHCS (fully threaded) x 2\u003c\/li\u003e\n\u003cli\u003eM3x6 FHCS x 2\u003c\/li\u003e\n\u003cli\u003eM3 Threaded inserts x 2\u003c\/li\u003e\n\u003cli\u003e6mm x 3mm Round magnet x 1\u003c\/li\u003e\n\u003cli\u003eRGB LED x 3\u003c\/li\u003e\n\u003cli\u003eRGBW LED x 3\u003c\/li\u003e\n\u003cli\u003e30awg FEP 915mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRainbow Barf LED PCB by Lightweight Labware and vinnycordeiro\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43166397530334,"sku":"6607295008","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_0704_540x_a9e6c959-d669-4c0c-9f76-ffb73c2ad425.png?v=1658673381"},{"product_id":"26awg-stranded-fep-wire-x-10m","title":"26AWG Stranded FEP Wire x 10m","description":"\u003cp\u003e\u003cstrong\u003e10 m of 26 AWG stranded wire with FEP (fluorinated ethylene propylene) insulation\u003c\/strong\u003e for low-voltage 3D-printer wiring where a small, flexible conductor has to live near a hot toolhead, cable chain, or enclosed-printer wiring path.\u003c\/p\u003e\n\n\u003ch3\u003eWhy FEP instead of basic PVC hookup wire\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter heat margin around the toolhead.\u003c\/strong\u003e FEP insulation is used for high-temperature electronics wire, so it is a safer choice than ordinary PVC when the route passes near a hotend, heated chamber, or tight toolhead harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThin wall, cleaner bundles.\u003c\/strong\u003e FEP insulation keeps the outside diameter down, which matters in Voron-style cable chains, umbilicals, and toolhead looms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStranded conductor.\u003c\/strong\u003e This is stranded, not solid-core wire, so it is the right format for wiring that moves, bends, or needs to be dressed cleanly inside a printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor size:\u003c\/strong\u003e 26 AWG stranded copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e FEP, thin-wall fluoropolymer insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 m \/ 32.8 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black, as shown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse class:\u003c\/strong\u003e low-voltage 3D-printer signal and light-duty harness wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIntended use — 3D printer wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToolhead harnesses where 30 AWG feels too delicate but 24 AWG is bulkier than needed.\u003c\/li\u003e\n\u003cli\u003eStepper motor extension pigtails, endstop loops, probe wiring, fan leads, LED leads, and longer low-current signal runs.\u003c\/li\u003e\n\u003cli\u003eVoron, Klipper, ERCF, and other enclosed-printer builds where heat-resistant, flexible wiring is preferred.\u003c\/li\u003e\n\u003cli\u003ePairs cleanly with \u003ca href=\"https:\/\/dfh.fm\/products\/jst-xh-2-54-230pc-kit\"\u003eJST-XH connectors\u003c\/a\u003e and \u003ca href=\"https:\/\/dfh.fm\/products\/molex-micro-fit-dual-row-4-circuit-kit\"\u003eMicro-Fit 3.0 connector kits\u003c\/a\u003e for printer harness work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDecision guide — which FEP wire gauge do you want?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGauge\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003eWhy this gauge\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/dfh.fm\/products\/30awg-stranded-fep-wire-x-10m\"\u003e\u003cstrong\u003e30 AWG stranded FEP\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThermistors, probes, endstops, LEDs, and very tight signal bundles\u003c\/td\u003e\n\u003ctd\u003eThinnest and most flexible option for low-current signal wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e26 AWG stranded FEP (this listing)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStepper pigtails, longer signal runs, toolhead harnesses, small fans\u003c\/td\u003e\n\u003ctd\u003eMore current headroom and lower voltage drop while still staying compact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e24 AWG stranded FEP\u003c\/td\u003e\n\u003ctd\u003eHigher-current fan leads, short heater pigtails, and heavier harness sections\u003c\/td\u003e\n\u003ctd\u003eThicker conductor when the load needs more margin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat this wire is NOT for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated bed power.\u003c\/strong\u003e Bed wiring needs a much larger conductor sized for the actual bed current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC mains.\u003c\/strong\u003e Use properly rated mains cable and terminals for inlet, PSU, and bed mains wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong high-current heater runs.\u003c\/strong\u003e For heater cartridge power, size the wire to the current, run length, connector, and printer safety requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA substitute for checking current draw.\u003c\/strong\u003e Match wire gauge to the load before wiring motors, heaters, or accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eUse this 26 AWG FEP wire when you want a tougher, slightly more forgiving harness wire than 30 AWG without building a bulky loom.\u003c\/em\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43310878490846,"sku":"7516946202","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/23D14447-21E5-4108-9C48-9B88970784A5_1_201_a_cef9f1ac-6761-4de5-b5b8-30d703aa8200.jpg?v=1661292368"},{"product_id":"30awg-stranded-fep-wire-x-10m","title":"30AWG Stranded FEP Wire x 10m","description":"\u003cp\u003e\u003cstrong\u003e10 m of 30 AWG stranded wire with FEP (fluorinated ethylene propylene) insulation\u003c\/strong\u003e for the small-signal and short-run wiring inside 3D printers — hotend harnesses, toolhead PCBs, fans, micro-switches, thermistor and probe leads, and stepper pigtails where you want a thin, flexible conductor that survives heat and won’t melt back when it sits against a hotend.\u003c\/p\u003e\n\n\u003ch3\u003eWhy FEP instead of PVC\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat tolerance.\u003c\/strong\u003e FEP insulation is rated for continuous use to roughly 200 °C, so it sits happily right next to a hotend, heat-break or heated-chamber wiring path. PVC-insulated wire (the “hookup wire” from the parts bin) starts softening around 80 °C — fine in the electronics bay, not fine clipped to a Voron toolhead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThin wall, small bend radius.\u003c\/strong\u003e FEP wall is much thinner than silicone or PVC for the same voltage rating, which is the whole point of running 30 AWG — you get a smaller bundle in tight cable chains and looms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStranded core.\u003c\/strong\u003e This is stranded (multi-strand), not solid. It flexes with motion so it’s the right call for moving parts: cable chains, hinged panels, hotend docks, anything that bends on every print.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e stranded copper, 30 AWG (cross-section ~0.05 mm²)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e FEP (fluorinated ethylene propylene), thin wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous temperature rating:\u003c\/strong\u003e up to ~200 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage rating:\u003c\/strong\u003e 300–600 V class (insulation-class dependent — well above anything on a 12\/24 V printer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 m (32.8 ft) on a single spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e one color per spool, randomly selected from stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIntended use — 3D printer low-current signal wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHotend fan leads, hotend thermistor extension, hotend heater extension when you’re running a thin flexible tail.\u003c\/li\u003e\n\u003cli\u003eEndstop \/ probe signal wires, especially on Voron toolheads and Klicky \/ Voron Tap \/ Boop probes where a thin, flexible lead is the difference between the cable chain closing cleanly and not.\u003c\/li\u003e\n\u003cli\u003eStepper motor extension pigtails where 4-conductor ribbon would be overkill.\u003c\/li\u003e\n\u003cli\u003eLED strips, panel indicators, neopixel \/ WS2812 data lines, small fans that draw well under an amp.\u003c\/li\u003e\n\u003cli\u003eAny 3D-printer signal path that needs to be thin, flexible, and survive the heat of a toolhead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this wire is NOT for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated bed power.\u003c\/strong\u003e A 30 AWG conductor cannot safely carry the 5–15 A an AC or DC bed draws. Use 14–18 AWG silicone wire for the bed loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend heater cartridge power (long runs).\u003c\/strong\u003e Fine for a short pigtail right at the hotend; not the right wire for the long run from the SSR \/ MOSFET to the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepper motor phase windings at full rated current.\u003c\/strong\u003e Steppers can pull 1–2 A per phase; 30 AWG is borderline for long motor extensions. Use 22–24 AWG for motor runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC mains.\u003c\/strong\u003e This is low-voltage signal \/ signal-and-low-power wire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDecision guide — which of our FEP wires do you want?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGauge\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003eWhy this gauge\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30 AWG stranded (this listing)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eToolhead signal \u0026amp; short pigtails, fans, thermistors, endstops, neopixels\u003c\/td\u003e\n\u003ctd\u003eThinnest, most flexible — for tight cable chains and short runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e26 AWG stranded\u003c\/td\u003e\n\u003ctd\u003eStepper motor extensions, longer signal runs, micro-switch loops\u003c\/td\u003e\n\u003ctd\u003eStep up the current headroom and voltage drop while staying flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e24 AWG stranded\u003c\/td\u003e\n\u003ctd\u003eHeater cartridge pigtails at the hotend, fans drawing more current, RGB data runs\u003c\/td\u003e\n\u003ctd\u003eThicker conductor for higher current without going stiff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eStranded FEP wire — the standard “when in doubt, use this\" 3D-printer signal wire. If you are wiring a Voron toolhead, an ERCF, a Stealthburner, a Klicky probe, or any short flexible sensor\/fan lead on a hot printer, this is what you reach for.\u003c\/em\u003e\u003c\/p\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43311829713118,"sku":"9729293388","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/23D14447-21E5-4108-9C48-9B88970784A5_1_201_a_8abda54d-0dcd-4f8c-b6b8-c8fee9d1c2c2.jpg?v=1661309295"},{"product_id":"5015-clear-fan-rear-housing-by-jake","title":"5015 Clear Fan Rear Housing by Jake","description":"\u003cp\u003e\u003cstrong\u003eClear PETG rear housing for the 5015 Stealthburner fan mod.\u003c\/strong\u003e This printed Jake design re-houses a GDSTime-style 5015 blower fan so Stealthburner LEDs can shine through the rear of the fan.\u003c\/p\u003e\n\u003ch3\u003eWhy use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the \u003cstrong\u003e5015 Clear Fan Rear Housing\u003c\/strong\u003e Printables model by Jake \/ AllAboutJake.\u003c\/li\u003e\n\u003cli\u003eClear PETG construction keeps the fan body translucent for RGB \/ NeoPixel lighting effects.\u003c\/li\u003e\n\u003cli\u003ePairs with Stealthburner LED setups such as the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit\"\u003eVoron Stealthburner Fastener and LED Kit\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/rainbow-barf-led-pcb-by-whoppingpochard-and-vinnycordeiro\"\u003eRainbow Barf LED PCB\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and install notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntended for Voron Stealthburner builds using a \u003cstrong\u003e5015 blower fan\u003c\/strong\u003e; see the source model and instructions on \u003ca href=\"https:\/\/www.printables.com\/model\/273994-5015-clear-fan-rear-housing\"\u003ePrintables model 273994\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eThe source instructions require cutting a GDSTime 5015 fan down to the PCB, then gluing the PCB into this rear housing.\u003c\/li\u003e\n\u003cli\u003eAuthor note: the mod is experimental and should be installed carefully to avoid damaging the fan motor or axle clip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a complete fan assembly, PCB, LED board, or Stealthburner kit.\u003c\/li\u003e\n\u003cli\u003eNot a drop-in fan swap; it is a printed mod for builders comfortable disassembling a 5015 blower.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Worked perfectly with disassembled 5015 fan and a little gorilla glue.”\u003c\/blockquote\u003e","brand":"dfh.fm","offers":[{"title":"Default Title","offer_id":43539421364446,"sku":"4467794724","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/46D7CB4D-4485-42DB-8976-28516478A59F.jpg?v=1666067948"},{"product_id":"voron-stealthburner-led-diffuser-mask","title":"Voron Stealthburner LED Diffuser Mask","description":"\u003cp\u003e\u003cstrong\u003eBlack printed LED diffuser mask for the Voron Stealthburner toolhead.\u003c\/strong\u003e This is the outer mask piece that frames the Stealthburner LED diffuser area; Voron publishes it as \u003ccode\u003e[o]_stealthburner_LED_diffuser_mask.stl\u003c\/code\u003e in the official Stealthburner STL set.\u003c\/p\u003e\n\u003ch3\u003eWhy use this part\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrop-in replacement for the Stealthburner LED diffuser mask position.\u003c\/li\u003e\n\u003cli\u003eClean black frame around the diffuser openings so the lit area stays defined.\u003c\/li\u003e\n\u003cli\u003eUseful when finishing a Stealthburner build or replacing a marked, warped, or mismatched printed mask.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProject:\u003c\/strong\u003e Voron Stealthburner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOfficial source file:\u003c\/strong\u003e \u003ccode\u003e[o]_stealthburner_LED_diffuser_mask.stl\u003c\/code\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e one printed LED diffuser mask\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairing\u003c\/h3\u003e\n\u003cp\u003ePair it with the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-clear-led-cover\"\u003eVoron Stealthburner Clear LED Cover\u003c\/a\u003e and a Stealthburner LED hardware option such as the \u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit\"\u003eVoron Stealthburner Fastener and LED Kit\u003c\/a\u003e when you are building out the lit toolhead face.\u003c\/p\u003e\n\u003ch3\u003eWhat it is not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot the clear diffuser\/cover.\u003c\/li\u003e\n\u003cli\u003eNot the LED carrier.\u003c\/li\u003e\n\u003cli\u003eDoes not include LEDs, fasteners, wiring, or the Stealthburner toolhead.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dfh.fm","offers":[{"title":"Black","offer_id":43559058702558,"sku":"6954771753","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_326952.jpg?v=1666416568"},{"product_id":"ldo-363sth20-1004ahgdfh","title":"LDO-36STH20-1004AHG(DFH)","description":"\u003cp\u003e\u003cstrong\u003eLDO high-temperature NEMA 14 pancake stepper for compact direct-drive extruders.\u003c\/strong\u003e The 36STH20-1004AHG(XH) is the LDO Motors 1.8° pancake motor used where a small, heat-tolerant extruder motor matters more than frame size.\u003c\/p\u003e\n\u003ch3\u003eWhy this motor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temperature build:\u003c\/strong\u003e LDO specifies Class H insulation for operation up to \u003cstrong\u003e180°C\u003c\/strong\u003e, with materials selected for heated 3D-printer environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact extruder format:\u003c\/strong\u003e NEMA 14 pancake body with a \u003cstrong\u003e20 mm\u003c\/strong\u003e motor length for tight toolhead packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated drive gear:\u003c\/strong\u003e KB-3D’s spec lists a \u003cstrong\u003e2.5 mm shaft with integrated 10-tooth gear\u003c\/strong\u003e, the format commonly used in compact extruders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady wiring:\u003c\/strong\u003e integrated \u003cstrong\u003e1 m\u003c\/strong\u003e high-temp Teflon lead with \u003cstrong\u003eJST-XH\u003c\/strong\u003e termination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e LDO-36STH20-1004AHG(XH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e NEMA 14 pancake stepper motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep angle:\u003c\/strong\u003e 1.8°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 1.0 A\/phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Class H \/ 180°C insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e JST-XH on integrated high-temp lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse this as a compact extruder motor for Voron-style direct-drive toolheads and similar builds that call for the LDO 36STH20-1004AHG family, including Clockwork 2 \/ Stealthburner, Galileo, Orbiter-style and other tight extruder packages when the BOM matches this motor.\u003c\/p\u003e\n\u003ch3\u003eCompatibility notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the connector pinout and gear requirement against your extruder BOM before installation.\u003c\/li\u003e\n\u003cli\u003eThis is a stepper motor, not a complete extruder kit and not a stepper driver.\u003c\/li\u003e\n\u003cli\u003eUse a current-capable stepper driver such as the live \u003ca href=\"https:\/\/dfh.fm\/products\/btt-tmc2209-v1-2-stepper-driver\"\u003eBTT TMC2209 v1.2 Stepper Driver\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/btt-ez2209-stepper-motor-driver\"\u003eBTT EZ2209 Stepper Motor Driver\u003c\/a\u003e where your control board supports it.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":43977414574302,"sku":"3107393092","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/IMG_3999.jpg?v=1675795201"},{"product_id":"btt-3m-can-bus-cable","title":"BTT 3m CAN Bus Cable","description":"\u003cp\u003e\u003cstrong\u003eOriginal BigTreeTech CAN bus cable for clean Klipper toolhead wiring.\u003c\/strong\u003e This 3m BTT CAN cable is the plug-and-route harness used with BTT CAN toolhead setups, especially StealthBurner-style EBB SB2209\/SB2240 installs.\u003c\/p\u003e\n\u003ch3\u003eWhy use this over building a harness from scratch?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-terminated BTT CAN cable:\u003c\/strong\u003e sold by BigTreeTech as the “Only CAN Cable” option for the EBB SB2209\/SB2240 CAN\/USB StealthBurner product family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3m length:\u003c\/strong\u003e enough reach for most enclosed Voron-style motion paths without splicing short leads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner toolhead wiring:\u003c\/strong\u003e routes CAN communication and toolhead power through one dedicated cable path instead of a large bundle of individual wires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e BigTreeTech \/ BTT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer SKU \/ MPN:\u003c\/strong\u003e 3040020490\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse case:\u003c\/strong\u003e CAN bus toolhead wiring for Klipper printers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisual ID:\u003c\/strong\u003e black flat harness with molded connector and visible green\/yellow twisted CAN pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and pairing\u003c\/h3\u003e\n\u003cp\u003eUse this with a CAN toolhead board such as the \u003ca href=\"https:\/\/dfh.fm\/products\/btt-sb2040\"\u003eBTT EBB SB2240 CAN V1.0\u003c\/a\u003e and a host-side CAN adapter such as the \u003ca href=\"https:\/\/dfh.fm\/products\/u2c-can-interface-board\"\u003eU2C CAN Interface Board\u003c\/a\u003e. If you prefer cutting and terminating your own umbilical, compare it with \u003ca href=\"https:\/\/dfh.fm\/products\/igus-chainflex%C2%AE-cf113-007-d\"\u003eIgus Chainflex® CF113-007-D\u003c\/a\u003e sold by the foot.\u003c\/p\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the cable only; it does not include a toolhead board, U2C adapter, CAN terminator, or printer-side mount hardware.\u003c\/li\u003e\n\u003cli\u003eConfirm your board-side connector and pinout before powering the toolhead. CAN wiring mistakes can damage electronics.\u003c\/li\u003e\n\u003cli\u003eFor EBB36\/EBB42 or non-StealthBurner layouts, check connector compatibility before assuming it is drop-in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":44099652616414,"sku":"1021754218","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/1_5_600x_66a031c1-a99f-425b-b408-624c1b432e57.jpg?v=1679719988"},{"product_id":"btt-sb2040","title":"BTT EBB SB2240 CAN V1.0","description":"\u003cp\u003e\u003cstrong\u003eBIGTREETECH EBB SB2240 CAN V1.0 is a Klipper toolhead board for Voron StealthBurner builds.\u003c\/strong\u003e It puts the extruder driver, hotend outputs, fans, probe\/sensor wiring, ADXL345 accelerometer, and USB\/CAN communication on the toolhead to cut the moving harness down to a cleaner CAN or USB setup.\u003c\/p\u003e\n\u003ch3\u003eWhy use this board\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStealthBurner-specific layout:\u003c\/strong\u003e the EBB SB2240\/2209 CAN V1.0 family is documented by BIGTREETECH for Voron StealthBurner toolhead use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTMC2240 version:\u003c\/strong\u003e onboard TMC2240 stepper driver in SPI mode for the extruder motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner toolhead wiring:\u003c\/strong\u003e supports CAN bus or USB communication instead of running every hotend, fan, probe, and extruder lead back through the cable chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in input-shaper hardware:\u003c\/strong\u003e onboard ADXL345 accelerometer for resonance measurement in Klipper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard:\u003c\/strong\u003e BIGTREETECH EBB SB2240 CAN V1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Voron StealthBurner toolhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Klipper only, per BIGTREETECH documentation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e STM32G0B1CBT6 Arm Cortex-M0+ at 64 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepper driver:\u003c\/strong\u003e onboard TMC2240, SPI mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication:\u003c\/strong\u003e CAN bus or USB Type-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput power:\u003c\/strong\u003e DC \u003cstrong\u003e12–24V\u003c\/strong\u003e, rated \u003cstrong\u003e9A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend heater output:\u003c\/strong\u003e E0, up to \u003cstrong\u003e5A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFans:\u003c\/strong\u003e two controllable fan outputs plus one 4-wire fan interface; fan output up to \u003cstrong\u003e1A\u003c\/strong\u003e each, \u003cstrong\u003e1.5A\u003c\/strong\u003e peak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensors \/ expansion:\u003c\/strong\u003e EndStop, ABL, RGB, PT100\/PT1000, USB, CAN, SPI; onboard ADXL345\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard size:\u003c\/strong\u003e \u003cstrong\u003e68.5 × 42.5 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/u2c-can-interface-board\"\u003eU2C CAN Interface Board\u003c\/a\u003e when your controller setup needs a USB-to-CAN bridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/btt-3m-can-bus-cable\"\u003eBTT 3m CAN Bus Cable\u003c\/a\u003e for a ready CAN harness run.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/dfh.fm\/products\/voron-stealthburner-fastener-and-led-kit\"\u003eVoron Stealthburner Fastener and LED Kit\u003c\/a\u003e if you are refreshing the StealthBurner assembly around the electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGotchas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the \u003cstrong\u003eSB2240 \/ TMC2240\u003c\/strong\u003e version, not the SB2209 \/ TMC2209 version.\u003c\/li\u003e\n\u003cli\u003eUse the VUSB jumper only when powering the board over USB for flashing or setup; follow BIGTREETECH wiring docs before applying printer power.\u003c\/li\u003e\n\u003cli\u003eCAN setup still requires correct firmware, termination, and host configuration. If you want simpler commissioning, check whether USB mode fits your build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e“Perfect, follow directions flashes as intended.”\u003c\/blockquote\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":44099657203934,"sku":"3429332652","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/products\/2240-2_600x_4fe7d4d9-900d-4297-846b-341efb65bbc5.jpg?v=1679720202"},{"product_id":"ldo-36sth20-1004ahgxh-dfh","title":"LDO-36STH20-1004AHG(XH)(DFH)","description":"\u003cp\u003e\u003cstrong\u003eLDO high-temperature NEMA 14 pancake stepper for compact direct-drive extruders.\u003c\/strong\u003e The LDO-36STH20-1004AHG(XH) is a 1.8° LDO Motors stepper built for tight toolhead packaging, with a 20 mm body, 1.0 A\/phase rating, and integrated 10-tooth gear.\u003c\/p\u003e\n\u003ch3\u003eWhy this motor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temperature construction:\u003c\/strong\u003e LDO specifies Class H insulation, with windings, bearings, magnetic steel, and plastic skeleton selected for up to \u003cstrong\u003e180°C\u003c\/strong\u003e insulation class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact extruder format:\u003c\/strong\u003e NEMA 14 pancake frame with a \u003cstrong\u003e20 mm\u003c\/strong\u003e body keeps weight and stack height down on direct-drive toolheads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated drive gear:\u003c\/strong\u003e LDO lists a module 0.5, \u003cstrong\u003e10-tooth\u003c\/strong\u003e gear with 20° pressure angle; KB-3D lists the 2.5 mm shaft \/ integrated 10T format for this motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnown Voron-style fit:\u003c\/strong\u003e commonly used for compact extruders such as Clockwork 2 \/ Stealthburner, Galileo, Orbiter-style, LGX Lite, and Sherpa Mini when your BOM calls for this motor family.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e LDO Motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e LDO-36STH20-1004AHG(XH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e NEMA 14 pancake stepper motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep angle:\u003c\/strong\u003e 1.8° ± 5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 2.1 V\/phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 1.0 A\/phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance:\u003c\/strong\u003e 2.1 Ω\/phase ±15%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInductance:\u003c\/strong\u003e 1.6 mH\/phase ±20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding torque:\u003c\/strong\u003e 100 mN·m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeads:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. weight:\u003c\/strong\u003e 85 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear:\u003c\/strong\u003e module 0.5, 10 teeth, 20° pressure angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eUse this as a compact extruder motor for 3D-printer toolheads and Voron-style direct-drive builds that specifically call for the LDO 36STH20-1004AHG(XH) high-temperature NEMA 14 motor.\u003c\/p\u003e\n\u003ch3\u003eCompatibility notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck your extruder BOM, gear requirement, connector, and pinout before installation.\u003c\/li\u003e\n\u003cli\u003eThis is a stepper motor, not a complete extruder, not a drive-gear kit, and not a stepper driver.\u003c\/li\u003e\n\u003cli\u003ePair with a compatible controller\/driver such as the live \u003ca href=\"https:\/\/dfh.fm\/products\/btt-tmc2209-v1-2-stepper-driver\"\u003eBTT TMC2209 v1.2 Stepper Driver\u003c\/a\u003e or \u003ca href=\"https:\/\/dfh.fm\/products\/btt-ez2209-stepper-motor-driver\"\u003eBTT EZ2209 Stepper Motor Driver\u003c\/a\u003e where your board supports it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\"Feeds plastic plus has a dfh initials what’s not to like\"\u003c\/blockquote\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":44332349751518,"sku":"2295209471","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0556\/9767\/0313\/files\/IMG_3999_b27240bf-7b74-4853-bc9e-3849166202ce.jpg?v=1693602635"}],"url":"https:\/\/formosissima.myshopify.com\/collections\/voron-stealthburner.oembed","provider":"dfh.fm","version":"1.0","type":"link"}